Recently active
I think many of those who used (or are using) version 19.0 of Drafting, have experienced the faulty operation of colour flags associated with text and line in dimensions editing window.You edit a dimension to check its features, close the window even without changing settings by pressing OK, line and text have now the same colour!Every time you have to uncheck the flags to avoid troubles.I wrote some code to manage this behaviour. The macro has obviously taken over the button of the original one.Should be of some use for anyone, the lines are posted below.The macro saves the current features of dimensions, selects those to be managed (both single click or window), gets line and text colours, open dimensions management. On closing, checks whether line and text colours are the same* (which is the result we don't want): in this case, restores the previous ones. Finally restores the initial status of dimensions environment.1- As far as you don't need to change colours (which is for us the
Hello,let's finish it up!Sketches forms have been created containing tagged elements; these are used for setting print viewports and file names.This macro first checks that all texts tagged as file names with the INFO 'NOMEFILE' are different to avoid overwriting; then requests to select (by clicking on previously created blue frames) the sketches to be printed, writes needed information in a LTAB; takes note of the current printer settings;provides for new settings; prints all requested areas to given path and file names; resets printer settings.Let's see details of the code with usual bold comments.DEFINE STAMPASCHEMINOLOCAL CORNICE LOCAL XCORNICE LOCAL YCORNICE LOCAL XCONFRONTO LOCAL YCONFRONTOLOCAL CONTATORETAB LOCAL CONTATORETAB2 LOCAL CONTATORETAB3LOCAL OLDPRINTER LOCAL OLDPLOTSCALE LOCAL OLDORIENTATIONLOCAL DESTINAZIONE LOCAL NOMEFILEPDF LOCAL NOMEFILEMODLOCAL X1 LOCAL Y1 LOCAL X2 LOCAL Y2LOCAL ORIZ LOCAL VERTLOCAL CHECKNOMI LOCAL NUMELEM LOCAL CONTATORENOMI LOCAL CONTATORENOMI1
PTC University Precision LMS 9.2 was released on June 10th, 2017.This release includes several important new features. See a demo of these features on Learning Connector.What’s new in PTC University Precision LMS 9.2:Simplified subscription license administrationSubscription License Usage reportShare standard eLearning licenses to your supply chainIf you have any questions or feedback about this release, please don’t hesitate to comment below or email PTC University Support.
Hello!Here follows the second step.The code checks needed information, sets references of the form to be drawn, writes identification INFOS and draws.DEFINE CREASCHEMINOLOCAL SOMMALOCAL CTLCOMPLETEZZALOCAL IDLISTA LOCAL POSLISTALOCAL NOMESCHEMINO LOCAL NOMEPARTELOCAL SLASHPOS1LOCAL FORMX LOCAL FORMYLOCAL PUNTOXY LOCAL PUNTO1 LOCAL PUNTO2LOCAL PUNTO1A LOCAL PUNTO2A LOCAL PUNTO3A LOCAL PUNTO4A LOCAL PUNTO5A LOCAL PUNTO6A LOCAL PUNTO7A LOCAL PUNTO8ALOCAL PUNTO5B LOCAL PUNTO6BLOCAL RIFLOGO LOCAL RIFINTESTAZIONE LOCAL RIFFILENAMELOCAL IDPARTELOCAL INTESTAZIONELOCAL DATALOCAL PUNTOINSERIMENTOLET SOMMA 0LET PUNTO5B 0LET IDLISTA ("") LET POSLISTA ("")Checks if data are filled in (DS is an abbreviation macro for "DISPLAY") and, in case, asks forLET CTLCOMPLETEZZA 0{***** VERIFICA INSERIMENTO DATI E STABILISCE RIFERIMENTI FORM SECONDO IL FORMATO SCELTO *****}INQ_TOOLBAR_ITEM 'com_lists'IF ((INQ 15) = 0) DS ('Seleziona una lista')ELSE LET IDLISTA (NUMEROCOMMESS
Hy,here follows some code.Well, it's quickly written and without confrontation with other people, therefore it is surely amendable... But it works fine and that's the target!This is the macro which manages the creation of the toolbar, variables and messages are italian imprinted, since I was not thinking of possible publication. Bold text are comments.DEFINE TBSCHEMINILOCAL CTLERRORELOCAL CONTATORE1 LOCAL LISTELOCAL SLASHPOSLOCAL VERCOMMESSA{***** CREAZIONE TOOLBAR *****}The change from one job working directory to another is managed by a macro that also provides the restarting of the toolbar, destroying it if already created, to reflect the content of the new pathTRAP_ERRORTOOLBAR_ITEM 'txt_form' DESTROY CONFIRMTOOLBAR_ITEM 'rab_form' DESTROY CONFIRMTOOLBAR_ITEM 'txt_orientation' DESTROY CONFIRMTOOLBAR_ITEM 'rab_orientation' DESTROY CONFIRMTOOLBAR_ITEM 'txt_list' DESTROY CONFIRMTOOLBAR_ITEM 'com_lists' DESTROY CONFIRMTOOLBAR_ITEM 'txt_pos' DESTROY CONFIRMTOOLBAR_ITEM 'com_pos' DESTROY
