Recently active
1. Describe the ProblemPTC Universal Browser is intended to facilitate the updates for embedded chromium browser for Creo.By default it's installed in local user directory in C:\Users\%USERNAME%\AppData\Local\PTC\Creo\CEFTherefore to install it for all users of the computer/server, either each user has to install it themselves (which is not always possible e.g. due to user/machine policy restrictions), or it can be installed in another directory (user-agnostic) using e.g. the following command: msiexec /i "C:\Temp\ptcuniversalbrowser.msi" INSTALLDIR="C:\Creo\Common Files\Universal Browser Utility" ALLUSERS=1 /qn In that case however, even though it's displayed as installed for all users, the registry keys responsible for Creo recognizing the updated CEF path are only applied to the user who installed the package - this is an evident error of the installer. The registry keys have to be exported manually from the account which installed the Universal Browser and impor
1. Describe the ProblemIf I have a table in a drawing with text longer than 80 characters, which in my case is a web link to a product, and I want to export this table directly to Excel, Creo will truncate this long web link to 80 characters, which will cause the link to break.2. Are you using a workaround?An alternative solution is to export the table from the drawing to CSV and load the data from the CSV in Excel.3. What is the use case for your organization?It would be ideal to be able to export a table from a drawing directly to Excel without correcting the number of characters.4. What impact does this problem currently have on your organization?It is tedious for me to import a CSV file in Excel and then edit the formatting.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details requir
1. Describe the Problemintroducing APPROXIMATE SURFACE feature will help a lot and I dreamed about such feature a lot since years 😉it helps very often to fix problem with surface when in one corner both boundaries X and Y are tangent to the same reference like in this example:APPROXIMATE SURFACE help to solve this problem due to extend this surface and convert into single together with neighbor surface:but sometimes result of APPROXIMATE SURFACE is not as expected due to lack of quality and many waves on converted surface even when play a lot with following parameters:and sometimes is better to limit the conversion only for necessary smallest possible area:I dream about feature (it can be new one or just an additional option in MERGE feature etc.) when one quilt will be converted into single surface:from this many surfaces quiltto this -> single surface without tangent edges inside The aim here is to obtain exactly the same geometry as the source quilt, but without deformations li
1. Describe the Problem When a secondary Creo object is opened from PDMLink Workspace thru the embedded browser it is not automatically activated. Currently the user has to activate this window manually by Ctrl-A or the equivalent Window command. The new Model Window should be activated automatically the same as when using File > Open. 2. Are you using a workaround?Manually selecting Ctrl-A after the fact.3. What is the use case for your organization?Happens all day every day all users.4. What impact does this problem currently have on your organization?Newer users struggle for the first few months of learning Creo. Experienced users have to explain to the newer users that this inconsistent behavior is just how PTC Creo products work sometimes.
