Recently active
1. Describe the ProblemSince the interface change allowing hatch management (Creo 9).It is no longer possible to create a hatch in a plan and save that hatch to disk (to build a library).This feature was available prior to version 9.This represents a loss of functionality that impacts productivity and information standardization.2. Are you using a workaround?Unfortunately, there is no workaround because it is not possible to save the hatch pattern for reuse or modification.3. What is the use case for your organization?Hatching a section in 2D or 3D.4. What impact does this problem currently have on your organization?The generated documents do not comply with company conventions. The documents are therefore non-compliant.
Measurements should be capable of being captured in a way that includes the effect of explode state. Currently measuring between entities produces results that only refer back to the non-exploded location of components. It would be helpful for basic service procedure verification activitites if the measurements could be made on the exploded states in the 3D model rather than having to go to a drawing to take these measurements.
1. Describe the Problem In an effort to streamline library creation and ecad_hint.map updates, we would like to request that Creo has a config option for the default ECAD_PART_TYPE value. This way, if the parameter is missing in the library, or the hint file, we can control the default behavior. Currently, Creo treats the default as a mechanical part. However, 99.9% of the library components that are created as electrical. 2. Are you using a workaround?Adding the parameter into each new library part. 3. What is the use case for your organization?We have massive libraries that leverage ECAD MCAD collaboration. Having more control over the behavior is ideal and can help streamline the library creation process.4. What impact does this problem currently have on your organization?Extra effort to generate library models and maintain the hint file.
1. Describe the ProblemAt the moment there is no possibility to control assembly features like welding features or assembly cuts by simplified representations.2. Are you using a workaround?For the welding topic we suppress at the moment all the welding features in the assembly to rise up the performance and before we release the assembly we have to unsupress them. For the assembly features like assembly cuts we don`t have a solution to exclude them at the moment from the drawings to reduce the file size by creating a dxf file. We recommend to the users to create no dxf formats. But we would need them. We have drawings which the dxf file has a size of 2,8 GB. Nobody can work with or handle such a dxf file in other tools.3. What is the use case for your organization?We are using the welding tool and creating not welding parts, we are creating only welding features. The same if we create assembly features as assembly cuts. We want to controll this assembly features by simplified represent
1. Describe the ProblemIf in an assembly one component is hidden, it is automatically excluded if, within a part, an external shrinkwrap feature of the assembly itself has created.From my standpoint it is a “silly” expected behavior because linking the behavior to a view state like hide/unhide is dangerous: you can have features related to shrinkwrap surfaces that temporarily disappear and hence the children features will fail regeneration (for instance a piping start point related to a shrinkwrap surface).This behavior is always active, also if shrinkwrap feature has been configured to “Autocollect all solid surfaces”. If the option says this, it means that ALL solid surfaces should be included in the shrinkwrap, also the hidden ones.2. Are you using a workaround?Yes, using a mapkey to unhide all components before generating the shrinkwrap.3. What is the use case for your organization?We use solid shrinkwrap to avoid assembly features when generating a machined welded assembly. We cre
1. Describe the Problem Reference: Ticket - 17405204 Article - CS421194 The New Creo Mapkey UI has some room for improvement: It defaults to showing all of the Admin Mapkeys first. We have hundreds of Admin mapkeys that 'flood' the list and make it hard for the user to manage their personal mapkeys. If a regular user wants to manage their mapkeys, they shouldn't have to scroll all of the way to the bottom or collapse every time they go into the menu. With the old method, where the mapkeys were stored in the config.pro, you were able to see syntax errors with mapkeys. Specifically, if there were lines in a mapkey that didn't end in a semicolon, then all following lines would show as an error in the config menu. Having some indication in the new UI that there are broken mapkey lines would be helpful when developing and debugging mapkeys. 2. Are you using a workaround?Collapsing or scrolling each time I needed to edit a personal mapkey.3. What is the use case for
1. Describe the Problem SPR 14980355 introducted a "Select a certificate" popup that prompts users to choose a client certificate to send to the server for authentication. The popup appears every time Creo Parametric is started. In our case, there is only one certificate available, so the popup does not provide any functional use and is purely an annoyance for the user. 2. Are you using a workaround?No.3. What is the use case for your organization?If there is only one client certificate, the popup should be bypassed and the client certifcate should be sent to the server.4. What impact does this problem currently have on your organization?The popup causes a delay in Creo start-up, and is a poor user experience.