Let's make a summary.I need to automatically draw standard forms linked to individual positions in a specified Bill Of Materials.The automatism allows easy traceability of form features (dimensions, position), headings filling in, assignment of file name.The variables involved are not so many: the choice is between A4 and A3 format, portrait or landscape orientation; linked Bill Of Materials and reference position(s).I decided upon a non-permanent toolbar: its creation is managed directly by the macro and this is its appearance:The toolbar caption reflects the current directory (Job number);available BOM (xls format) are read and loaded into the combo_list item.The "Positions" combo_edit item is freely editable.With the current selection, the OK button produces the sketch belowThe fundamental elements in it are the blue frame and the yellow text at the right bottom corner.The first is made recognizable by making it a POLYELEMENT; the text has been given the info 'FILENAME'.When the but
Hy everyone who may happen to read these lines,I was posting details of this activity as an idea, but I decided that, since I already realized it, I had to choose some other way for publishing it for whoever could be interested. So here's my first blog post.Our widely self tailored PDM system requires our department to produce sketches of parts to be machined by our suppliers.These sketches are usually grouped into a single .mi file. Upon creation, or at any revision stage, involved sketches must be saved into .pdf format whit a specified name architecture and path.Up till now, it meant (we are talking about 10 to 20 sketches at a time multiplied by 1 to n projects each job) the draftman had to launch a number of printing sessions, manually indicating from time to time print areas and file names.The idea is a tool capable of laying down standard formats drawn in a way that makes them recognizable to the software, give them the information needed to store them correctly, allow an easy m
Attached my latest 2017 SAXSIM presentation about linear dynamic system analysis with Creo Simulate (unshortened full version). The presentation gives a comprehensive insight into dynamic analysis capabilities with this code and should help experienced Simulate users with theoretic knowledge in dynamic analysis to familiarize themselves with this topic. For quotation purposes, it should be available for download on the qucosa server in a couple of weeks, too (see www.saxsim.de).I also added a chapter with enhancement requests for dynamic analysis and a list of known code issues (SPR) from own project experience with possible workarounds, if existing. I’d appreciate if other users doing dynamic analysis may comment this to see if this matches their experience, and if they have additional wishes or remarks.Here the topics of the presentation:Introduction to dynamic analysis theory in Creo SimulateModal analysis (standard and with prestress)Dynamic analysis, including analysis classificat
It tooks long time, but the problem was solved. Problem: Some drawing symbol is related to view, but icon Unrelate is grayed out or missing in pop-up menu. Source of problem:Symbol is placed on any snap line. This situation is signalyzed by "square with filled dot" in symbol placement point. A) Symbol 3,2 is freeB) Symbol 1,6 is placed on snapline. How to unrelate drawing symbol:1. move a symbol out of snap line2. pick desired symbol3. icon unrelate is functional now AND pop-up menu includes Unrelate too This "problem" was going to make me crazy for a long time. Now l´m happy from this solution and share it with PTC communityBest regardsMilan Bonka
Preeti Gupta, ArrowP Inc will help guide the PTC/USER Community on how to maximize its use and get started on developing "killer" apps. Register now for today's presentation (20 Apr 2017) at 11:00 AM EST. Registration details below-https://attendee.gotowebinar.com/register/6905736047825040131
When you are using a WTUser as a workflow variable, you might have noticed that Windchill displays all users in the system. I personally find the Setup Participants and Resource Pools a bit much for simple tasks. I want to give a user, say and administrator or manager, a task to delegate future tasks to another user. I create a variable of type WTUser. The user who gets this task will see a drop down list of users, all users in the entire system. Now, if you have a moderate size system of a few hundred users, this will be a very long list. Plus, not all the users will have the necessary rights to complete future workflow tasks. You want to limit this drop down list.This is done via a data utility and a custom JSP task template page. I have create a framework to write your own. In one example, a user might want to limit the list to members of the Product or Library.So, you get a drop down list like this:Sorting and default user selection also po
