Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Surface Selection GroupAcknowledged

1. What product and version are you running?Creo Parametric 9.0.7.02. What is the problem?It can be tedious and repetitive to select surfaces to add to an annotation's semantic references to support Model Based design.      It would be helpful if there were tools to create an manage "Surface Selection Sets" which could exist as a Custom Group to be able to be selected while defining an annotation or applying model color, etc...There is a related selection tool improvement request which will help, but a "Surface Selection Set" capability would also be a good complimentary capability.3. Are you using a workaround? If yes, please describe it.No, just many many clicks.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.For a relatively small design I needed to select 267 surfaces to include a surface treatment note.  Then I will have to click that again to apply a special profile tolerance.   Then potentially again for surface finish annotations.   So we are over 750 clicks to properly semantic reference 3 (yes three!) annotations.   After chamfers and rounds are added, and having to click on both parts of the cylinder for each hole the clicks really add up.    5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Many, Many, Many clicks.   Repetitive and tedious clicks.   Taking much longer to complete a simple task than is necessary. 

Import assigned mass properties from Inventor parts and assembliesAcknowledged

When importing a non-native file, in my example from Inventor, the assigned mass properties are not being transferred to Creo.Feedback from PTC support is that this is technically not possible.Screenshot showing assigned mass prop in Inventor:Trying out the sollution first suggested in the support article did not seem to be working. This product idea does suggest continuing with such a technique.If the assigned mass property would be copied to a designated custom property in Inventor, then an interface could be provided in Creo Parametric , such as a configuration setting that would enable the value of a fixed parameter (f.e. FINSIHED_WEIGHT) to be copied over as the assigned mass property. Mind that this example above is a simple block, but purchased components that are used as (multi-body) parts need this assigned mass property to have a correct weight in assemblies and further along the line in PLM.Below an example of such a part. Referring to article CS384714 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.The industrial manufacturing industry collaborating with different companies/departments that use other CAD-software, f.e. Inventor, NX, SW,...2. What version of Creo Parametric are you currently running?Applicable for Creo  7.0.10.0 to 9.0.x.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.See top of the post.4. What is the use case for your organization?Purchase parts that cannot be assigned a single standard/real material density.5. What business value would your suggestion represent for your organization?Having correct weight for parts and assemblies influences multiple departments of a company.From engineering to run calculations to logistix for shipping details.

DEX - Branching ImprovementsAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 - Using DEX (Design Exploration Xtension)2. What is the problem?Branching features are not intuitive. What I am proposing:You should be able to create a branch off of the last checkpoint. You shouldn't need to have a subsequent checkpoint afterwards to branch off of it. Let's say I know that I want to have 3 concepts, each with 3 different sub iterations (1a,1b,1c and 2a,2b,2c and 3a,3b,3c). Today, Creo DEX requires me to make a 4, before I can make 3a,3b,3c. That doesn't make sense - it requires users to create a dummy concept below to get around this... Maybe you could right-click the checkpoint and instead of saying "create new checkpoint" it could be "create new checkpoint or create new branch" and that way it knows if you want to continue at same level or create a lower level option (branch)Going off my example above, what if 1a, 2a and 3a all require the same features? Today, I would have to repeat the steps and do all that work 3 times and save 3 checkpoints. It would be cool if I could create a branch off 1 and tell DEX to go apply the same features on subbranches of other checkpoints (i.e. I make 1a and tell it to go make a 2a and 3a using the same steps).3. Are you using a workaround? If yes, please describe it.Both ideas I have extremely tedious workarounds which make DEX less attractive for our organization to use. We do a ton of concept design though, so improving DEX in these ways would mkae it much more likely for a wider group in our org to adopt DEX into their workflows.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Early-stage concept development as we are part of a large product development team at a consumer electronics company5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Workarounds are slow and tedious and drive people to not use DEX (or at least be afraid of using it). These are 2 simple changes which would have immense benefits to the user and would make DEX a more compelling tool in the toolkit of a product development engineer.

Please improve default hole charts and notes.Acknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO Parametric 9.xxx2. What is the problem?The default values in hole charts and hole notes have no relation to commonly used engineering standards.  The values for NPT holes and small machine screws (2-56, etc) are especially bad.   Editing these charts is extremely time consuming.  Considering there are widely used international standards (ASME/ISO, etc.) defining proper hole callouts, why are these not the defaults?  Also, why can't you easily switch hole note formats (ie: ASME to ISO and easily save any needed customizations?  Software users shouldn't have to learn how to edit obscure tables to accomplish something so simple.  Fixing this has been an enormous waste of my time.3. Are you using a workaround? If yes, please describe it.Yes, I'm changing all of the default notes to match ASME/ISO standards by hand. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.My idea would result in time savings for each company that uses Creo Parametric, as I'm sure every organization has had to make these changes individually.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Would have saved me hours of editing/figuring out how to edit hole notes.

