Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Feature parameters can be input and changed together.Acknowledged

1. Are you using a workaround?As for the pattern feature, if it is deleted once, then the feature parameter is created/changed, and then patterned again, it is reflected in the pattern all at once. However, repatterning often takes longer.2. What is the use case for your organization?Improved input efficiency for feature parameters. In particular, it is desirable that feature parameters such as patterned parts can be input and changed together. Please consider the following three improvement plans. *Methods other than the proposed three may be used. -improvement plans- (1) Apply to all by input/change to one model in the pattern. (2) Apply to all in the pattern by inputting and changing to the pattern feature itself. (3) Select multiple models to apply feature parameters to all of those selected in the batch input/change.   3. What impact does this problem currently have on your organization?The more components and the more pattern features, the more man hours it takes. For large assemblies, there are many components and there may be more than 30 parts per pattern feature. Since the values of all components need to be manually entered and further checked in 2D/3D, man hours tend to increase compared to the CAD drawing correspondence used until now. The corresponding effort for each subassembly is about 2 hours more than previously used CAD. Since there are approximately 265 subassembly drawings for the product, 2h x 265 drawings =530hDescribe the Problem The correspondence of the feature parameter “SYM ” will be explained with an example.Feature parameters are used for numbering drawing balloons, etc.Parameter values are manually input one by one on the model tree, and the more components or pattern features, the more input effort is required.When it is necessary to change the value for a design change, etc., it takes man hours for the change because it is manually changed one by one.      

TaskAgent - Setting the language for output of Multi-language DrawingsDelivered

Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?20.6 2. What is the problem?In Annotation, drawings can greated with the multi-language drawings module, in several languages.With the multi-language drawings module, the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.3. Are you using a workaround? If yes, please describe it.We use a language module from MAIT, which was programmed for us. The language change takes place in the TaskAgent with the Drafting.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.- The use of the language module makes sense if there are several development and production sites.- One development site can create the document in its local language.- Other development sites can switch to their local language.- In production, however, several languages are needed.- With the language module the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.- The language module is a great solution from my point of view, but does NOT cover the end-to-end process.- Unfortunately this makes the new language module unusable!- In the TaskAgent it should be possible to select which primary and secondary language should be output.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)With the Multi language module the production data (PDF) is created with the set language by the user. So it can NOT be guaranteed in which language the production documents are available.It is not possible to change from the customized MAIT module to the multi-language drawings module.

specify model tree columns and width for individual modelsAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?       CREO Parametric 9.0.6.02. What is the problem?   when changing model tree width or adding columsn this is  done for ALL active models. this is not helpful as I don't want these model tree changes to be reflected in all model, only in the active model.3. Are you using a workaround? If yes, please describe it.  no, not possible,  unless keep changing model tree settings4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.e.g. in part models you may sometime need to see Feature # and Feature ID,  but not for all models. sometime you may want to see windchill information for all componants in a specific assembly, but not in all assemblies in session.  in CREO 9 this differentiation is not possible anymore (in CREO 4 this was)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)much more user efficient and less waiting time (e.g. when showing windchill attributes for a specific assembly,  and then openen a very big assembly, this take very long time to collect and display all information for all components, sometimes even CREO crashes.

UserID cannot be obtained correctly with Creo Elements/Direct License Server 20.6.Acknowledged

[Original title: Creo Elements/Direct License Server20.6にてUserIDが正しく取得できません。]   1.どのような製品とバージョンを実行していますか?What product and version are you running?Creo Elements/Direct License Server20.6   2.問題はありますか?What is the problem?UserIDが14文字以上の場合、UserIDの尾が削られて正しく表示されません。例えば、添付ファイルにはUserID欄にkouta.hachimoと記載がありますが、正しいUserIDはkouta.bashimotoです。If the UserID is 14 characters or more, the tail of the UserID will be truncated and will not be displayed correctly.For example, the attached file has kouta.hachimo in the UserID field, but the correct UserID is kouta.bashimoto.   3. 回避策を使用していますか? 「はい」の場合は、それについて説明してください。Are you using a workaround? If yes, please describe it.いいえ、回避策はありません。No, there is no workaround.   4. あなたの組織のユースケースは何ですか? あなたのアイデアが中断の中でどのように機能するか、またはそれが 実際の状況にどのように適用されるかを説明してください。 What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. 5. この問題は現在、あなたの組織にどのような影響を与えていますか? (影響を受けるユーザーの数、生産性の低下時間など) What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)類似したUserIDがあり、正しく判断できません。 There are similar UserIDs and I cannot determine them correctly.       Translated by the moderation, using Google Translate on May 10, 2024. -----------------------------------------------------------------------------------------------

Creo Illustrate / Search function for 2D/3D figuresAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.12. What is the problem?No search function for 2D/3D figures.(see also my question "Search function for 2D/3D figures in Creo Illustrate 10." in the forum).3. Are you using a workaround? If yes, please describe it.In the future we will store all our images (for operating instructions) in a database. All the images will only consits of a 11-digit number. Each image will be connected to a Creo Illustrate file. In the Creo Illustrate file all figures will have that same 11-digit numbers. The 3D figures like 12345678001, and the 2D figure like 12345678001_.So a big Creo Illustrate file will have e.g. 50 figures consitsting only of 11-digit numbers.So, to find an image (figure), the editor needs a serch function (not a filter function) to highlight the figure in the list of all figures.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.?? see 3. above.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)No impact at the moment but big impact in the near furure (we are at the beginning of a big transformation process, where we will create all of our images with 3D models. Also the currently existing original photos).