It’s that time of year again when we come together on a global scale in celebration of a smart, connected world: April 9th is World IoT Day! In recognition of this international event, we are offering you the opportunity to ThingWorx certify at a 50% discounted rate off any ThingWorx exam.*Register to complete the ThingWorx Developer Associate exam for $199 USD using the following coupon code: IoT Day AssociateProfessional Level Exam Already a certified ThingWorx Developer Associate? It’s time to get professional.* Register to complete the **ThingWorx Device Integration Professional level exam for $299 USD using the following coupon code: IoT Day Professional**You must be a certified ThingWorx Developer Associate to complete this exam. *April 30th is the last day to register for any exams using either coupon code. All exams must be completed by May 15th, 2017. Exams may not be rescheduled after this date. Last year ThingWorx developers around the world celebrated IoT Day by
Attached a presentation about how to minimize stresses at a notch with help of a catenary curve. I did this presentation at the SAXSIM 2015 (www.saxsim.de). It is thought as addition to the presentation about notch stress minimization from Isabelle Ciomber and me, posted in this blog, too.Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172192.An interesting work from Wiegand Rathmann how the catenary curve was transferred with help of Mathcad into the necessary parametric representation is this: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172556http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172556 (unfortunately in German language only)Here the summary:The presentation describes how to reduce the stress concentration factor at cross section transitions to nearly 1 by using a catenary curve as notch geometry (catenary fillet). With help of global sensitivity studies performed in the p-FEM-code Creo Simulate, a normalized stress concentration facto
Attached a presentation about Shock spectra analysis in Creo Elements / Pro Mechanica, unfortunately in German language only. Hope it may be useful eventhough. I did this presentation at the SAXSIM 2011 (www.saxsim.de), to that time as PTC employee at Global Services in Germany. Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-68407 Here the summary: The presentation explains idea and fundamentals of shock response spectra analysis. With help of the PTC FEM-software Creo Elements / Pro Mechanica the shock response spectra (SRS) for an exemplary half sine shock is calculated. The shock response of a one-mass and a two-mass oscillator are analyzed per dynamic time as well as per dynamic shock analysis. The modal superposition methods "absolute sum" and "SRSS" (Square Root of the Sum of the Squares) are explained. The method is applied for different half sine shocks on a realistic example: A thermal imaging system of the company
Steven LaPha from NASA is speaking about Bringing Large Assemblies Down to Size.. Don't miss! Register here.Topic: Bringing Large Assemblies Down to SizeWhen: 29 March 2017, 11:00 AM ESTWho: Steven LaPha NASA KSC – ESCAbout the WebinarSpace is a big place. When designing for space everything is big, complex, and it really is rocket science. The models used are large and can be detailed down to every bolt, requiring a lot of computer horsepower to keep up. This webinar will delve into some best practices NASA KSC – ESC has developed to improve performance when working with these large PTC Creo Parametric models. The webinar will also cover many of the bad practices that make large models difficult to work with and why. Whether attendees are starting from scratch or working with fully developed models, there will be something to take away from this webinar. About StevenSteven maintains Creo CAD system deployment and Windchill business administration for NASA Engineering at Kennedy
Did you miss the recent PTC/USER Expert Speaker Series Webinar? Lewis Lawrence and Bill Friend discussed about Creo automation for a global implementation. You can access the presentation here.Play recording (1 hr)
Hey baby, I hear the blues a-callin', Tossed salad and scrambled eggs Oh My Mercy (alt: Quite stylish.) And maybe I seem a bit confused, Yeah maybe, but I got you pegged! Ha, Ha, Ha, Ha! But I don't know what to do with those tossed salads and scrambled eggs. They're callin' again. (The following are alternate endings) They're callin' again. Good night, Seattle, we love you. What is a boy to do. Good night. Frasier has left the building. Thank You! Scambled eggs all over my face. What is a boy to do. Goodnight, everybody. See you next year, we love ya.
