Skip to main content

Filter by idea status

Filter by product

6851 Ideas

view manager column width - save settingAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.3.02. What is the problem?The "View Manager" dialog box column widths are not saved after user adjustment inside the dialog box.  Example - The user opens the View Manager dialog box to view a long list of custom simplified representations.  Some have longer descriptive Names that are partially obscured by the second column due to the default dialogue box column width. Name column width, making it difficult for the user to distinguish between them.  To reveal the full Name, the user may choose to either autofit by double clicking the vertical column border line in the heading bar or click and drag the border line to expand the width.  After closing the dialog box, the width resets to the initial narrow width and the user must repeat the column adjustment process, adding time to the workflow.3. Are you using a workaround? If yes, please describe it.I am not aware of a workaround since there is no known config.pro option and the column width of this particular dialog box adjustment cannot be triggered by mapkey.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.By allowing default column width to be either overridden or saved, repetitive steps can be avoided.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Several Creo users - all use simplified representation functionality.  Dialog box is accessed multiple times per day.  Lost time difficult to estimate, but fix seems to be a very practical user interface improvement that is easy to implement and inconsequential to function of software.

Improve the insertion of welding symbol in drawing with a graphic interface easier to useAcknowledged

Currently in the drawing of Creo Parametric 6 the weld symbols are generic symbol saved/hide in a  system folder (System Syms). There is no special button for the weld symbol. Then the users have to choose the Weld Symbol file and then select a lot of checkboxes (hide in other checkboxes) to edit the symbol as you can see in the following picture:   Notice that the preview of the symbol on the right is small and every time you have to change the dimensions of the preview panel and enlarge the window. And every time you change something, the preview loses the zoom.   This interface is difficult, slow and sometimes frustrating. And you cannot change the type of Weld Symbol, you have to delete it and create another symbol from another file and clicking the same checkboxes.   So I ask you to replace this method with a special tab for the welding symbols, like what happened for the Geometry Tolerance in Creo Parametric 4.   I know that there is a Welding application in Part and Assembly, but sometimes what is necessary is only the symbol in the drawing (like for the Datum Feature Symbol)   I want you to notice what are the Graphic Interface for the weld symbols of other CADs:   Inventor: Solid Edge: Solidworks As you can see, everyone of them has its special graphic interface for the insertion of  welding symbols in the drawing..  

countersink screws and patterns don't work as intendedAcknowledged

1. Describe the ProblemThere has to be a better way:  assemblies with countersink holes & flat head screws. I have a hole pattern of countersink holes.I assemble a flat head screw to this hole (shank to hole, tangent the hole surface to the screw taper.  it then want's a 3rd constraint.  I add a parallel constraint: plane to surface..) I then pattern the screw, to follow the hole pattern The screws then all follow some weird pattern.  They are all there; the dots show the proper placement, but the screws are all wonky.  Only the original is properly placed in its hole.  The others are all then floating in space, randomly.. (from what I remember this has always been a problem..) Either fix the way the pattern function works with these type of constraints  (its the tangent constraint that causes this behavior..)orFix / find a better way to constrain countersink holes & flat head screws..2. Are you using a workaround?constrain the hole to shank, then constrain screw head to surface. But this does not identify if the screw is proud or recessed on the part.. Easily allows for an interference..3. What is the use case for your organization???4. What impact does this problem currently have on your organization?wastes time trying to figure out the cause.. holes may be the wrong size when the parts are made..

Enhanced merge feature in Creo with inbuilt tolerance settingAcknowledged

1. Describe the Problem Oftentimes, especially when working on models partially derived from imported geometries, it takes a lot of effort and time to obtain a closed quilt that can be solidified. A suggested improvement is to include a third option in the merge feature (or create a separated “approximate merge” feature, if preferable): this option could be named Auto-stitch or similar naming.If the user selects the Auto-stitch function, a “tolerance” field is activated, where the user can select any value greater than the model Accuracy. Possible implementation:First attempt: the software extends (Same/Tangent/Approximate) both sides of the open gap + mergeSecond attempt: if the neighboring patches cannot be extended, a tiny surface is created (e.g. Boundary Blend) that fills the gap (preferably with tangent-tangent boundary conditions; free-tangent or free-free would be acceptable in the worst case scenario) On a side note, the Creo Import Data Doctor has some tools that allow to obtain approximately this result. However, having an ordinary feature outside of IDD would be hugely beneficial, when additional features are required after the “Import” feature that can be edited with IDD. Sometimes it is simply necessary to add features outside of IDD, which would make an “enhanced merge” a significant improvement. Siemens NX and Catia V5 have features with this kind of option (named Sew and Join, respectively). Moreover, Autodesk Fusion has a Stitch feature, which has a nice-to-have additional menu: the list of open gaps is displayed, in ascending order, and the user can specify to set the Stitch tolerance equal to the size of one of the listed gaps. This allows to save time in trial-and-error iterations playing with the tolerance value [see attached Screenshot no. 3]. Business valueAn improved merge feature would speed up the design process and subsequent model checks: solids typically make clearance checks faster and allow to evaluate mass properties, among other benefits. Attached files: The first picture shows two quilts (very simple geometry) that are separated by a 0.3 mm gap. The second picture is a suggested way of allowing users to select the enhanced merge (if keeping it as an “option of an existing feature” is preferable). The expectation in this case is to obtain a single merged quilt if the user selects Auto-stitch and enters a value at least equal to 0.3 mm. The third picture refers to Stitch feature of Fusion. 2. Are you using a workaround?Currently using external software (e.g. Autodesk Fusion) and reimporting Step files in Creo, to be further processed where patches are still disconnected. Sometimes, it's possible to apply a quick fix in Creo with "Remove" (leave open setting, keeping the removed surface) and subsequent "Merge" (join option).3. What is the use case for your organization?Design of toolings referencing imported models (e.g. STEP files). A second scenario might be a concept design phase, where obtaining an approximate solid model would be totally acceptable if it can shorten the time needed, compared to using the currently available surfacing features.4. What impact does this problem currently have on your organization?On complex models, it's either necessary to spend time in fixing individual surfaces or simply accept that such model won't be solidified (not ideal, but acceptable if the model is only assembled for visual purposes or if it's enough to solidify a "partial copy" of it).