Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Creo View - Add option to change Markups/Annotations' Font and SizeAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 102. What is the problem?When/After adding a Note, the text size and attributes cannot be changed.  It can only be changed BEFORE adding the note, in File, Options, Defaults, Annotations, Text.  It is every bit as inconvenient as it sounds.  This changes the default attributes for ALL annotations FOR ALL FILES GOING FORWARD.  You cannot change the attributes or font size of an existing note.  If you want one note different, you need to go to File, Options, Defaults, Annotations, Text, change the attributes, Save the settings, make the note, File, Options, Defaults, Annotations, Text, change it back (hope you remember what it was if it wasn't system default), Save the settings. 3. Are you using a workaround? If yes, please describe it.File, Options, Defaults, Annotations, Text, changing the default settings for note text just to change the size of one note, but only BEFORE it is made.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.You should be able to edit the attributes of a note as you create it, or after you create it.  It should be options displayed near the note itself, and also on the toolbar, and the right click menu.  It should let you edit the attributes for the entire note, if the note itself is selected, or for selected text within the note, if only that is selected.  Other common formatting such as justification, should also be included.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)General usability.  This is a pain in the behind to use, and Creo View users, at least in our organization, are being thrust into the world of MBD when many would rather not be.  Something like this will put them off using it entirely.Referencing a previously posted idea by @atoebe , now archived.

Automatically add the date & time for each line in the Message LogDelivered

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 7 until 10 and Creo+2. What is the problem?There is no possibility to enable timestamps that show the date and time for each line that appears in the Message Log.In Windchill Workgroup Manager this is already implemented, so why wouldn't it be possible in Creo Parametric? 🙂  3. Are you using a workaround? If yes, please describe it.You can manually make a timestamp appear by right-clicking in the Message Log and select Date and Time, but this needs to be done manually and this is not a reliable method if you want to see how long a certain process of action takes.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.More insight on how long a process/action takes, this allows us to see how much time it takes for a check-in action for example, or for opening a large assembly, … This would be very helpful in diagnosing issues (for example if an assembly takes a long time to open, we could see using the timestamps if most of the time was spent on adding the assembly to the workspace, or opening the workspace, etc...)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It would be very helpful in diagnosing issues to see if certain problems are caused by a poor connection to Windchill, or by the local resources of the computer, etc...

Allow size/unit conversion of imported DXF/DWG in Creo SchematicsDelivered

Our standard drawing units in most of our designs are still in Imperial Units (Inches). We have started to use metric for our Creo Schematics designs. To transfer a symbol or schematic over without having to recreate it we export a DXF and import to Creo Schematics. If we were previously using inches we get an error message stating: "The sheet Model cannot be imported because it is too large or the units are incorrect" While it's simple enough to change the units and re-export. This assumes we have a native file. If we only had a DXF we'd have to open it in another program, convert it, and then try to import it into Schematics.You can also create formats in the imported units. It would just save time if it was able to do the conversions on the fly.   I would like to see a dialog box that pops up saying "The sheet Model is too large or the units are incorrect. Do you wish to attempt to convert the units or cancel import", or even better to check to see if the units are equivalent for conversion and say so in the dialog box.   It also makes sense from a business standpoint for PTC because it improves the ease of conversion into Creo Schematics formats for future design work from many of the competitors.   Currently there is a closed case (CS59670) on this with the work around to modify the file units or size prior to importing.

Volume Sweep: Cut a solid with a motion of a 3D object instead of a 2D sketchAcknowledged

 Solidworks and Catia have had this for over 10 years. Get with it PTC, you presented this prior to Creo 4 release.  1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.   Medical manufacturing, Product Engineer 2. What product & version are you currently running? Creo 8 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.   Sweep an end mill along a 3d curve and properly represent the resultant geometry. I can program it in CNC, but I cannot show it in CAD, nor cad I render or simulate the proper geometry.      4. What is the use case for your organization? we do this all the time.  5. What business value would your suggestion represent for your organization?   It should be obvious, we cannot show the proper part geometry across the platform. We cannot simulate it, render it, or describe in cad model. But i can create the physical item via cnc. If I can make it on a machine I should be able to show it in CAD.    As stated earlier, PTC's Paul Sagar showed this prior to Creo 4.0 release at a PTC event. All the major CAD players in the industry have this functionality and have for over 10 Years. This should be basic functionality for modern cad, especially given what we pay for this software now. Our cost have gone up exponentially with little to no basic updates. 

