Recently active
Testing idea merger
I have the same idea
The tool's current overview page only offers a filter for the "Product Area" category. See picture 1.This is further complicated by the fact that when comparing products across multiple versions, for example Creo Parametric 8 versus version 12, the new features are listed on multiple pages, this making it difficult to get an overview. Suggested improvement:Overview on one page (no need to change pages)Extended filtering options, not just by product area (see picture 2)Content is always listed in all subversions, even though it was actually only introduced in one subversion. See picture 1. It would be better to list the content only once. This makes the table more manageable.
when opening a new support case the input for field "Description" is limited to 1200 characters, the number of remaining characters is displayed below the field, input is prevented when exceeding 1200 characters. Each entered character decreases the count by 1, but entering a "newline" decreases the number of remaining characters by 6 and entering anything else than ASCII characters decreases the count by 2 (or more). This behaviour can eat up the remaining characters quickly when writing a more extensive explanation (e.g. to provide details necessary for understanding the case) or when using non-ASCII characters. Suggest to check the scripts involved in calculating the "remaining character count" and adapt them to count "newline" and non-ASCII characters as 1 occurrence only.
When running the Enhanced Completeness Check, I continually get a Warning message about "unusual file extension" because I'm referencing Ai graphics in my DITA files. Given that Ai files are now supported, can you disable this Warning?
By default only cases from the last 6 months are shown in the default view. It would make sense to also show older cases where cummunication took place recently - because thei are actively worked on at the moment.
At the moment, a maximum of 255 characters can be entered in the Justification text field.This has not been enough for me several times and I have had to add the justification as a separate comment after the escalation.Please increase the maximum number of characters to a much higher value. E.g. to 3900, as is the case with the comments.
When gathering data to display to the user, not every field I gather is guaranteed to be filled out and if it is not filled out I am wanting the field label to be displayed with no value next to it. However the Property Display Widget will not display these fields and even when I set a default value within the info table it still won't display them? I checked and the info table is populating as expected, how can I fix this problem? I don't want to use Dynamic Property Display because it isn't letting me customize the column display and what is returned is already known.
The KB search automatically provides suggestions while entering characters. This is fine, except it treats the 'enter' key as though the mouse was pressed and whatever it happens to be hovering over is selected instead of the search term that was entered. Please do not treat a mouse click as equivalent with pressing the 'enter' key. Here is a demonstration. I'm attempting to search for what is entered in the search box, not whatever my mouse happens to be hovering over from the suggestion list. (function() { var wrapper = document.getElementById('lia-vid-6345077155112w976h442r130'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(
Enhancement for WRR.Version below: 11.1, CPS05See screen snip with notes.Easy work around by labeling the Configuration Identifiers with preceding number or letters, but the function should be common to other expandable selection windows.
Is there an API to programmatically retrieve Part Instance structure by oid? For example oid=OR:wt.part.WTProductInstance2:XXXXXXXX
The Problem:If I am looking for a solution to a problem in the PTC Support area (https://www.ptc.com/en/support/), I am not presented with any search results from the "Creo Parametric Ideas" area of the Community. I assume this is true for any of the "Ideas" sections.Benefit of including results from "Creo Parametric Ideas":If the solution I need doesn't exist, it would be helpful to know that by finding an Ideas post that is asking for it, and to see the status, and to engage in the conversation and help vote it up. Additional Benefit:The Creo Parametric Ideas part of this community is not the most advertised and well know area, especially to newcomers. This is perpetuated because it is shielded from the search results returned from the support site. If results from here were included, there would be more activity here. More people would find Ideas and vote them up. PTC would get more feedback from a larger cross-section of Creo users. Implementation:It could just be in
Please stop scaling certain pieces of text on the eSupport site as the browser gets wider. Increasing the width of a browser window just a couple of pixels will suddenly make a bunch of the text change size. I would prefer that nothing changed size, but if you need to scale for some other reason, then please scale everything, not just pieces of the interface. See attached images and video. Thanks. Normal Size: Scaled Up Text: Video Demo: (view in My Videos)
You can only Export PDF Format from inside the Product Release Calendar Release Matrix Page. Since The Matrix is in table format, it would be great to also enable Export to Excel. Example: Windchill PLM 13.0.0.1 Release Matrix
Please add links to the Creo+ and Windchill+ documentation to the PTC Help Center pages. PTC Help Centerhttps://www.ptc.com/en/support/help PTC Help Center - Creohttps://www.ptc.com/en/support/help/Creo PTC Help Center - Windchillhttps://www.ptc.com/en/support/help/Windchill Creo+ Documentation - Please add to help centerhttps://support.ptc.com/help/creo/creo_plus/usascii/index.html Windchill+ Documentation - Please add to help center????