Attached a presentation about the new finite friction contact model introduced in Creo Simulate 3.0. Full title is: The New Contact with Finite Friction Feature in Creo Simulate 3.0- Theory and Application- Comparison with the Friction-Free and Infinite Friction Contact ModelsI just did this presentation at the SAXSIM 2016 (see www.saxsim.de). It should be a valuable update of my old presentation from 2009 about the infinite friction contact model introduced in Mechanica Wildfire 4, also published in this blog. The official link for quotation from the qucosa server: http://www.qucosa.de/recherche/frontdoor/?tx_slubopus4frontend[id]=20681Summary:The presentation describes the underlying theory and software functionality of the finite friction contact model introduced with PTC Creo Simulate 3.0. It is being compared with the friction-free and infinite friction contact model used exclusively until Creo Simulate 2.0. It is being tried to demonstrate the mode of operation of th
Well, if you have not met him before, you are invited to the party tomorrow (9 March 2017). Bill and Lewis from Weatherford are going to speak about "Creo Automation for a Global Implementation". Below are the details -Where: Online WebinarWhen: Thursday - 9th March 2017, 11:00 - 12:00 ESTAbout Bill FriendOriginally from Racine, Wisconsin where he spent approximately 13-Years designing automated machines, robotic work cells, gages, dies and custom tooling primarily for the Automotive and Aerospace Industries. In December of 2007 he relocated to Houston, Texas and began his career with Weatherford in the Oil & Gas Industry as a Product Designer for the Thru-Tubing R&D product lines. In April of 2013 he decided to switch over to IT and joined Weatherford’s Global Windchill & CAD Support team as a Business Analyst/System Administrator. In 2015 He became the primary CAD Administrator at Weatherford and became responsible for all
Your new ribbon, Quick Access toolbar, and Graphics toolbar settings in Creo Parametric 2.0 can be exported to a *.ui file. These *.ui files are read by Creo Parametric in the following order:1. <loadpoint>\text\creo_parametric_admin_customization.ui2. <user_profile>\AppData\..\creo_parametric_customization.ui (this is the system default location)3. <working_dir>\creo_parametric_customization.ui (set config.pro option load_ui_customization_run_dir to yes) Note: You can always restore the default Creo Parametric settings.
PTC/USER Expert Speaker Series Webinar - Creo Automation for a Global Implementation - Lewis Lawrence - WeatherfordThursday 2017-03-09 11:00 – 12:00 (EST)The Board of Directors of PTC/USER, in partnership with Punditas, would like to personally invite you to the first PTC/USER Expert Speaker Series Webinar. We are honored to have Lewis Lawrence from Weatherford, who has won a number of Best User Presentations at LiveWorx over the years, be our opening speaker. His presentation, Creo Automation for a Global Implementation, will be an opportunity for him to share his experiences with our global community.The WebEx invitation is below. As the audience will be on mute, we strongly encourage you to connect using VoIP (your computer speakers) to keep our costs manageable. Please ask your questions via the chat function in WebEx. Lewis will address your questions at the end of the presentation.We look forward to an exciting launch of the PTC/USER Expert Speaker S
On Wednesday, February 8, 2017, at the PTC/USER Technical Community Open Forum Winter Event General Session in Boston, we announced the “PTC/USER Enhanced Value” initiative. It is a well-thought out and developed plan to take PTC/USER’s “Educate, Advocate and Support” model to the next generation of PTC/USER members. As part of the presentation, we officially announced a close and mutual partnership with Punditas (www.punditas.com). Sharing a mutual vision, we together will move boldly into our 27th year and beyond. About PTC/USER PTC/USER is the independent voice for users of software produced by PTC. As the sole entity recognized by PTC as the official worldwide representative of its customers, it is uniquely positioned to support customers through a dedicated user network; educate customers through an online file library, online discussion forums and contributions to PTC events; and advocate on the behalf of customers through an annual meeting with PTC and Te
Earlier this month (Feb 7- 9) a number of PTC users, customers and partners gathered in Boston at the historic Boston Park Plaza to share their successes and challenges in using PTC products. Here’s who attended -Number of attendees: 195Number of companies represented: 106Industries represented: 20PTC employees participated: 25International attendees: 33Existing Technical committee members: 135 Take a look at what else happened here- PTC/USER Portal : Blogs : Were you one of the 195+ that came to Boston? Then, you missed it! The blizzard, Snow, Patrio…
Dear All; I am new to the Mathcad.These days I browsed the PTC community, cannot find much related with Oil & Gas Industry Metering section.I faced the problem as per attachment.I know Mathcad powerful in the Units, but for my area - Oil & Gas Metering section, I found very limited in Mathcad.I tried to generate AGA3 calculation with units, seems cannot go through.So I have to create AGA3 without units, but also I encountered the problem.Very appreciated if you could advise me how to fix the problem.FuZhong
Hello All, and those who I relied on in the past,I had been studying on some areas of renewable energy (wind, solar, biogas, geothermal), some other areas such as engineering energy management, and some more areas. all this to gear-up for my graduate studies in renewable energy at a local university in New Zealand.I had been a little busy. Plus read up on Thyristors in Power Electronics and did some examples in Prime.Oh I forgot to mention. I passed a 4 part course in Construction Management through Coursera the provider. The course was created by none other than Columbia University in New York City. I had to finish it fast because my semester is starting next Monday. I will post the certificate so those interested may like to take-up the course-workshop. I recommend it to any one interested construction on large projects as well as small. I will be picking up on where I left on my backup computer having problems re-loading Prime 2.0. I will visit the old comments and follow thru.Cheer
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.