Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Enhance Select Related Tree for External ReferencesAcknowledged

1. Describe the Problem The Select Related Tree could use several improvements: External references are not currently displayed. It would be very helpful to be able to select a feature/model and also display the external parents / children, Note: external children might only be possible for the currently open assembly or models in session. When working in assemblies, you first need to activate a part before being able to see Direct Parents / Children which is misleading / confusing for users. It's hard to trust the results if you have to remember to activate first. Or at very least the Creo UI should tell the user "Activate the model for more detailed results". When selecting components in the model tree, it would be very helpful if there could be a summary of external references for the selected component.         2. Are you using a workaround?The current Select Related Tree is not very useful without displaying external references since it only provides a partial view of the references. If external references were displayed, I think many users might use the Select Related Tree to replace/compliment the Tools > Reference Viewer.3. What is the use case for your organization?The Reference Viewer can be hard to use (especially for external references). The Select Related Tree with external references could provide a faster/intuitive way to view all references for a feature / model.4. What impact does this problem currently have on your organization?External references can be hard to understand with the current Reference Viewer. Displaying them in the Select Related Tree could be a faster and intuitive way for users to view them.

Add "Insert Parameter" to Dimension edit GUIArchived

1. Describe the ProblemWhen constructing a parametric note or dimension it would be helpful to be able to enter dimensions and parameters using a list or graphical method. The dimension and parameter selections would work exactly the same as the tools already available in the "relations" dialoge box.Suggested location for new parameter and dimension selection option boxes. Example legacy "Select Parameter from List" capability in the relations interface.2. Are you using a workaround?Either the user must know how to manually construct a parameter or, they can open the Relations interface, then use the "Insert Parameter Name from List" function there.3. What is the use case for your organization?Parametric notes can help reduce the chances for error as the design develops. Its really easy to type "4X" for a pattern, but that can change with time. It would be helpful if it was easier to construct parametric notes/dimensions to aid in adoption.4. What impact does this problem currently have on your organization?Users can often just manually enter information because its "hard" to do. Which can lead to design misses as designs evolve.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Check-in option for replace "not unique" items with items that are in Windchill alreadyArchived

1. Describe the Problem During a Creo check-in to Windchill if an item already exists the upload fails with the message "XXXX is not unique". Often this is because a user has downloaded the same vendor STEP file as another user or the user has accidentally assembled CAD from a network drive instead of from the Windchill repository.   For our organization, the items that are in Windchill already are exactly the same that a user is trying to check in. There should be an option for "replace with items in Windchill" to make it easier for users to check in the parts without needing to search and add the files to their workspace (remembering to uncheck the "Reuse modified workspace content" box).   There should be a drop down option just like there is for the option to remove items from workspace when deleting an item.     2. Are you using a workaround?Yes, searching, adding the items from Windchill to the workspace and remembering to uncheck the "Reuse modified workspace content" box.3. What is the use case for your organization?Save time with training new users, makes it easier for all users to just replace with Windchill objects when that is what they want.4. What impact does this problem currently have on your organization?Lost time from users trying to figure out how to replace what they have with what is already in WindchillStatus changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Dimension Boundaries should appear as a feature.Archived

1. Describe the ProblemWhen the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model.There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help).  An analysis feature in the model tree would be helpful,  (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.2. Are you using a workaround?Not telling users about the capability.3. What is the use case for your organization?When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model.4. What impact does this problem currently have on your organization?Manufacturing could manufacture to the model expecting the model to match shown dimension values. The end result is that bad parts could be made due to the use of a somewhat obscure tool which has no indication in the model tree that the feature has been used. I have confirmed that a model checked into Windchill with active Dimension Boundaries alterations carries the alterations into the Creo View and published step files.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Creating a new Excel file for an Excel analysis should Load that fileArchived