1. Describe the Problemat the moment user must create two separate extend features and set lenght parameters connected/same via relation, whilest it should be possible to pick both edges in the same feature2. Are you using a workaround?manualy by doing two separate extend features3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemin current functionality user can only set two states:1 - set as last read only2 - set all as read only I dream to have ability to set single feature as READ ONLY like in this example: 2. Are you using a workaround?no way at the moment3. What is the use case for your organization?very often but not possible to use at the moment4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemAdd information system about geometry issues as TRAFIC LIGHT SYSTEM 😉 I think about 3 different ststuses: 1 - GREEN LIGHT: when there are no geometry errors2 - ORANGE LIGHT: when some of appeared errors are marked as IGNORED3 - RED LIGHT: when still some geometry errors exist not solved examples for above states: 2. Are you using a workaround?no acual functionality3. What is the use case for your organization?not aplicable4. What impact does this problem currently have on your organization?not aplicableStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemCreo does not allow you to create a bolt circle center marks within the drawing. A bolt circle pattern or feature has to be created using the hole feature, set as diametric, within the part file. If this feature is created using a diametric hole type in the part, then this will allow you to Annotate the bolt circle center marks properly in the drawing.The issue is that most do not create a bolt circle pattern using the diameter type within the hole feature. Most are created using a sketch and then extruding material. Creo does not recognize the center point of and extrude, so center marks do not annotate.2. Are you using a workaround?Yes. A datum point has to be added to the sketch to get a center mark. The center mark only allows for a linear dimensions, not a diametric. To get a diametric center mark, you need to create a cosmetic sketch or create a sketch on the drawing. This is time consuming and unnecessary.3. What is the use case for your organization?Add a
Bounding Box as a Feature Please make a feature in Creo Parametric representing the smallest area or volume in which a design can fit, bounding box. Please spend a few minutes looking at this video from SolidWorks, it is very simple and easy to understand. Bunding Box Chees Erik Sallingboe
1. Describe the ProblemWhen creating solids and surfaces with an extrusion, the default depth setting is "Variable". When cutting solids or surfaces with an extrusion, we have the possibility to select "Through all" to avoid having to change dimensions if the solid or surface we want to cut is enlarged. This guarantees resiliance to design changes. But when creating solids or surfaces, the same resiliance does not exist. We might want to create another body to use as a tool to cut an existing body. Or create an extruded surface to cut a solid. Since we only are allowed to specify a distance or specify a datum plane as reference, it forces us to create those datum planes even for common use cases. a) The idea is to provide another extrude option when adding material to replace the non-working option of "Through all" that only workds for cuts. This option could be called "Beyond" and it would allow the extrusion to be made up-to the extents of a selectable reference, which could be a bod
1. Describe the ProblemWhen cutting solids and surfaces with an extrusion, the default depth setting is "Variable". I find that the vast majority of times when I do those, I intend to cut Through All. By orders of magnitude. So I find myself toggling from "Variable" to "Through All" again and again, and it is annoying. Also: for some reason when I cut surfaces, the default direction is AWAY from the surface, which is rather odd. How often is that the intent? I cannot recall a single time where I have sketched on a surface only to cut another surface with it. In those situations, I usually sketch on the surface I want to cut, or on some datum plane. Please change both defaults.2. Are you using a workaround?Yes, I peck around with my mouse pointer the required extra times.3. What is the use case for your organization?No relevant answer to this question.4. What impact does this problem currently have on your organization?Takes time and causes frustration.Status changed to: Archived 2026-0
1. Describe the ProblemBecause REMOVE feature can require long time for preview generation or very often even crash the Creo, it will be great to PRESET at least two things:- save the model before start REMOVE investigation- activate LEAVE OPEN as defaultin PRESET user should decide if turn on this functions or not2. Are you using a workaround?I created a mapkey to first save the model and go immediatelly to active "Leave open" option3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemcurrently user can select "connected" refferences and will be great th have ability to select them if they are disconnected 2. Are you using a workaround?each disconnected reference must be used separatedly3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemat the moment current functionality require copy first some "Mirror items" to be not a partof whole quilt or solid model, but the geometry exist and it schold be as somple as just pick some existing elements, and the mirror plane 2. Are you using a workaround?at the moment any mirror items must be prepared before the mirror feature3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?noneStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problem in REMOVE feature will be great to have, a list of choosen surfaces under groups (when "Leave Open" is selected) :- remove and permanently delete (0)- remove, byt keep removed surfaces2. Are you using a workaround?manually several times the same RENOVE feature3. What is the use case for your organization?only designers4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemif