Recently active
I am using Creo View Release 11.0 and Datecode11.0.0.0Creo View Download not possible from Windchill, please check error below.Here are the errors that I facedAnfrage-ID: 4eij1q2i;mlwc1jgz;1100;kl3uni;3884278Anfragen-URI: /Windchill/wtcore/jsp/wvs/download/download_cvmcad.jspAbfragezeichenfolge:Statuscode: 404Nachricht: JSP file [/wtcore/jsp/wvs/download/download_cvmcad.jsp] not found
1. What product and version are you running? Creo View 12.1.0.0 2. What is the problem? When you move the mouse pointer over a component in Creo View, a tooltip is displayed.By default, this only contains the component name, but it's possible to customize the tooltips.Creo View also supports use on touchscreen devices.But on these devices there's no finger gesture to display the tooltips. Also see following Help Center links in this regards: About Customizing Tooltips Working with Touchscreens3. Are you using a workaround? If yes, please describe it. The possible workarounds are to connect a mouse to the touchscreen device or to switch to a normal PC with a monitor, mouse and keyboard.However, both workarounds are inconvenient if you've a touchscreen device as your primary device.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. We use tooltips very extensively f
When viewing the drawing in PTC Creo Parametric, the Origin Extension is displayed as a solid line. However, once the file is published and opened in PTC Creo View, the Origin Extension changes to a dotted line. in creo View In Creo parametric
When using Creo View (MCAD) if various faces of an object have been recolored using Home --> Appearance -> color palette, it it possible to save the recolored object to a PVZ file in such a way that the new color information is retained in the file and again displayed when the PVZ file is reopened?
Hello all,recently bought a Creo Illustrate license and in the PTC Portal we arranged the Licensing Host details (added the name of the notebook and MAC address)The problem i have is that i am unable to start Creo Illustrate, it seems i need a file before i can start the software. Did some checks in Copilot and it mentions i need a license.dat file which i can retrieve from the PTC portal.I am able to find an option called "Retrieve license file" but according to Copilot these are not the correct file which i need. However i am not able to find another option to find this elusive file 🙂 (or is Copilot just sending me to a totally wrong non existent solution?)Thnx in advance
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 12.12. What is the problem?Creo View 12.1 installation does not install the GDT ttf necessary to correcly see the symbols from DWG exported from Creo Parametric (that uses GDT as default for symbols).3. Are you using a workaround? If yes, please describe it.PTC suggested copying and installing a GDT font from a PC with a Autodesk installation, but that is not in line with the Autodesk EULA; the ttf must be installed not only copied, so the need to be included in the Creo View installation specifically.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.A user with Creo Parametric that export a DWG to another user that need to open that DWG with only Creo View installed for other manipulation, for company production internal workflows5. What impact does this problem currentl
Hi all, we want export the figures in svg- or png-files with a transparent background. This is important to implement the pictures in other programs (WWW, Photoshop, Word, ....) without the background of Illustrate. Please vote for this feature for future releases.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View Lite 12.1.0.02. What is the problem?Because of the use of inseparable models in Creo Elements Direct modeling the model structure in creo view is filled with many parts without WTPart number. If you are looking to the 3D it would be good to have the "select parent" command in the RMB. This way it would be possible to jump very fast to the parent.3. Are you using a workaround? If yes, please describe it.Scrolling up 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This would be used for example with chains. Some of these chains are designed with many chain links, so this way the structure sometimes has more than 100 links. It would be very handy to be able to jump very quickly to the parent and also collapse the parent again. Otherwise the structure browser is loaded
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 11.12. What is the problem?It is not possible to round parameters value used into the bom balloon (it is possible in drawing by using expression [.n] )3. Are you using a workaround? If yes, please describe it.Yes, i do not use parameters and I type values manually4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.i want to show only some digits of a real type parameter5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)If a parameter changes, i can forget to update the value I inserted manually in my figure
