Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Improve Thumbnail Rendering for Thin Geometry and Surfaces in Creo View AdaptersArchived

1. Describe the ProblemImprove Thumbnail Rendering for Thin Geometry and Surfaces in Creo View AdaptersIssue Description:In the CAD Details Page, we’ve observed that thick cables and certain surfaces visible in the Creo model are not appearing in the generated static thumbnails (JPEG files). This leads to an incomplete visual representation and affects usability for downstream users relying on these previews.Requested Enhancement:We request an enhancement to improve the rendering quality of static thumbnails generated by Creo View Adapters. Specifically:Ensure visibility of thin geometry such as cables.Improve surface rendering fidelity.Automate thumbnail generation to better reflect the actual model geometry.Impact:Improved thumbnail quality will enhance user experience, reduce misinterpretation, and support better decision-making during design reviews and documentation.Reference:PTC Case Discussion and Article CS67713.2. Are you using a workaround?Workaround: we are using the creo view for viewing this kind of model3. What is the use case for your organization?Our team uses Creo View Adapters to generate thumbnails for CAD models. These thumbnails are critical for quick visual identification and review. However, when key geometry such as thick cables or specific surfaces are missing, it causes confusion and reduces the effectiveness of the CAD Details Page.4. What impact does this problem currently have on your organization?All engineering users are affected.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Sheetmetal Blend - Request for ImprovementAcknowledged

There are multiple posts asking how to blend a square to circle, but instead of "rolling" the corners (Die Formed) some would like the Brake Formed method (rounds divided into equal bends/facets) and all involve a rather complex workaround that don't always have the best results. This is a request for enhancement as even a tool like Fusion360 has the option to switch between the two.You can see it here: https://youtu.be/g4LYh2__uqE?t=168If the link doesn't work, just search on Youtube "Fusion360 - Lofted Flange Closed Profile". In the video you can see that a simple square and a simple circle are drawn offset from each other and a lofted feature is used, the only "hiccup" in the video was adding a rip... That's it. Whereas in Creo:- Your square needs rounded corners (fillets) and said rounds need to be manually drawn in facets.- The circle needs to be faceted as well (you can't just draw a circle).- The facets of the "circle" need to be parallel to the line entities in the square as this can cause the surface(s) to twist (if this happens, you can still create the sheetmetal but unable to make a flat pattern). Like I said, this is a request for an enhancement. There are already multiple posts on how others have achieved this (linked below) but it just feels wrong that in a tool like Creo, this functionality doesn't exist. Here is a link to the topics where they discuss the workaround:https://community.ptc.com/t5/3D-Part-Assembly-Design/How-can-I-unbend-square-to-ellipse-blend-in-creo-sheetmetal-I-am/m-p/156772https://community.ptc.com/t5/3D-Part-Assembly-Design/Sheetmetal-unbend-fails-for-a-swept-blend/m-p/867068#M128641 Creo version: 11.0.1.0 

Flat instance / Flat representation for embedded sheetmetal components (in an inseperable assembly)Acknowledged

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We're an OEM in the textile industry. Development of yarn winding, processing and handling machines.We work a lot with sheetmetal, often using inserts.2. What version of Creo Parametric are you currently running?Creo 9.0.2Windchill 12.1.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.A sheetmetal part cannot have representations or a family table.This makes it impossible to produce a flat instance or flat representation.This makes it impossible to add a flat state to a drawing.4. What is the use case for your organization?In our ERP system, we assign a partnumber to a bend part, with its inserts and paint.The reason we do this, is to minimise administration during the seperate steps and because inserts are often inserted in the flat state.We're currently switching from Modeling. In modeling we solved this by adding the inserts in a 'container'. Since Parametric doesn't have containers, we would resort to an inseperable assemblies.An assembly, (representing the finished part with inserts and paint) would hold an embedded component,(the sheetmetal part) and the inserts.This seems to meet all our demands, except for the flat state, which we cannot put on drawing...5. What business value would your suggestion represent for your organization?Our work around is using a seperate partnumber for the sheetmetal part, leaving several opportunities for mistakes as assemblies and parts can be mismatched during check-out, copying, release,...

Family table option when replacing Extern Copy Geometry sourceAcknowledged

To improve the top-down design methodology when designing variations based uppon a skeleton that's a family table, we'd like to suggest this improvement.Youtube unlisted video: This is the setup:A skeleton that contains a family table with the refs for a 3/4/5m machine, those refs are packed in a publish geometry.That Published geometry is taken in with an external copy geometry and used in different features.When saved to a new variant for 3Meter machine.And the skeleton is renamed as well.It's still looking at the original skeleton source for 4 meter.We can do an edit definition and point to the source of the instance of 3 Meter, which has the same feature numbers and ID's.But Creo doesn't treat the family table part as the same or connected, and all features fail:So if there could be an option to replace the source parameter to a family table member, retaining the feature number and ID's, that would save a lot of time rebuilding all the dependent features. Please mind this old idea , showing that it's somewhat possible if the machines would be a family table as well, though mind that a good advice for family tables is that the instances should somehow be 90-95% the same construction. It's no use having 3/4/5 meter variations of assemblies in a family table when they contain a lot of different parts.Replace External Copy Geometry By Instance - PTC Community Please mind that the demo-files are made in creo 7.0.6 

