Recently active
Creo 4 introduced the concept of creating a mid-plane. This function is great to add a plane in the middle of a part you have access to. What about when you want to assemble a part that already has a mid-plane to a part that doesn't? I can't create a mid-plane because the part is released. In reality, why should I have to edit another part when I simply want to center a plane of part "a" between 2 surfaces of part "b"? Is there a function or trick while assembing to account for this in the same manner as creating a mid-plane? (I don't want to add a mid-plane in the assembly)
I installed, but when I click the shortcut nothing happens.I also received an email with a license file, where do I need to put this and how do I direct Creo to find it?
The attached file provides details on what is new in Detailing.For more information about the enhancements in Detailing, check out the main blog post: 2D Detailing Home: Start Here!There you'll find links to some additional details on these enhancements as well as videos and other comments/discussions...
Where is the new 3d Sweep feature in Creo 4.0 sneak peek?
With every release of Creo I hope the thicken and shell feature will catch up with rest of the pack. Even Inventor can still do better than this:When offsetting surfaces that self-intersect, the feature just fails rather than displaying a warning and absorbing the intersecting surface. Catia has been able to do this for years. It might be usually a good idea to have equal wall thicknesses for many manufacturing processes, but surely that is up to the user. - Perhaps I going to 3D print it, or remove the problematic surface later. Or I might just want to get on with my design without the CAD software failing.I hooped the option to "Prevent shell penetrating solid" might help here, but it doesn't seem to.Why can't I make this surface thicker without the feature failing? Creo should just absorb any self-intersecting surfaces like competing programs do.
Since I'm out of USA and cannot take part in the PTC Liveworx 2017, I hear about Creo product manager VP Sugar Paul introduce some information about Creo 5.0 enhancement plan. I'm very interested in such topic, Could you please share me some more detailed info here, thank you all very much.
The hidden config option "intf2d_out_stroke_text" was added to Creo 3.0 M060 to provide the abilty to create a PDF that exactly matches what Creo generates during printing. With this enabled, TrueType fonts are output where available and all non-TrueType fonts (or special characters) are stroked. (No substitution.) In Creo 3 it made sense to hide this option since it was a change in functionality. In Creo 4 this should be the default behavior for "Use TrueType Fonts". The font output to a PDF should exactly agree with what is printed without have to locate and enable this hidden config option. This would bring align PDF creation with current printing behavior.Furthermore, if this functionality cannot be made the default behavior and must remain a separate selection during output, then an option needs to be added to the different APIs to allow setting this via automation. (Toolkit, etc.)https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS205845
The advanced assembly extension offers some great features. Having said that, not every user has a need for all of those features, but I'd bet that the vast majority do at least occasionally have the desire to use some form of top down design. What are the chances that Creo 4.0 or some future release will allow all users (i.e. not just those with AAX) to do an external merge rather than having to manage another assembly just for that and/or deal with in-context features? I think this would put its basic top-down assembly abilities more on par with some other CAD packages, while still saving its more advanced TDD features for the AAX module. It could help entice some smaller to mid size companies to consider using Creo if they aren't already. Just my two cents...
As I know, Creo 3.0 only supports 32 bit embedded browser, but Creo 2.0 supports 64 bit and 32 bit embedded browser.For heavy task, for example, integration with Windchill, if use 32 bit embedded browser, the performance is very bad.
How to enable Conventional Milling?
Has anyone successfully uninstalled the Creo 4 beta yet? I would like to uninstall the first Beta version that Jim provided in order to install the newer build that was uploaded.I try uninstalling from Control Panel and nothing happens.I try uninstalling from C:\PTC\Creo 4.0\U300\InstallManager by running uninstall.exe as administrator. I get the dialog box below.I try uninstalling from C:\PTC\Creo 4.0\U300\InstallManager by running silent_Group_Uninstall.bat as administrator. It pulls up the Installer, asks me to login, and then hangs and does nothing.Has anyone had some success in removing it? And if so, how?Thanks.
Creo 3.0 is shipped for more than two years, but there are a lots of known regession issues, which still are NOT fixed yet, the following are key ones:Edges behind the selected surface are not shown in Creo Parametric https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS106063Select the second reference forced using CTRL key when creating dimension and measure https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS178061Unable to create "flat to screen" old-style notes in Creo Parametric 3.0 https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS134621Unable to change the splash screen image that shows up while launching Creo Parametric https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS135182How to setup Creo Parametric to display the (List of Current Windows) permanently in an icon tool bar https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS124312Unable to create a GD&T control frame as a note with a box around in Creo Parametric 3.0 https://support.
