Recently active
Hello Praveen,can you elaborate a little more on your restrictions?1. Why would you not use family tables, when this is the ideal method to create such drawings? (you can use the same drawing with different instances of the family)2. What do you mean with interchangeable parts? Are you considering to use interchange assemblies?If you replace a part by another (unless it is a family table part), relations will no longer apply.However, you may use layers (notebook) to contain relations and apply the same layer to all parts to maintain.Or do you mean that there is a relation between the corresponding dimensions of the different parts?Gunter
can you measure the angle and use a 'MOD' command to get multiples of 90degrees? Basically take the integer result of the angle divided by 90 degrees andthen multiplying the integer result back by 90 degrees? Christopher F. Gosnell FPD Company124 Hidden Valley RoadMcMurray, PA 15317
With our use of Team Center, the Favorites don't come into play as much anymore for me. But I just saved a favorite and it updated the files. We are still on WF4.The files:web_favorites.xmlweb_history.xmlconnections_conf.xmlgo in the following directory at our companyC:\Documents and Settings\<username>\Application Data\PTC\ProENGINEER\Wildfire\.wf\.SettingsThey are the keepers of the Favorite directory locations you save in Pro-E. When editing your Pro-E Favorites, all three files are updated and saved upon a clean exit from Pro-E.Doug
Which line is erroring out? I suspect it might be on thecheckoutFile(s), perhaps? I've not done WebLink, but in JLink, I use thesession.RetrieveModel(ModelDescriptor) directly. Of course, this onlyworks if the dm_search_primary config.pro option is enabled in Pro/E. BK
Thanks to those who repliedWe decided not to dig into this too deep.We came up with a workaround.We added a view, master representation, scale 1:1000 to the drawing.Drawing now opens without problems and independant of the freeze_failed_assy_comp setting
We were using Microsoft Sans Serif but switched to Pro/E's generic font a year ago. Reason; it was decided the amount of data on the engineering server was too much and needed to be reduced. A 2-page drawing using Microsoft Sans Serif was nearly 3 MB, and once switched to the generic font was only 110 KB, that's over 25 times size reduction. This then raised the issue you have of the powers that be not liking the appearance. Now we pdf all drawings before printing, and make these available to non-engineering personnel. The exported pdf changes the font to Arial and people are happy with the appearance once again. The problem we had was changing all our formats, and then testing the pdf to get the text to appear correct in the pdf. The text in the drawing when viewed in Pro/E is screwy, but I've become used to this minor annoyance. This is on WF3 M140.
MikeI have exactly the same problem. But it seems hat this is an unsolvable problem.Or may you got a solution in the meantime from somewhere else?RegardsJuergen
I left out an important piece of information. I need this to happen within a relation.This is what I thought would work, but I keep getting an error.ABA_NOTES = PIN_DIA + "X" + LENGTH Regards, Rob Devaux Sr. Tool Designer ABA-PGT, Inc. 10 Gear Drive Manchester, CT. 06042-0270 United States of America (860)649-4591 ext. 120 fax (860)643-7619 rdevaux@abapgt.com www.abapgt.com
Look at the documented restrictions on ProMacroExecute().BobBob MonatJerand Technical Services, Inc.bob@jerand.comwww.jerand.com1-317-875-6087On Fri, Mar 20, 2009 at 12:56 AM, Nikhil Gothankar <-> wrote:> Dear Friends,>> I am having a mapkey. it works fine under normal pro/e working, but if i> try to run it using tollkit via macro functions *ProMacroExecute *it> return -26 (PRO_TK_NOT_VALID).>> mapkey new @MAPKEY_NAMEnew1;@MAPKEY_LABELnew1;~ Command `ProCmdModelNew`> ;\> mapkey(continued) ~ Select `new` `Type`1 `Drawing`;> ProStringToWstring( wmacro,"~ Command `ProCmdModelNew` ;~ Select `new`> `Type`1 `Drawing`;");>> //ProTKFprintf(fp,"status=%d\n",status);>> status = ProMacroLoad( wmacro );>> //status = ProMacroLoad( L"%@MAPKEY_LABELhn_ew" );>> //ProTKFprintf(fp,"ProMacroLoad:%d\n",status);>> status = ProMacroExecute();>> i am trying to run this mapkey on some ok return of some UI message dialog.>>>>
I have been looking for the same thing, best thing I have come up withis create a symbol, explode the draft entity and stretch as needed, Thenrelate the features with the view. One side thing is when you move thenote to the opposite side the raceway does not follow. I think PTC should have inspection notes just like inspection dimensions Rick LyBargerDesign Draftsman Husky Corp2535 Husky WayPacific, Mo636-825-7221RLyBarger@husky.com
Excuse all my previous typo's in 1st posting, but it was 3am & I was trying to get to bed quickly...ha..haSorry, L. Jett
Very nice summary.We tried the "mass_property_calculate automatic" and the "analysis feature" but found our regeneration times went up unacceptably on large assemblies.We also found that "&pro_mp_mass" in a note does not work reliably in some builds of WF2 (M130 for example will drop the "&" when the note is edited).So ... we use a "post regeneration" relation "est_mass=pro_mp_mass" and show "&est_mass". We have a special regeneration mapkey that regenerates the model, runs "Edit / Setup / Mass Props/ Generate report, etc" and then regenerates again to set the mass equation and also our center of gravity point. The mapkey is only run when the drawing is ready to be released or if the info is desired before that.Placing the relations in "post regeneration" does not help here (except is sort of hides them from the users) since the mass props have to be evaluated after regeneration and then the parameter (and CG point position) updated. If we did not use the CG point and the "
Hi davidGo to drawing display and then to component display where u can set theskeleton drawing to be shown on the screen.With RegardsT.MadhavaRao
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.