Update Area Hatching Functionality to use the newer, Creo 9, Section Hatching tools in a drawingUnder Consideration

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.6.0 2. What is the problem?When editing hatching in a drawing, for areas (like an ECAD Keep-Out), it uses the old menu manager system and not the newer ribbon in Creo 9 method that is used for section hatches. This is confusing our users who are expecting a consistent process for managing hatches.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The hatching mechanism and process would be consistent for all use-cases within Creo5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This is causing slow down, confusion and some users are not even attempting to edit the hatching for areas as it is difficult.  All of our products have PCBs, which use ECAD features. Now our users need to juggle these inconsistent processes. When the new functionality was rolled out in Creo 9, it should have been done to all hatching workflows.  Users ~100 Hours ~Hard to quantify as this also impacts the overall impression of the tool and this feeds fuel to the users who don't have a lot of nice things to say about Creo.

The semantic references for general profile tolerance should get automatically updatedAcknowledged

1. Are you using a workaround?Yes, we have to go into GD&T advisor to make the updates2. What is the use case for your organization?Here is what the help documentation used to say: The semantic references that are associated with a general profile tolerance are automatically updated with every model change. This is what I want.3. What impact does this problem currently have on your organization?This is not "automatic" which means I need to train users on how to use it and make it work. Training is not fool proof. I want fool proof. Its confusing to users that sematic references automatically get updated when they create geometry but not when they add annotations.Describe the Problem In Creo 10 a new fantastic feature was introduced that has an overall surface profile collect up all of the sematic references that are not currently tied to another annotation and makes them a sematic reference of a overall surface profile note.   https://support.ptc.com/help/creo/creo_pma/r10.0/usascii/index.html#page/whats_new_pma/gdt_general_profile_tol.html    The help documentation used to say that this was "automatic". And it is for creating new geometry which is great. If I make new geometry it automatically finds the new surfaces and puts them into the default surface profile.   It does not automatically subtract surfaces from the default surface profile if a new annotation is made outside of GD&T advisor. If the user goes into GD&T advisor and clicks "update" then the sematic references for the default surface profile will be updated. This is not "automatic" though. This is "to specification".  

Sheet metal rules automation in creo parametricAcknowledged

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I work in collaboration with a design for manufacturing group. My task is to list some rules established in order to avoid some manufacturing problem when we design particularly in sheet metal. 2. What version of Creo Parametric are you currently running?I am currently running creo parametric 7.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.My goal was to automate sheet metal rules in creo parametric in order to have some errors or warnings displayed automatically when we don't respect rules established. I have already searched some sheet metal rules in model properties in the sheet metal module but the verification is manual through the window "model information" where we have design rule-violation check.  I have also found the tool "check rule" in files>prepare after previously added relation like MC_MODEL_TYPE ='sheetmetal' but it only display some added rules. Those rules haven't any effects in the model. So I suggest the automation of the sheetmetal rules through "Model check " or a mapkey to create automatically the verification of rules. Furthermore, if it is possible you can add other rules or let user add other rules. You can also categorize some existing rules like  minimal distance between rectangular hole and bound , between circular hole and bound etc... For example of rules I want to add: "if the length of a rectangular hole is superior to 15*thickness, the minimal distance between hole and bound is 5*thickness" 4. What is the use case for your organization?This allows some designers to apply some design rules established inside the organization in sheet metal.5. What business value would your suggestion represent for your organization?This represents the design quality

The "Reference viewer" command is very powerful but slow.Acknowledged

1. Are you using a workaround?no, I don't use any workarounds2. What is the use case for your organization?With our licenses we cannot use the "copy geometry" commands so we sometimes create external references and dependencies. Creo Parametric does not allow you to duplicate an assembly if dependencies are defined within it, so in this case we use the "Reference viewer" command only to view the dependencies of the children.3. What impact does this problem currently have on your organization?a few minutes, but repeating the command would be very appreciableDescribe the ProblemCurrently when I run the "Reference viewer" command, the program starts doing all its calculations and then displays all the references and dependencies, and if the assembly is complicated it takes a long time.What I suggest is to create a further command that gives the user the possibility to preset what he needs and then start the calculation.For example: I call this new command, the program opens the "Reference viewer" window but without results, the user selects what he needs, for example displaying only the dependencies showing only the children and only then pressing a button does the calculation begin.I suggested creating an additional command so as not to create problems for those who are used to and still find the old command convenient.I personally would prefer what is suggested and manage the various situations by creating specific macros.