Whether the following functionalities are included into basic license package? Or need to purchase which additional license?Create "Additive Manufacturing" asm fileOpen/Save a copy AMF (*.amf) filePrepare for 3D PrintingLattice
Refer to http://support.ptc.com/cs/product_calendar/PTC_Product_Calendar.htm, Creo 4.0 ship date is changed to December 15, 2016. As you know, now PTC spends more than two years to release one big version for users, but we have to pay for maintainence cost each year, so it is unfair for us. So I guess Creo 5.0 ship date will be 2018, all right?Creo 2.0 F000 March 27, 2012Creo 3.0 F000 July 15, 2014Creo 4.0 F000 December 15, 2016CATIA, NX, Solidworks and Solid Edge have new big version for user each year.
Creo Parametric has a lot of great features, I still find the Text Editor lacking in drawings. I've even found it more difficult to use since removing the separate Text Properties box.It's 2016. I really think drawing notes should be capable of Tabulation and Numbering (Intuitively and efficiently).Are there any plans to improve Note Formatting/Text Editor?
In the image below, Depth of Field is selected, but its unclear how to set the focal point and how to set the focal point and blur. The DOF effect is not seen in the image below.
Hole feature notes are still easily broken if a dimension or parameter is created that happens to match the ones used internally by the hole feature. The hole feature note should only be referring to parameters within it's own feature for note generation.Example:1.) Create standard hole feature:2.) Create something else with either a dimension or parameter that matches one used internally by the hole feature: (ex. Plane)3.) Create another hole feature. Notice how the thread depth callout is wrong (should be 0.480 is this particular case):4.) Edit definition on the first hole, but don't actually change anything. Notice how it's note is now wrong as well.5.) Now delete the plane (with the THREAD_DEPTH dimension). Both hole note annotations are broken:Solution - The hole notes should be looking at their own feature parameters and nowhere else!There is already an open SPR for this issue. It's been open now for 3 years.
I was just reviewing CS146957 where it discusses the Dx45 chamfer callout and how it doesn't meet ASME Y14.5 standards.The article goes on to say that this will be enhanced in Creo 4.0Just for fun, I tried this in Creo 4.0. I don't see any change. The "x" is still lower case and there aren't any spaces.Does anyone know if the ASME standard changed to allow no spaces and a lower case "x"? If not, then it looks like this enhancement didn't make the cut.Edit: Resubmitting due to Jive notification issue on August 5th.
I hate to say it but the options Creo has always has regarding surface finish symbols are dismal at best. There are really only 3 options available currently and these only offer roughness height as a value to enter. There are at least 4 other variables that can be displayed with the ASME Y14.36M standard including a symbol for the lay. Also there are no options for the older style triangle notations. It would be nice if there was an option box similar to the GD&T toolbar where you can build the symbol by selecting what you want in each portion of the symbol. Instead of it basically being a symbol with variable text. I would think this would not be a difficult improvement to implement. And I know I am not the only one who would like to see this option enhanced.
When using sketcher there is edge/geometry snaping for auto generating references. But this does not work if sketcher plane goes trough model, when "clip model" is on.Is there a plan to implement this? its basicly snaping to take Xsec references.
I am 99% sure I saw somewhere that coordinate systems would zoom in Creo 4. just like planes. I just tested this in the beta and they don't zoom, they stay the same size on the screen. Is this behavior coming in F000 or am I getting mixed up with something else? P.S. It would be nice if the text would also scale down once the plane/csys reaches some sufficiently small size on screen. (Yes, I know the text can be turned off..)Edit: Resubmitting due to Jive notification issue on August 5th.
The default print quality setting - 3 (Complex overlap check) is still broken in Creo 4 B000.What actually exists in the drawing:What gets printed (notice the loss of some lines and the addition of others):This has been happening since the later releases of Wildfire 5.0 and it still hasn't been fixed. https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS70635(P.S. This is not just for exploded views. The views shown above are not exploded.)
On behalf of the PTC team I would like to extend my gratitude to everyone who took part in the Creo 4.0 Sneak Peek trial. The comments and feedback have been wonderful and will really help to shape Creo 4.0 and beyond.For PTC this has been a very valuable experience, which would be impossible without such an active dedicated community. I hope you all enjoyed using the new features in Creo 4.0 Sneak Peek, and obtained a great insight as to what is coming later in the year. If you have any feedback on how PTC can improve the beta testing in the future, then please do let me know. Best Regards, Jim
To PTC representatives,I am just curious on the overall take of Creo 4.0 from those who tested this out was.I know I saw several comments from people who could not get it installed, but wondered how the majority of comments went. Were they favorable, okay, not much better than 3.0, or OMG this much better.I, myself, liked some of the small things that will make life easier when going to Creo 4.0.GD&T advisorOn screen toolboxFull screenDennis
When running removal material simulation using Moduleworks, need to load settings by manual each time. Is there a config.pro option to load Moduleworks custom settings?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.