Recently active
I have been working on this since last week and almost completed my work and then tried to save file at the end of day and seems didn't save properly and the contents of the file were missing. There's no recovery file. I just dont know what to do. I would really appreciate if anyone can help me with this. Thanks
@Jaime_Lee, please resolve annoying "thing" shown on picture. https://community.ptc.com/t5/Creo-Modeling-Questions/Creo-3-0-not-starting-after-adding-custom-starttools/m-p/485868#M112644 My picture belongs to IE11. I guess that the problem is reproducible in FF and Chrome, too.
Carriage returns do not work in rich text mode, and when the user tries to switch to HTML to create breaks, all content that has been typed is deleted. Please add carriage return functionality and save content when switching modes.
Hi,before the reorganisation here there was a very helpfull windchill reporting resource page located here.Resource for reporting - PTC CommunityThis seems now to be located here:https://community.ptc.com/t5/Reporting/Resource-for-reporting/gpm-p/448738but with restricted access.How can I get access again?
With the change over to Module Works and the loss of Vericut, no longer does the material removal simulation open in a second window allowing the simulation to run while still working in a ProE/Creo session. Our output has been drastically reduced as some of our simulations take several hours to complete. A support case was opened to determine if this was somehow even possible. Support stated this is not possible and to submit a product idea to see if the community thought it was valuable enough. The idea is to allow a simultaneous or concurrent session of Creo so design can continue while Moduleworks is running the simulation in a seperate process. Hopefully this is something that others could benefit from as well so vote early and often.
General concern about the forums In my opinion, things are going south with the forums. People are not posting in the correct forums People are using the blog as a forum If I report these issues, no response from PTC The level of PTC involvement is at an all time low The way the forums/blogs/etc. are arranged is still a mess It's time to step up our game!
@Tmetcalf, is it possible to merge two current Creo areas (Creo Modeling Questions, Additional Creo Questions) into one named Creo Questions ? It does not make any sense to have two areas.
Ok, so, I haven't been on here in a long time, as I'd been out of work for another 7 months, unfortunately. But, I finally found another job, for hopefully at least the 6 months they told me. So, where the @$%&*!! are the photo albums??? I can't imagine that they actually deleted a very useful feature from the site. Anyone? Thanks! Frank
The Browse menu has too many items, spills over. Last entry I can read is multi-user creo schematics. Everything below is not visible. I'm using firefox.
Hello All, I have a highly configurable model that I want to export into a drawing and I need that drawing to scale according to the overall size of the configured model. Is there anyway this would be possible? Preferably, I would like to have the size set into three parameters: SIZE_X SIZE_Y SIZE_Z I have tried the model check approach and I am not getting the result I need. When a model regenerates, I need the drawing to scale automatically. I have tried editing the ModelCheck Paramters in .mcs, .mc, .mch. Is there any functionallity that will allow me to access the OVERALL_SIZE attribute and use it as a dynamic parameter? Thanks, Jon
Hi there, who else is annoyed by ptc new layout for the forum? Sure, maybe it looks more like 2017 than before, but is responsive design everything? To me, the new layout is just wasting space and bloats everything up so You keep on scrolling, scrolling, scrolling. Here are some more specific issues: Somewhat between 30 and 50 % of the screen is just blank space (wasteful), especially in topics Almost no differentiation between "normal" text and clickable content blog is gone "my profile" is nothing more than a timeline browser integrated spell checking does not work Maybe the new site looks gorgeous on tablets and phones. But how many ptc-product-using-engineers design their stuff on their phones?
Post
This is no real issue, but an enhancement request: I would like to be able to show the time in 24h format (hh:mm:ss). And the date would be nice in dd.mm.yyyy (not only dd-mm-yyyy). Both are more common formats in europe...