Not sure if it's just me, but when managing the users for my company is always difficult. I don't see any way to easily deactivate users. You can remove their access but they just sort of stick around unless you submit a ticket to get them disabled. Also editing users sort of act like you're that user and have seen it get confused with my information versus the user I'm editing's information. I'm also not able to update someone's account to add our customer number if they managed to create an account without one. I think we should have that ability if we recognize the person has a basic account and they should have a corporate account. The whole UI/workflow could use a revamp and updated to more practical methods to support corporate administration of users. It would also be beneficial if PTC Support and Precision LMS accounts could be managed from one place, not in two semi-connected databases. I can see cases where you may not want to give training or support to specific indiv
The current method of generating a home use license for a user is:Have the user collect the MAC address from the home computerUse the License Management tool to generate a license with that MAC address as host.Forward the generated license to the userI'd like to see it changed so as an administrator I can simply check a box on the user's account granting access to home use for selected products or subscriptions. They would then be able to log in from home and click a button to retrieve the license file. This should also function to refresh the license after it expires due to annual renewal. Needless to say this MUST come with a reporting capability to see (and change) who has access, who has generated a license, for what products, when they expire, and how many are available.
Good morning, it would be useful to have the background with the gradient also in the drawing phase. Translated by the Community Moderation using Google Translate ----------------------------------------------------------------------------------------------- Buon giorno sarebbe utile avere anche in fase di disegno lo sfondo con il gradiente.
I ask for a Possibility to get a List of known (and not resolved) Issues per Tool Release (for eg. MATHCAD or RV&S) per released Version? (Improvement for Search of Articles)Inside of Release Notes some Error entries exist,but over the time they are partly resolved with a CPS (thus no longer relevant),and especially many Findings will come AFTER the Tool Version has been released and thus won't be shown in any Documentation. An Improvement of Search would be extremely helpful, showing all Findings/Issues/Errors valid for a certain Tool Release, not fixed for that Release.
PTC HelpTo Add a New Cascade1.In the Options dialog box, under Customize, click Quick Access Toolbar to open the customization page.2.Click New Cascade. A new cascade is added below the selected group.3.Click Rename and specify a name for the new cascade.4.Right-click the new cascade and click one of the following to set the behavior:◦Display Menu — Labels only.◦Display First Command — The icon of the first command irrespective of the last selected command.◦Display Last Used Command — The icon of the last selected command. Idea: When selecting the Display First or Display Last setting I would like to have the Label also change. Today it retains the Cascade Menu Name and will just change the Icon. Why, Why, WHYYYYYY
Or at least turn off the audio so it isn't bonging all the time when navigating PTC.com web pages.
This idea is a PTC Support/Community idea With so many ideas being added to the community and voted on, it would be nice to see a summary of the ideas released by build. While a few I checked did show that PTC followed up and wrote back when they were implemented it would be nice to see a list. For example, which ideas were implemented into Creo 9.0. One intent is that it would show that PTC is implementing community ideas, even if an individual's ideas are never or rarely picked. It could also help show what people wanted to use that functionality for originally and what problem were they trying to solve. This summary (either in support or community post/report) could provide a better visibility of the loop being closed. It would also encourage others to keep providing ideas and voting other ideas reducing the question on if PTC ever implements ideas.
Please add the feedback widget to reference document web pages. Currently there is no way to easily provide any feedback on reference documents. This would be helpful. For example, the document below is supposed to lead to the Windchill 12.0.2.0 CAD Integrations Matrix but instead it leads to the 12.0.1.0 version with forward looking information about 12.0.2.0. That's not the same as the actual 12.0.2.0 version with the final, official compatibility. (This should definitely be available now that 12.0.2.0 has shipped.) Without the feedback widget there is no easy way to notify someone about this problem.
Please change the behavior of the "My Cases" widget and the "Case Tracker" page to display ALL cases by default, not just technical support cases. It is counterintuitive to use the "Cases Opened By <My Name>" or "Cases Opened By <My Company>" and not have ALL the cases be visible.A user shouldn't need to navigate to the Advanced tab of the Case Tracker page and then pick the other case types in order to find these cases. "All Case Types" should be the default behavior for all pages and widgets.
Similar to the following Idea, PTC customers have reported the need to have a tool on the PTC site that can list all product enhancements that have gone between 2 product versions. "What's New" documents might exist for new versions, which will list enhancements compared to the previous version, but as it is more and more common to skip version upgrades (due to upgrade cost), it would be beneficial to have a tool that can list all product enhancements that have gone between product version X.X and Y.Y Provide a Software Compatibility Adviser Tool on the PTC support website
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.