1. Describe the Problemwhen creating hole, using "from feature" option on point which created on "non parallel" surfaces the hole keeps original orientation which leads to wrong result ( from user perspective ). the user expect the hole to be perpendicular to each of the surfaces 2. Are you using a workaround?in some cases, limited, using the option copy->paste ( advance ) solve the issue. in most case it isn't3. What is the use case for your organization?general design activity4. What impact does this problem currently have on your organization?loss of productivity
1. Describe the Problem There is no way to define tags on the client side (e.g. in the Diagnostic Tools or using an environment variable), which are saved with the Creo session data and sent to the Creo Performance Advisor in order to be able to filter for session data with certain tags. 2. Are you using a workaround?There is no acceptable workaround.3. What is the use case for your organization?The company I work for has several locations where Creo is used, but the license server is centralized in one location for all of them. So the Creo Performance Advisor data all converges under the site that manages the licenses. In the Performance Advisor dashboard, however, it is no longer possible to filter for the data of a specific location, so that admins only see the data relevant to them.4. What impact does this problem currently have on your organization?Since relevant data, such as frequent crashes or outdated Creo versions, is lost in the mass, the admin of a location can't recognize
1. Describe the ProblemWhen a user creates a copy of a 3D file and forgets to include the linked drawing in that step, there is no automatic way to link a later created copy of the drawing to the previously created 3D file.2. Are you using a workaround?User would need to create a new copy of the 3D and either re-do all the work, copy all the work, or reference the previously created part.3. What is the use case for your organization?Simplification and don't punish users for missing to copy a further object early on.4. What impact does this problem currently have on your organization?If the drawing was missed in the save-as command, users have to spend at least 30 minutes in order to correct that small mistake. Feature request would be to offer an option, as it is available in assemblies, to replace the model in the drawing with: - Family Table (this exists today in the Replace Model command) - Reference Model - Existing copy - Assembly containing the model - Unrelated component Replace
1. Describe the ProblemAccording to https://www.ptc.com/en/support/article/CS276894, ProToolkit does not have any direct way to modify the 3D graphics background color. I confirmed with a tech support representative that this is still the case.2. Are you using a workaround?No. We discussed possible workarounds and none of them were feasible for us.3. What is the use case for your organization?We wish to take snapshots of the model in various configurations for our reports, and would like the background color to be configurable for when we take said snapshots. We are using ProRasterFileWrite, so either modifying the background of the display area itself, or modifying ProRasterFileWriter so a background color can be specified would work.4. What impact does this problem currently have on your organization?Model snapshots in our reports will not be visually consistent.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the a
1. Describe the Problem When Creo Parametric is connected to a Windchill session, the 3D model tree automatically gets the super helpful Windchill status column. This helps users understand statuses like Checked Out, Out of Date, etc without having to constantly check the Workspace. Unfortunately, there's no similar functionality for 2D drawings. Please add the same ability for 2D drawings so users can quickly know if the drawing is Checked Out, Out of Date, etc. without having to track it down in the workspace. It would also be helpful to have the Windchill actions (Check out, Update, Lock File, etc.) available via right click in the drawing model tree. 2. Are you using a workaround?User has to manually check their workspace for this information which can take 30 seconds or more if there's a lot of objects in the workspace. User's often forget to check. We've added a custom Windchill tab to help with the lack of Windchill quick actions. We added the following buttons: Check O
if i have a simplified representation from an assembly, it should be possible, to export this presentation in step format, only simplified. Espacially if there is a subassembly, with an excluded part and an material cut in the subassembly, and the same subassembly with that included part the export of this presentation excludes all parts. In that case the Export will be incorrect! Only if i exclude the first subassembly, the export will be correct. see STEP_SUB.zip
1. Describe the ProblemThe weld symbol generated in Creo Weld application applies primary semantic references to BOTH the weld surface, and the surfaces that the weld touches. This surface collection could be improved by making the weld surface the primary reference, and making the surfaces the weld touches as secondary references. See image below showing the current state of the Semantic Query for a welded multibody assembly, showing the primary references for the simple fillet weld symbol. 2. Are you using a workaround?No current workaround.3. What is the use case for your organization?This enhancement will make MBD (Model Based Definition) much easier to consume for welds especially in downstream contexts (3D PDF, STEP AP242, QIF etc.)4. What impact does this problem currently have on your organization?Diminished usability in Model Based datasets.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of
1. Describe the ProblemFirst in FIND tool I see different naming system -> should be equal 😉here is the example:in model tree the name of example feature is "Trim 196" whilst in search tool the same feature has the name "TRIM_196" Second thing is the search result for all default features - does not work why? Example:in result window user can see only those features which renamed by self, but I dream to have an option to also search and show as result also all default features names 2. Are you using a workaround?manually change more often feature names3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemThe current Pro/TOOLKIT API lacks an essential capability related to flexible assembly components — it is not possible to add new varied items to a component that is already flexible.At the moment, this can only be achieved through complex workarounds, and even then, only partially.To add a varied item using Toolkit, the existing flexibility must first be removed and then re-applied via ProAsmcompFlexibleUnset() and ProAsmcompFlexibleSet(), passing all previously defined varied items (ProParameter, ProFeature, ProDimension, ProGtol, ProSurfFinish, and ProMaterialItem) along with the new one.This approach introduces multiple issues:Existing varied items are lost when flexibility is unset, so they and their corresponding new values must first be collected using visitor functions before unsetting flexibility.After resetting flexibility, the new values are not automatically restored, requiring another iteration to manually reassign them.Varied mat
Currently, if a link is added to a note, the entire note becomes that link. Follow common industry practice and add the link only to the selected text, which will also allow multiple links per note.