1. Describe the ProblemWhen creating an Excel Analysis, there are two buttons, New, and Load. If you do not have an existing worksheet, the process is:NewIt opens an excel sheetSave (saves as xlsx)CloseLoadChange file type filter from .xls to AllLocate, or realize you have no idea where you saved it and start overIt opens the excel sheetPTC has confirmed that this is the expected behavior. But why are these not one step? If you create a new sheet for use in this new analysis (which doesn't already have one), why isn't it loaded immediately? You'll notice that the results of New and Load are the same, the sheet is open. The only difference is the buttons are not enabled after New, only after Load. It feels redundant and confuses people. The IdeaWhen there's no Excel sheet already loaded, and one is created, load it.While you're at it, fix the default file type filter, which is still .xls2. Are you using a workaround?Am I using a workaround? Just following the confusing roundabout process of creating, saving, and reloading that Tech Support and R&D say is the way it's supposed to work.3. What is the use case for your organization?The use case is creating an excel analysis without going around in circles with the excel file.4. What impact does this problem currently have on your organization?It has confused people. They create a new sheet, then they don't know what to do because the buttons don't work. They try again, it doesn't work. They ask someone else, they don't know, it should work. They end up calling tech support because the buttons don't work, and I have to tell them they have to create it (which opens it), save it, close it, and load it (which opens it)Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

Enable default preferences to load at each startup while allowing user adjustments during sessionAcknowledged

1. What product and version are you running? Creo View 12.1 2. What is the problem?   It's not possible today to specify default preferences that are loaded each time a Creo View session is started, but can still be changed during the session.   Administrative preferences can be specified, but if a user changes them, the changes are saved in the user-specific user_prefs.xml.As a result, the user preferences take effect in a new Creo View session and no longer the default preferences.   Furthermore, preferences can also be administratively locked.But then a user can no longer adjust the corresponding preferences during the session.   For more information, see also the Help Center chapter "Overview of Creo View Preferences". 3. Are you using a workaround? If yes, please describe it.   There is no workaround in use or known.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.   Our specific use case is that we would like to always have the Lite edition preset in the Creo View Startup dialog box (even if a user has previously worked with the MCAD edition) so that users always have to consciously switch to the MCAD edition and thus don't inadvertently block an expensive license.   But also the requirement of the other idea "New Structure Model Tree Search Filters for Creo View 10.1 need Included as Preferences" would be solved at the same time with the implementation of this in my opinion.   5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)   We have several thousand Creo View users, some of whom repeatedly block an MCAD license because they previously worked with the MCAD edition and were too lazy to switch back to the Lite edition.

simplified representationArchived

1. Describe the ProblemAt the moment there is no possibility to control assembly features like welding features or assembly cuts by simplified representations.2. Are you using a workaround?For the welding topic we suppress at the moment all the welding features in the assembly to rise up the performance and before we release the assembly we have to unsupress them. For the assembly features like assembly cuts we don`t have a solution to exclude them at the moment from the drawings to reduce the file size by creating a dxf file. We recommend to the users to create no dxf formats. But we would need them. We have drawings which the dxf file has a size of 2,8 GB. Nobody can work with or handle such a dxf file in other tools.3. What is the use case for your organization?We are using the welding tool and creating not welding parts, we are creating only welding features. The same if we create assembly features as assembly cuts. We want to controll this assembly features by simplified representations either to have the chance to exclude them on the drawing and on the other side to rise up the performance of big welding assemblies. For big welding assemblies the regenerating time ist awful. It costs a lot of time. Also in combination with mechanism assemblies in combination with welding assemblies it`s a big problem.4. What impact does this problem currently have on your organization?Big performance troubles which means a lot of wasted time for the users and so a lot of unnecesarry costs for the company.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.

shrinkwrap hidden itemsArchived

1. Describe the ProblemIf in an assembly one component is hidden, it is automatically excluded if, within a part, an external shrinkwrap feature of the assembly itself has created.From my standpoint it is a “silly” expected behavior because linking the behavior to a view state like hide/unhide is dangerous: you can have features related to shrinkwrap surfaces that temporarily disappear and hence the children features will fail regeneration (for instance a piping start point related to a shrinkwrap surface).This behavior is always active, also if shrinkwrap feature has been configured to “Autocollect all solid surfaces”. If the option says this, it means that ALL solid surfaces should be included in the shrinkwrap, also the hidden ones.2. Are you using a workaround?Yes, using a mapkey to unhide all components before generating the shrinkwrap.3. What is the use case for your organization?We use solid shrinkwrap to avoid assembly features when generating a machined welded assembly. We create a multibody part with the solid shrinkwrap of the welded assembly and then we create the feature representing the machining operations at the part level.4. What impact does this problem currently have on your organization?The actual workaround does not prevent errors, because it depends on the user's attention. The fastest way to fix this is to add a config.pro option to switch on/off this behavior.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.