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We are using Creo Illustrate 10.2 and new 12.12. What is the problem?Other than expected (or wished) we misunderstood the What's new feature:"Support for Color Fills in 2D Figures"It is working well for new drawn 2D Geometry - as said ..."Ability to apply a color fill to ellipses, rectangles, and polylines".Sample for created fill areas:But the greatest benefit would be if existing complex Geometry from Source file could be filled, as well just designated areas to mark by the fill.Somehow ... the Fill finding something, but ...... not specific to the wanted fill... limited by not closed filled areas - looks like randomly found by closed 2D lines.very simple example where ellipse found but only partly filled 3. Are you using a workaround? If yes, please describe it.None4. What is the use case for your organization? Describe how your idea would work in context
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.02. What is the problem?Currently, Creo Explode Lines import as static Datum Curves rather than native objects. This lack of associativity forces manual rework as any change to the sBOM structure causes these curves to vanish, requiring illustrators to redraw every single path from scratch. We need the capability to convert Creo Parametric data into native Creo Illustrate objects that persist through sBOM or positional updates.3. Are you using a workaround? If yes, please describe it.No, I have already contacted PTC Support and no usefull workaround was provided. Currently, we have to redraw all the explode lines of our products after they are imported into Creo Illustrate.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We frequently restructure the sBOM to cre
Dear Community,Include which software and version you are using!Creo Illustrate 12.1 - in testing - Creo Illustrate 10.2 productivewe skipped Creo Illustrate 11.0 and 11.1 due to troubles with the Admin ToolExplain what you already tried.Comparing Opening / loading times Creo Illustrate 10.2 vs. 12.1 we discovered significant increase in timeCreo Illustrate 10.2 - loading appr. 2 MinutesCreo Illustrate 12.1 - Loading more than 7 MinutesInclude a screenshot (Trace file Comparism) If you check the trace files this section calling for a huge time in 12.1Info 15:45:10.319 20 Jan 2026 27668 6500 pvk PvPrefData User preferences saved Info 15:45:34.106 20 Jan 2026 27668 6500 Illustrate IllustrateApp Locked file C:/Users/lisher0/Downloads/XXXX.c3di successfully.10.2 (24 sec. for this step) Info 8:19:13.592 23 Jan 2026 8564 22992 pvk PvPrefData User preferences saved Info 8:25:19.
Hi all,can someone explain to me why an empty Creo Illustrate file is so large? I mean, I've always wondered why the files are so large. But I've only just noticed that even my empty CI files (i.e. without a pvz file) are 83 MB in size.That's about the same size as my own ‘standard’ file (that has 83MB) . But of course, my entire symbol library is included in that standard.But it wouldn't make any sense to store the entire symbol library in every CI file!?Does anyone know what's going on here? Best regards,Ramon Bohne(Siemens-Energy)
Hi all,I have a completely new problem with 3D and 2D symbols.This problem appeared suddenly. I never had this problem before. And after I had this problem, it also appeared for a colleague. That's why I decided to ask for advice here in the forum.What is the problem?Suddenly, I can no longer insert symbols. And symbols that I was able to insert before are suddenly no longer visible. Please watch the added video. Perhaps one of you has a good explanation and solution. Otherwise, I will have to contact support ... again. Best regardsRamon bohne(Siemens Energy)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Schematic 9.0.0.02. What is the problem?Creo Schametic, there is no option to create a Table, find attached image.3. Are you using a workaround? If yes, please describe it.An alternative method is to make a table in Creo, save it as a DWG file, and then import the DWG file into the Creo schematic.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our organization, every schematic drawing's 2D component information will be published as a table in Schematic Drawing.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.) 1. Make a schematic drawing that includes a table. To do this, we must import and create a table in Creo.2. In the event that the table needs to be revised, we must import the DWG f
I am switching from IDF to IDX soon and I don't understand the process of uploading files to Windchill after small electrical components have been added to the board from the ECAD side. On a large board, there are bound to be several small components that are added during the ECAD Validation process. They are valuable to see in the mechanical 3D model because they help with interference checks, but they slow down assembly performance drastically. Once I accept the components to be added to my assembly, is there a way that I can easily suppress them all so that I don't slow down my computer? Secondly, when I check-in the assembly to Windchill, it tries to check-in the small components as separate parts. Can I stop them from coming in as individual parts? If not, then how can I rename them before exporting them so that we don't run into issues with trying to check-in electrical components with the same name all the time?