there are many surfaces generating quilts in the model after while it is hard to manage and it will be fantastic to group some of them to squize them if possible do this also for other elements in DESIGN ITEMS like about: bodies and materials 2. Are you using a workaround?no way at all3. What is the use case for your organization?nothing4. What impact does this problem currently have on your organization?noneStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemas mentioned in topic at the moment there is no ability to hide/unhide bodies during regeneration of copy feature, so in my case I have main body hidden, and during copy redefinition I realised that missing part of the surface is on hidden body geometry, but I wasn't able to unhide this body during, because this functionality just not exist jet...2. Are you using a workaround?end feature regeneration, do missing body visible and redefine copy feature again3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemat the moment user must create many separate features if want to select more disconnected references:it can work like this example: and some references user can pick can be different quilts or even surfaces from current geometry as it is at the moment when on existing geometry we can select whathever want:in upper example in details several references are visible, but adding additional quilts outside the geometry is not possible 2. Are you using a workaround?manualy copy several separate copies3. What is the use case for your organization?only designers time consuming4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
To better parametrically control tangent curves to other geometry, I suggest that the Curve command be improved with a "Stretch Value" at each of both tangent endpoints, similar to what already exists with the Boundary Surface command. In the curve command, there is a Curve Tweak Option, but it's not parametric, and gets reset when one of the tangent points or entities is redefined. As a workaround, we could first create twoo surfaces at both endes, then a boundary surface, tangent to both temporary surfaces, and then copy one of the edges of the generated tangent surface to have a curve that have it's tangent vectors length to be parametrically controlled, which is quite tedious. It's better to have the tangent control "stretch value" at curve creation also, and not only on the surface creation, as currently is the case.
1. Describe the Problem as in trim feature here in SOLIDIFY feature it will be great to have also the same option to choose if we want or not to keep reference surface: can be like in trim 2. Are you using a workaround?manually copy reference surface before the solidify feature3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?noneStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemit will be great to have ability to flip choosen bodies: 2. Are you using a workaround?manualy click all once again3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problem In Creo Simulate's "Analysis and Study" > "Information" > "Model Check,"I would like a feature that issues a warning and highlightsit on the screen if there are components with unspecified materials (PTC_SYSTEM_MTRL_PROPS).Currently, no warning is issued, so if you forget to set the material,you may not notice and may perform an incorrect analysis. 2. Are you using a workaround?Check the analysis results3. What is the use case for your organization?Currently, no warning is issued, so if you forget to set the material, you may not notice and may perform an incorrect analysis.4. What impact does this problem currently have on your organization?Currently, no warning is issued, so if you forget to set the material, you may not notice and may perform an incorrect analysis. Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per thi
1. Describe the Problemit will be great to have ability to just pick some of existing geometry in the model instead manual preparation of necessery geometry reference:it should work like this when I create DTM on this smal surface:here is the result: but if we have many surfaces to replace like here:it can be really time consuming instead of improved version when we will have ti just pick existing surfaces the best more at the same feature (maybe add sets in offset feature) 2. Are you using a workaround?yes in general I use DTM, COPY SURFACE then EXTEND the boundaries to be enough to replace etc.3. What is the use case for your organization?only designers4. What impact does this problem currently have on your organization?time consumingStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the detai
1. Describe the Problemas in following exampleplease add consequtive numbers in this list to help user to pick properly which want to edit2. Are you using a workaround?I must manuallu=y count each feature3. What is the use case for your organization?only me 😉4. What impact does this problem currently have on your organization?not big only I must deal with itStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problem Reference ticket: 17896010 We are working on generating a data model for Windchill PLM and the discussion of what should be stored in Windchill and how it would be stored came up. We were investigating the classification module and the process to enter in data. Since our focus was on maintaining a digital thread, and ensuring no disconnected data, we were hoping that we could map CAD data to the classification module. Unfortunately, support says we can not. By allowing the mapping of CAD parameters to Windchill Classification attributes would allow us to keep the digital thread, but have some data go to classification. 2. Are you using a workaround?No. Any data coming from Creo will NOT be duplicated into Classification.3. What is the use case for your organization?See above.4. What impact does this problem currently have on your organization?It allows us to leverage the benefits of the classification module.Status changed to: Archived 2026-07-06We are archi
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.