It is uncomfortable and time consuming to save picture to file and load it from file to reply. Martin Hanak
Just thought I share a post that I saw yesterday. Lithium is acquiting Jive. Aint that a kicker. https://www.lithium.com/company/news-room/press-releases/2017/lithium-to-acquire-external-online-community-business-from-jive
I feel that the built-in spell checker is uncomfortable. It has to be activated explicitly and seems not to offer a way to learn it a few new tricks/words ("ignore" seems only to work for the current session). I am used to be able to use the system wide (Windows) spellchecker in most forums I visit and would find it very convenient if this would be possible in this forum, too. That spell checker needs no extra action, is working live in the background telling me of a spelling error immediately after I type the first space after the word and of course is already trained for words I used and it did not know initially (only drawback is that I have to switch it manually from German to English according to the forum I visit). Can we make the system wide spellchecker available in this forum, too? I just notice that the built-in spell checker "hangs". The ABC-field is gray (as if selected) nothing happens and successive click on ABC don't show any reaction. Upo
Using Mathcad Prime 4.0 Express and trying to get the API working in Visual Studio Basic 2012. Dim MC As Ptc.MathcadPrime.Automation.Application MC = New Ptc.MathcadPrime.Automation.Application() A first chance exception of type 'System.NotImplementedException' occurred in mscorlib.dll Additional information: The method or operation is not implemented. note: ssembly mscorlib C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.5\mscorlib.dll What am I doing wrong?
I know things are probably still in transition, but will there be some means of "recommending" the appropriate Label for questions I authored that were migrated from Jive to Lithium? For example, there are currently three (?) questions labeled as "Manufacturing", but I have perhaps dozens of questions (and answers) that pertain to this topic. I'd like to have the things I've submitted assigned to the proper "bucket" so people searching for stuff have a bit more of a chance of seeing them. I don't know what the mechanism of such a thing would be. I'd imagine if I have to submit messages to the powers that be for each and every message that will get pretty horrible for the receiver of all those requests. Allowing entry of the label as text might be troublesome, too, with random variations on the "official" labels and the inevitable misspellings. Maybe a drop-down list of the acceptable Labels for the author to assign them would be good?
(Edit: We will be evaluating issue report submissions through September 30, 2017.) The Support Services and the Marketing Operations teams are aggressively working with Lithium to fix issues now that we are post-launch. In addition to daily calls and updates with our post-migration team, we are working toward providing transparency and a feedback loop for reported issues. Today, we are debuting a new format for our high priority Known Issues and our Resolved issues, as well as a new way to submit issues. Effective immediately, you can view the high-priority Known Issues that the team is working on in the current week. This is a constantly revolving list that shows our top priority issues for resolution ASAP. (Please note that it does not represent all reported issues.) In addition, I encourage you to submit issues that you encounter via the PTC Community Issue Tracker form, which submits it directly onto our issues tracking sheet a
Hi, I try to export a Step FIle because I have to find the Positions of the lines. That works fine for one Part, but not if I vreate a copy/Instance of a part. There must be any reference in the step file to find the instances. Can anyone give me some advice?
Hi @Tmetcalf why USERNAME is displayed in posts instead of FIRSTNAME LASTNAME ? For example: Tmetcalf is displayed in posts instead of Toby Metcalf. MH
In looking at https://community.ptc.com/t5/Additional-Creo-Questions/Eliminating-Linker-Warnings-with-OTK-C/m-p/47584#M4183 I see a bunch of text that has been converted to emojis. For example: public: class xstring & __cdecl xstring:perator+=
When I am at the "PTC Community Help" overwiew page I see an overview of the three sections and am told that "Welcome & How-To's" and "Community Announcement" have new posts and see the date of the last one.Now there are two issues:1) "Welcome & How-To's" 3 new posts are signaledWhen I click on the date of the latest post I am sent to the reply in a thread which I for sure already had read. Also no other thread is showing a new post (the "xxx REPLIES" counter would be green in case of posts I have not read). When I reload the overview page I am still told that there are 3 new post in that section. So I guess this is a bug.In "community Issues" I had not xperienced those problems so far. Here all is working as expected.2) "Community Announcement"This is a collection of blogs an when something is new it could be that the blog was edited or that someone made a comment.I was told that there are 2 new posts and I clicked on the date of the newest one and was sent to a new comment in
Can you provide a condensed theme ? To avoid this extra "useless" space.
I tried using the option to schedule a post to appear on Monday. It appears to have posted immediately. Does this feature not work or has it been disabled? Also, the Post button appear disabled so I saved as draft. Again, it posted. The issue was likely due to the Label. Is there a list of valid labels to choose from. How come we only see two or three listed? And why do cows go moo? Why is the sky blue? If a tree falls in the woods, does it yell timber?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.