Include which software and version you are using!Creo Illustrate 12.1, but any other version missing it tooExplain what you already tried.I miss some of the CGM export profiles, compared to ISO DRAWDoes anybody else having same demand for e.g. S1000D in Creo IllustrateInclude a screenshot Compare Iso Draw 7.4 vs. Creo Illustrate 12.1 Help centerAll not marked missing, especially the S1000D is my demand
I am using Creo Schematics Release 12.0 and Datecode 12.0.0.0When selecting a component on the schematic, previously (in v9.0) the parameter panel would update to show which component was selected, with version 12 however I have to close the parameter panel and reopen it to show which component I have selected to edit its parameters. What's strange is that another users computer does not have this issue with both mine and his installation being brand new.I have already reinstalled 3 times to see if it would fix the issue but it has come back each time, I have also cleared any settings I changed and keyboard shortcuts etc to no avail.There are no error messages in the console.
It seems a little thing but the ability to complete sketch entitiies and return to the select tool, to complete features, to activate the OK button on most pop up windows, etc. all using the middle mouse button is a massive advantage in efficient workflow and productivity - use Solidworks for a bit and you notice the increased mouse travel. Completing a sketch though is a significant ommision from the list - you still have to directly pick the pick the green tick. If the middle mouse button also completed a sketch this would complete the set beautifully!
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View ECAD Validate 12.1 2. What is the problem?Cross-Selection FROM Creo is not possible3. Are you using a workaround? If yes, please describe it.Only selecting from the ECAD Validate tool4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Mechanical Engineers are used to working in the graphics window and the model tree. Selection of components from there is natural and would be ideal. They understand what these components are from within Creo. Seeing a list of reference designators doesn't help them investigate the changes easily. Selecting from the model tree and then having it cross-select in Creo View ECAD Validate is the logical workflow for them.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View ECAD Validate 12.1 2. What is the problem?While working in ECAD Validate, some warning occurs and the message window pops up with pages and pages of logs and warnings. This is very confusing why one issue shows so many messages.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The use case is where the message window pops up, as needed, when warnings or errors occur. In general - if an error or warning is generated, the message window should popup. Any general information should not. For instance, if the initial compare had warnings, then the message window should be shown automatically. It shouldn't wait for a follow-up warning. When previewing items without any new warnings, the message window should NOT popup,
1. What product and version are you running?Creo Elements Direct Drafting 20.6 and 20.82. What is the problem?It is not possible to set the compression for TIF (TIFF) files to CCITT Gruppe 43. Are you using a workaround? If yes, please describe it.Yes - third party application4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Since we use TIFF for long-term archiving, file size must be minimized. CCITT Group 4 is generally considered an excellent standard for TIFF compression.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Unnecessary storage space of millions of files
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View Lite 9.1.0.02. What is the problem?When a user enters an incorrect password, Creo View abruptly exits with no indication of what went wrong. Users then assume Creo View just doesn't work on their computer and give up trying to use it.3. Are you using a workaround? If yes, please describe it.no4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.My idea is that Creo View would tell users when they enter incorrect credentials. Users can then try again or request a password reset from the admin.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Many users are giving up on Creo View and instead asking other employees to do things like print out drawings for them. I have no estimate o
Hello, we would appreciate a new option how to get rid of annoying prompt and "always open new session" or "always add to current session". Our users are tired to pick one of it. Prompt can stay there optional for people who likes clicking everytime...
Background: In our company we use CreoView as our main engineering 3D viewer, used by very many different functions. This tool is used by all our engineers when viewing and analyzing product data models (thousands of users). In CreoView our engineers generate value added data by creating annotation-sets, views, coloring, positioning of parts, etc. A very typical use is to subdivide the large product model into views for the steps to perform in various operations (Operations/Aftermarket etc.) and the Engineers position data and assign colors to highlight actions to use in the next step of the process. An important aspect here is the ability to filter and subdivide/group the model using metadata (function group etc.) That works well in CreoView MCAD but not in Creo Illustrate, especially not in the EBOM. We are now moving hundreds of users from another tool with these capabilities into CreoView and Creo Illustrate. We would like to have a workflow where the en
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.