Universal Browser installation for all users DOESN'T WORKAcknowledged

1. Describe the ProblemPTC Universal Browser is intended to facilitate the updates for embedded chromium browser for Creo.By default it's installed in local user directory in C:\Users\%USERNAME%\AppData\Local\PTC\Creo\CEFTherefore to install it for all users of the computer/server, either each user has to install it themselves (which is not always possible e.g. due to user/machine policy restrictions), or it can be installed in another directory (user-agnostic) using e.g. the following command: msiexec /i "C:\Temp\ptcuniversalbrowser.msi" INSTALLDIR="C:\Creo\Common Files\Universal Browser Utility" ALLUSERS=1 /qn In that case however, even though it's displayed as installed for all users, the registry keys responsible for Creo recognizing the updated CEF path are only applied to the user who installed the package - this is an evident error of the installer. The registry keys have to be exported manually from the account which installed the Universal Browser and imported by the user which would be using the computer, in order for the Chromium engine to be actually updated:HKEY_CURRENT_USER\Software\PTC\Zbrowser  This should be fixed.The MSI installer should be able to update registry keys for all users if option ALLUSERS=1 is used.2. Are you using a workaround?The registry keys can be copied manually.3. What is the use case for your organization?Manual effort needed to properly install & update the Universal Browser4. What impact does this problem currently have on your organization?Difficulties in implementing the Universal Browser with automated package distribution (SCCM) and install on servers with policy restrictions. May be critical if it prevents the installation at all - very high impact & priority, security affected due to inability to update Chromium engine!

smooth merge surfacesArchived

1. Describe the Problemintroducing APPROXIMATE SURFACE feature will help a lot and I dreamed about such feature a lot since years 😉it helps very often to fix problem with surface when in one corner both boundaries X and Y are tangent to the same reference like in this example:APPROXIMATE SURFACE help to solve this problem due to extend this surface and convert into single together with neighbor surface:but sometimes result of APPROXIMATE SURFACE is not as expected due to lack of quality and many waves on converted surface even when play a lot with following parameters:and sometimes is better to limit the conversion only for necessary smallest possible area:I dream about feature (it can be new one or just an additional option in MERGE feature etc.) when one quilt will be converted into single surface:from this many surfaces quiltto this -> single surface without tangent edges inside  The aim here is to obtain exactly the same geometry as the source quilt, but without deformations like for example here:   2. Are you using a workaround?I am using APPROXIMATE SURFACE feature and in general I try to work on smallest possible area to get acceptable result3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Bolt Circle Center MarkAcknowledged

1. Describe the ProblemCreo does not allow you to create a bolt circle center marks within the drawing. A bolt circle pattern or feature has to be created using the hole feature, set as diametric, within the part file. If this feature is created using a diametric hole type in the part, then this will allow you to Annotate the bolt circle center marks properly in the drawing.The issue is that most do not create a bolt circle pattern using the diameter type within the hole feature. Most are created using a sketch and then extruding material. Creo does not recognize the center point of and extrude, so center marks do not annotate.2. Are you using a workaround?Yes. A datum point has to be added to the sketch to get a center mark. The center mark only allows for a linear dimensions, not a diametric. To get a diametric center mark, you need to create a cosmetic sketch or create a sketch on the drawing. This is time consuming and unnecessary.3. What is the use case for your organization?Add a center Circular Center Mark button in the drawing. (Inventor and SolidWorks) both have one. The Circular Center Mark button will be in the Annotations Tab in a drawing. Once the button is selected, you select a diameter on your part and then each hole (or Feature) that pertains to that specific bolt circle.4. What impact does this problem currently have on your organization?Throughout the entire company this issue impacts at least 500 designers, costing ~83 hours a year in time lost doing work-arounds.

Improve the Extrude to make it more robust to design changesArchived

1. Describe the ProblemWhen creating solids and surfaces with an extrusion, the default depth setting is "Variable". When cutting solids or surfaces with an extrusion, we have the possibility to select "Through all" to avoid having to change dimensions if the solid or surface we want to cut is enlarged. This guarantees resiliance to design changes. But when creating solids or surfaces, the same resiliance does not exist. We might want to create another body to use as a tool to cut an existing body. Or create an extruded surface to cut a solid. Since we only are allowed to specify a distance or specify a datum plane as reference, it forces us to create those datum planes even for common use cases. a) The idea is to provide another extrude option when adding material to replace the non-working option of "Through all" that only workds for cuts. This option could be called "Beyond" and it would allow the extrusion to be made up-to the extents of a selectable reference, which could be a body, a quilt, or a surface.. If the user does not select a reference and is extruding a surface, the extents would go beyond the bounding box of the active body. b) When adding the "Beyond" option the UI would automatically provide a field to specify an offset beyond the limits of the bouiding box of the referenced geometry. DEfault offset would be zero. This would avoid having to make another click in another checkbox to specify the offset value that exists for regular "Up To Reference". c) Would work for both sides.2. Are you using a workaround?There are two workarounds: a) Use "Variablle" and specify a distance, visually provide a bigger value, and hope for the design to not change, since it could fail with a Creo error, or fail silently. b) Use "To Reference" and waste additional time creating parallel planes referenced to the maximum of the referenced geometry. Time consuming when trying to create up-to references and referencing cylindrical surfaces, since the planes have to be tangent to the geometr, and in other cases, it might be difficult to determine the extents of the geometry. c) Waste additional time creating a "Enclusere Volume" or "boduding box" for the selected geometry, orient the box paralell to the future sketch plane, make the bouding box create quilt geometry, and finally create the Extrude feature and select "To reference"  to reference the maximum (or minunum or both) of the bouding box.3. What is the use case for your organization?Making design both more efficient and more robust for a very common design pattern.4. What impact does this problem currently have on your organization?Wasted time and frustration to have to use any of the workarounds.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.