1. Describe the Problem There is currently no ModelCHECK check for determining view-related layer status in drawings. drawing dependent layer statusview-related layer status 2. Are you using a workaround?Some users activate the layer object selection in drawings so that the colored view frames are displayed. The color of these frames can at least visually indicate whether any view has a view-related layer status set.3. What is the use case for your organization?In principle, it's only very rarely necessary to set a view-related layer status, but sometimes there is no way around it. If you aren't the creator of a drawing that you are currently editing, you often don't notice whether view-related layer status are available. And in my company there are several hundred Creo users, which means that it's very common to have to change drawings from other people or to use them as templates for new drawings. It would be very helpful if ModelCHECK could report view-related layer status.4.
1. Describe the ProblemDescription:When creating a coordinate system in Creo, the software currently allows users to select three planes that are not perfectly perpendicular to one another. This behavior can cause significant issues during the manufacturing process. In our workflow, we frequently use product surfaces directly as references for coordinate systems. However, some of these surfaces are only approximately perpendicular rather than exactly 90 degrees. As a result, this leads to errors during NC programming and machining.Proposed Improvement:We would like to propose that Creo include an additional validation or option when defining a coordinate system:Automatically verify that the three selected planes are mutually orthogonal.If they are not, the system should either prevent the creation of the coordinate system or display a clear warning to alert the user.Benefit:This enhancement would help users avoid potential machining errors, improve manufacturing accuracy, and ensure co
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Electro Mechanical company. I'm the Windchill responsible and using Creo as mechanical engineer.We just migrated from Solid Edge to Creo2. What version of Creo Parametric are you currently running?7.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.As described above we migrated our organization from SolidEdge to Creo and missing certain "basic" functions which were available there.One of the features we are missing is the "Quick view cube" which was available there. A simple cube in any corner, rotating with the displayed model. When clicking on the cube, the view oriented as selected, so in above example it would then orient to the Front view.4. What is the use case for your organization?Especially in bigger assemblies you are quickly lost how you are looking right now at the m
1. Describe the ProblemIn some cases Creo will automatically "flip" an annotation to the other side of it's leader, if a symbol is associated to the annotation the symbol will no longer appear to be located correctly in relation to the annotation. PTC says this works as designed currently. So the request is to have the associated symbol "flip" when the parent annotation flips so that the symbol maintains it's relative location to the annotation. The attached video illustrates the issue very well. It's worth noting that fixing this manually is fairly easy in the example shown where it is a discreet model, but there really is no fix for family table models.2. Are you using a workaround?Reposition the symbol when there is a discreet model. However if it is a family table instance there is really no way to fix this other then having unique annotation sets for each family table instance.3. What is the use case for your organization?This occurs with many annotated family table models whi
1. Describe the Problem Reference: Case: 17891712 Article: CS451598 We had created a few custom appearance .dmt files many years back and only recently noticed that all colors are sorted alphabetically (good) except for the first color in the .dmt file (bad)! In our mind, it should have been alphabetical! The response from PTC, in the article, says "The reason to sort the default color first is so that it is easily accessible for users to restore to its default setting." I'm not sure that is intuitive to the user. We weren't aware of this 'exception' for many years. If someone wanted to sort it first, they could always rename it such that is is earlier in the alphabetical sort! 2. Are you using a workaround?Editing the .dmt file, such that the first color is the first one of the list alphabetically. That means, that if we ever add a color which should be sorted even earlier, we need to remember to put it in the beginning of the file.3. What is the use case for your organization?Ma
1. Describe the ProblemIn Creo 11, SMT_THICKNESS is no longer possible to edit from the Edit Definition dialog (or Edit Dimensions for that matter). You have to open menus to find it. This is not at all efficient. Please restore the previous way of editing it.2. Are you using a workaround?As stated above - via the Preferences menu.3. What is the use case for your organization?Any time you create a sheetmetal part and want to change the material thickness, which I do a lot since almost everything I work on is sheetmetal.4. What impact does this problem currently have on your organization?It's more time-consuming than before to do this.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemWhen the user runs ModelCHECK on an assembly. ModelCHECK looks at each model individually. If the user has objects in Read-only they have to wait and click "OK" for each object. This wastes a lot of time. ModelCHECK should first run all the models against the conditions.mcc file, then report all the model warnings at one time. (function() { var wrapper = document.getElementById('lia-vid-6377533476112w834h540r776'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)2. Are you using a workaround?Be very careful to not click "All Models". Or, kill the Creo Parametric sessio
It would be useful to be able to move a copied sketch around as if it was a single block. Currently when you paste a sketch you are given an opportunity to move it as a block, and then future moves run the risk of deforming it if you aren't very attentive. See below for an example of this issue. I would like to be able to dimension it from other entities without changing the existing point relations.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.