Skip to main content
Sep 5, 2025 9:42 AM UTC
Archived

Change the default Extruded Cut depth to Through All.

Related products:Creo Parametric

1. Describe the Problem

When cutting solids and surfaces with an extrusion, the default depth setting is "Variable".

 

I find that the vast majority of times when I do those, I intend to cut Through All. By orders of magnitude.

 

So I find myself toggling from "Variable" to "Through All" again and again, and it is annoying.

 

Also: for some reason when I cut surfaces, the default direction is AWAY from the surface, which is rather odd. How often is that the intent? I cannot recall a single time where I have sketched on a surface only to cut another surface with it. In those situations, I usually sketch on the surface I want to cut, or on some datum plane.

 

Please change both defaults.


2. Are you using a workaround?
Yes, I peck around with my mouse pointer the required extra times.

3. What is the use case for your organization?
No relevant answer to this question.

4. What impact does this problem currently have on your organization?
Takes time and causes frustration.



Status changed to: Archived 2026-07-06

We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.

You can always post a new idea with all the details required in the form.

Thank you for your participation.

This topic has been closed for replies.

9 replies

Community Manager
Sep 5, 2025 11:20 AM UTC
Status changed to: Clarification Needed

Thank you @CAD_Monkey for publishing your idea. However, I'd like to suggest adding screenshots/a video to help users, as well as Project Managers to better visualize the issue and your idea. You may simply add them as a comment to your idea. 

Please let us know within the next two weeks.

Best regards,
Catalina 

Sep 5, 2025 11:26 AM UTC

Anyone having used Creo for ten minutes will know exactly what I am speaking of.

 

No, I am not sourly exaggerating for dramatic purposes - extruding sketches is sort of the basis for everything that Creo does. Creating a body or surface that way is likely the most common operation, while cutting it like I describe is probably in the second place. 

 

Sep 5, 2025 11:53 AM UTC

A valid work-around for this would be to make a mapkey that starts the extrude function and presets the depth option as desired, but that workaround may limit the ability to pre-select a sketching plane (untested assumption).

This idea is very similar to https://community.ptc.com/t5/Creo-Parametric-Ideas/config-option-to-make-default-Extrude-depth-Symmetric/idi-p/814425 and if you read the comments, proposes to have the setting "match" the last chosen extrude depth instead of defaulting to one specific one along with the reasoning that changing the default from one to another would be "controversial" for lack a better word.

 

StephenW_0-1757072605764.png

 

Sep 5, 2025 11:59 AM UTC

Eventually presets will solve this problem. PTC has stated that presets are coming to all ribbon interfaces.

Sep 5, 2025 12:07 PM UTC

That is good to hear.

 

A preset or matching the last selected is more clever than just changing the default to Through All.

 

Sep 5, 2025 7:04 PM UTC

I also agree with the default Through All for the Extrude Cut, since it's what we use the most.

I hope that with the Presets this get's fixed, but I suspect that there will be no distinction for the Extrude if it is cutting material or adding material to have it use the last option. The consequeces is that we probably will have to select the preset when we vary from wanting to cut or add material, picking the appropriate Preset. It would be better to have the "Last Used Preset" take into account the kind of variation and pick the last used options for that kind of variation.

Sep 5, 2025 7:43 PM UTC

Related to this idea, is to add the option to remove from the list the "Through all" when adding material. If we click OK there will always be a regeneration failure.

 

But instead of having a "Thtrough all" that does not work when adding material, be it solid or a a quilt, this not functioning option could be changed for an equivalent one that would work. We might want to create an extruded surface to later be used to cut a part. Currently we are forced to specify the distance with "Variable" option. But if the base solid we want to cut, gets enlarged, the quilt we made to cut it will not be long enough to cut it. So, we are forced to create a plane and extrude up to plane, to have the quilt be extruded with a more robust design intent.

 

 

Sep 6, 2025 11:29 AM UTC

The more I think of it, the more I like the "repeat last setting" thing.

Community Manager
Sep 8, 2025 2:00 PM UTC
Status changed to: Acknowledged

Thank you @CAD_Monkey for your idea. Based on the information you and everyone else provided, we are acknowledging it as the Community management team. This is not a commitment from the Product team. Other users may comment and vote your idea up.