"Checkout on the Fly" needs to wait and collect all affected objects rather than one by oneAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.5.0 with Windchill 12.02. What is the problem?There are some situations where Checkout on the Fly pops up more than once.  It can happen during large assembly regenerations, but notably happens when saving a backup to disk while modelcheck has things to do on save.  In these cases, especially when combined with Modelcheck, you can get Checkout on the Fly, one by one, for every object in the assembly (because it's becoming "modified in session").  One - at - a - time.  When this happens you can't even interrupt the process.  You're stuck in it for the long haul, or you exit with the task manager.  It needs to wait, see what all is affected by the entire operation, THEN present you with the checkout options. (function() { var wrapper = document.getElementById('lia-vid-6352472817112w996h540r373'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)3. Are you using a workaround? If yes, please describe it.Disable check out on the fly before save as backup.  This has the problem that it is not something most users should change.  It is now disabled and if it is not reenabled they'll have further problems as they continue work.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It needs to wait, see what all is affected by the entire operation, THEN present you with the checkout options.  Even in situations where it currently does that, the list can be so long you don't really know what's in it.  It would be nice if it handled large lists better, too.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)You either kill it with the task manager, restart Creo, and disable the feature, or you could be clicking for hours.  It's worse if your default checkout on the fly option is not what you want to select, adding two more clicks for every component.  At this point, if your data is saved, you can kill it and restart.  But if you have something you didn't save that you don't want to lose (the reason you were saving as backup), I hope it's worth the time it takes to finish the backup operation!

Open native Creo multi-sheet drawings in Creo ViewAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 10.12. What is the problem?When using Creo View to open Creo Parametric native drawing that has multiple sheets, Creo View will only open the first sheet.  All other sheets show as Blank with no data.3. Are you using a workaround? If yes, please describe it.Yes, the current workaround is not really a usable process but it requires the user to first open the Creo Drawing and update all sheets of the drawing before saving to disk, once this is done the drawing can be opened displaying all sheets correctly in Creo View.  This workaround is time consuming and completely makes the ability to open a multi-sheet native drawing in Creo View unusable.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Ability to open the native drawing and all sheets correctly or provide an option for how the drawings are created to at the very least allow the drawing to be opened completely including all sheets.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Not a huge impact as this is a corner condition use case but does limit the use cases and usability of Creo View for being able to collaborate with users that may not have Creo Parametric licenses or have a copy of a PDF available.

Creo View Adapters - Assigned ChoicesAcknowledged

1. What product and version are you running?Creo View and Creo View Adapters 10.12. What is the problem?The "Assigned Choices" for Configurable Product components are not visible in the Windchill published viewable.3. Are you using a workaround? If yes, please describe it.No workaround in use for this issue. Non-linked configurable products (not Windchill linked to a variant specification to prune the assembly) use an assembly parameter to track the options available. This parameter is added/updated manually and is prone to mistakes.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.As more of our models leverage Configurable Products with Variant specifications, the assembly parameter is no longer updated but we would still like to be able to see the options in Creo View. Instead of copying over the assigned choices into an assembly parameter, it is preferred to just display the choices available. The options can be listed in a column (similar to Parametric) and the column added to the Creo View session as needed.Design Engineers would have the data they need when viewing the models in Creo View and would not need the options available open in a separate application window.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Exact number not known, roughly 100 people at the moment are affected. Biggest "problem" is that linked configurable products lack the manual assembly parameter and manually maintaining the parameter takes time.

Datum_Target_Area_Multiple_Sign with Spaces for ASME (capital_x update request)Acknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.4.02. What is the problem?Drawing/Model detail option setting - 'datum_target_area_multiply_sign' set to "capital_x" (default) - not in conformance with ASME Y14.5.  ASME Y14.5 states that, in the Use of "X" to Indicate "By", a space is to come before and after the X. The Creo solution for the "capital_x" option value does not provide such spaces for the target area types of Rectangle and None.  This misalignment also exists pre-Creo 9 - a detail option to change the display doesn't exist, but the standard display for Rectangle and None target area types does not include spaces before and after the "X" symbol.3. Are you using a workaround? If yes, please describe it.Workaround could be to manually generate local note to supplement symbol display in order to get full specification to align with ASME.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Specifying the size of datum target areas.  User could populate Creo fields as intended and immediately align with ASME standard without any additional manual manipulation in the drawing graphics.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Currently not measured.