Recently active
Attached my latest 2017 SAXSIM presentation about linear dynamic system analysis with Creo Simulate (unshortened full version). The presentation gives a comprehensive insight into dynamic analysis capabilities with this code and should help experienced Simulate users with theoretic knowledge in dynamic analysis to familiarize themselves with this topic. For quotation purposes, it should be available for download on the qucosa server in a couple of weeks, too (see www.saxsim.de).I also added a chapter with enhancement requests for dynamic analysis and a list of known code issues (SPR) from own project experience with possible workarounds, if existing. I’d appreciate if other users doing dynamic analysis may comment this to see if this matches their experience, and if they have additional wishes or remarks.Here the topics of the presentation:Introduction to dynamic analysis theory in Creo SimulateModal analysis (standard and with prestress)Dynamic analysis, including analysis classificat
Attached a presentation about how to minimize stresses at a notch with help of a catenary curve. I did this presentation at the SAXSIM 2015 (www.saxsim.de). It is thought as addition to the presentation about notch stress minimization from Isabelle Ciomber and me, posted in this blog, too.Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172192.An interesting work from Wiegand Rathmann how the catenary curve was transferred with help of Mathcad into the necessary parametric representation is this: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172556http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-172556 (unfortunately in German language only)Here the summary:The presentation describes how to reduce the stress concentration factor at cross section transitions to nearly 1 by using a catenary curve as notch geometry (catenary fillet). With help of global sensitivity studies performed in the p-FEM-code Creo Simulate, a normalized stress concentration facto
Attached a presentation about Shock spectra analysis in Creo Elements / Pro Mechanica, unfortunately in German language only. Hope it may be useful eventhough. I did this presentation at the SAXSIM 2011 (www.saxsim.de), to that time as PTC employee at Global Services in Germany. Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-68407 Here the summary: The presentation explains idea and fundamentals of shock response spectra analysis. With help of the PTC FEM-software Creo Elements / Pro Mechanica the shock response spectra (SRS) for an exemplary half sine shock is calculated. The shock response of a one-mass and a two-mass oscillator are analyzed per dynamic time as well as per dynamic shock analysis. The modal superposition methods "absolute sum" and "SRSS" (Square Root of the Sum of the Squares) are explained. The method is applied for different half sine shocks on a realistic example: A thermal imaging system of the company
Attached a presentation about the new finite friction contact model introduced in Creo Simulate 3.0. Full title is: The New Contact with Finite Friction Feature in Creo Simulate 3.0- Theory and Application- Comparison with the Friction-Free and Infinite Friction Contact ModelsI just did this presentation at the SAXSIM 2016 (see www.saxsim.de). It should be a valuable update of my old presentation from 2009 about the infinite friction contact model introduced in Mechanica Wildfire 4, also published in this blog. The official link for quotation from the qucosa server: http://www.qucosa.de/recherche/frontdoor/?tx_slubopus4frontend[id]=20681Summary:The presentation describes the underlying theory and software functionality of the finite friction contact model introduced with PTC Creo Simulate 3.0. It is being compared with the friction-free and infinite friction contact model used exclusively until Creo Simulate 2.0. It is being tried to demonstrate the mode of operation of th
Attached a presentation about the infinite friction contact model introduced in Mechanica Wildfire 4. I did this presentation at the SAXSIM 2009 (see the archive of www.saxsim.de) as well as the 9th PTC Simulation users meeting. Official link for quotation of the German presentation version: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-200900787 The English version which was in parts translated later by Andy Deighton is also attached. Summary: The presentation describes the new contact model in Mechanica Wildfire 4 with infinite friction. The theory of friction-free contact as well as the infinite friction contact model is explained. The foundations of the Penalty- and Newton-Raphson methods used by the code are described. Two application examples are shown in so much detail that an experienced user should be able to reproduce them: A cylindrical roller bearing (Hertz contact) and a shaft-hub joint with interference (shrink) fit.
Attached a presentation about Hyperelasticity in Pro Mechanica. I did this presentation at the SAXSIM 2010 (www.saxsim.de) as well as the Planet PTC live in Stuttgart, to that time as PTC employee at Global Services in Germany. Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-62821 Here the summary: Part 1: Theoretic background information - Review of Hooke’s law for linear elastic materials - The strain energy density of linear elastic materials - Hyperelastic material - Material laws for hyperelastic materials - About selecting the material model and performing tests - Implementation of hyperelastic material laws in Mechanica - Defining hyperelastic material parameters in Mechanica - Test set-ups and specimen shapes of the supported material tests - The uniaxial compression test - Stress and strain definitions in the Mechanica LDA analysis Part 2: Application examples - A test specimen subjected to uniaxial loading - A volumetri
Attached a presentation about elasto-plasticity in Creo Simulate. I did this presentation at the SAXSIM 2012 (www.saxsim.de), to that time as PTC employee at Global Services in Germany.Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-87141Here the summary:This presentation describes the basics of elasto-plasticity and its application with the finite element software Creo Simulate (formerly Pro/MECHANICA) from PTC. The first part describes the characteristics of plastic behavior, different plastic material laws, yield criteria for multiaxial stress states and different hardening models. In the second part, the opportunities and limitations of analyzing elasto-plastic problems with the FEM-code are described and user information is provided. The last part finally presents different examples. Deeply treated is the behavior of a uniaxial tensile test specimen before and after elongation with necking appears.
Attached a presentation about how impact events can be analyzed with Creo Simulate and Abaqus/Explicit. I did this presentation at the SAXSIM 2015 (www.saxsim.de).Official link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-171812.Here the summary:The presentation describes how to analyze the impact of an idealized fragment into a steel protective panel with different dynamic analysis methods. Two different commercial Finite Element codes are used for this:a) Creo Simulate: This code uses the method of modal superposition for analyzing the dynamic response of linear dynamic systems. Therefore, only modal damping and no contact can be used. The unknown force-vs.-time curve of the impact event cannot be computed, but must be assumed and applied as external force to the steel protective panel. As more dynamic the impact, as sooner the range of validity of the underlying linear model is left.b) Abaqus/Explicit: This code uses a direct integration method for an incr
Attached a presentation showing how to design and analyze stress minimizing notch shapes (official SAXSIM presentation of 2014, see www.saxsim.de). Link for quotation: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-141533. Circular (one-radius) fillets are known as state-of-the-art for reducing notch stresses at cross section transitions. The stress concentration factor Kt of such geometries can be read out from diagrams/tables given in the literature. However, the efficiency of stress reduction of circular notches is very limited. The goal of the work therefor is to present a method for the designer/analyst how to design non-circular notches/fillets just by using suitable Kt-diagrams without time-consuming and expensive FEM analyses. Kt-numbers of nearly one are possible, that means in the "notch" just the nominal stress appears and no stress concentration takes place.The presentation has two parts: Part one describes the working methods and software functions as well
Analysis and Simulation Attached a presentation I did at the SAXSIM (SAXon SImulation Meeting), Technical University Chemnitz , Germany in 2013. An official version can be downloaded from the archive at www.saxsim.de. For quotation purposes, you should use this URL: http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-114533.This presentation shows the foundations of bolt analysis according to the VDI-guideline 2230 part 1 (VDI=Verein Deutscher Ingenieure, German engineers association). In addition, the four FEM model classes proposed in VDI 2230 part 2 (draft) are described, as well as the features available in Creo Simulate to realize these model classes. Next, the presentation shows the requirements for linearizing bolted connections, and why in a FEM analysis with a linearized connection no preload is necessary.The new fastener feature introduced in Creo Simulate is explained in detail. This feature allows the automated modeling and analysis of bolted connections having standard
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.