LOW HANGING BIG FRUIT!! - "Insert Parameter Name From List" for Annotations and Tables!Acknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.7.0 2. What is the problem?Users don't like remembering the parameter name or code to make their annotations or tables smart. They would rather type "INSTALL ITEM 10, AFTER ITEM 30, BY APPLYING ITEM..." instead of "INSTALL ITEM &LINENUMBER:FID_502330:5, AFTER ITEM ...." It is impractical.   The answer is simple... Creo already makes it simple!   However, it is in the relations dialog with the "Insert Parameter Name From List" button. All PTC needs to do, is take that functionality, copy it to the FORMAT ribbon, add the & symbol when a parameter is added, and they are done. This should be really easy and make it much more useful for the everyday user. All they need to do is start typing their note. Whenever they want to reference a parameter, they use the button to grab the parameter, without caring about the code, feature ID, or session ID or even remembering each name for each parameter. We need to K.I.S.S. 😘3. Are you using a workaround? If yes, please describe it.After using Creo for decades, I finally had the idea to go into relations, get the code and copy and paste it into the annotation. Most users don't know that. Most users won't search online. Most users would rather take the easier approach, even though it could be slower and introduce much higher risk of errors or discontinuities. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Any time an individual wants to include data in an annotation, that is already stored and managed by a parameter, they don't need to manually type in the code (if they know it). They can use the button to add it to the annotation.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Over 100 users. Easily thousands of hours a year. Each time someone manually types something in, increases the risk of it being wrong and creating a disconnect to the wrong data.   I would have added the button to the annotation ribbon myself, but this button is not part of any ribbon (just the relations), and therefore it is not available.   Can this get any simpler? This is so easy, and yet so powerful and meaningful. All the what's new videos would start with this new change and make it the biggest improvement of the version. And yet, it is so easy!   @mneumueller  @mfischer 

Sheet Metal Bend Notes Leader Type Config OptionAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 9.0.8.02. What is the problem?Sheet metal bend notes are hugely inflexible. There is already another idea about the number of decimal places for the bend angle, so I won't re-iterate that here. We need to be able to remove the leader that gets created every time a bend note is moved, so that it will work with our sheet metal CAM software. At the moment, the designers have to export to dxf, import to the CAM software and then manually delete all of the leaders that have been added.  3. Are you using a workaround? If yes, please describe it.Yes, manually delete the leaders in the downstream software.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We have a downstream piece of CAM software that etches the bend angle into the sheet metal using the laser. It does this using the bend note from the 2D drawing, which is automatically produced by Creo. In many cases the automatic note is not in a sensible place so must be moved. Doing this immediately creates a leader, which must be removed before the laser etches the design onto the sheet metal.The idea, therefore, is to add a config option or possibly a detail option to control the creation of the leader. Ideally it would have options for leader type, with one option being no_leader.  5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)We have approximately 30 designers that are affected by this problem. Each drawing created can take between 5 and 60 minutes to tidy up in the downstream system, depending on complexity. This adds up to many man hours lost productivity per week. 

Render gate is not honored when rendering video using 3d page size for Sequence or Animation mp4Acknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.02. What is the problem?The render gate is not honored when rendering video using 3d page size for Sequence or Animation. Where the camera sits when you render any animation for an mp4 or avi local save is completely unpredictable. I have no idea where the edge of the video will be until after it's rendered and I have to compose the shot based on trial and error rendering, re-rendering until the camera is in an okay spot. It's literally unbearable  and I have been working in Creo Illustrate for about 5 years. Surely this is user error, how could this possibly be the way this was designed to work?? No other software does this.3. Are you using a workaround? If yes, please describe it.Trial and error, render, adjust camera key frame, re-render, adjust camera key frame, re-render (trying to not go crazy).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We are making videos for training service technicians. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)If the render gate would actually honor where the true edge of the frame would be, it would save hundreds of hours of rework and frustration.

Select Both Surfaces of a Hole in One ClickDelivered

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.9.02. What is the problem?Holes and other circular extruded features result in two half-cylindrical surfaces, rather than one continuous cylindrical surface. This often results in situations where one must click twice as many surfaces, such as when selecting surfaces to add to an annotation reference. 3. Are you using a workaround? If yes, please describe it.In some cases, the search tool can be used to find all hole surfaces, but this is rather advanced for less experienced users.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.A modification to the selection filter or some other aspect of the select tool would be beneficial. For example, we often need to select certain holes within a larger pattern to be highlighted by an annotation. Currently, we must select both halves of each hole, all the while holding CTRL and moving the camera around to "see" both sides. I can imagine a config option, selection filter, or other method the user could use to by default select both "halves" at once each time they select a hole surface.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)This doubles the time it takes to select hole surfaces.