Recently active
1. Describe the Problem It would be nice if the behavior described in the following video was implemented within the round feature (eg. as a new type of transition) (function() { var wrapper = document.getElementById('lia-vid-6355662017112w960h540r58'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos) Could be something like this 2. Are you using a workaround?Yes, the one described in the video3. What is the use case for your organization?We used to create round on open quilts and we are always forced to create a curve and a trim feature to obtain the geometry we need4. What impact does this problem currently have on your organiza
1. Describe the ProblemWhen showing reference designations on a drawing, can more parameters be included automatically?Currently all we see is the ref-des using "Show Model Annotations".2. Are you using a workaround?Yes, each ref-des is edited after being shown.3. What is the use case for your organization?Creating harness drawings.4. What impact does this problem currently have on your organization?Time
1. Describe the Problem after saving a drw file as a dxf file, if file name contains uppercase letters, it ends up being displayed as lowercase letters, this issue does not exist while saving as .prt and .asm file. As per article CS122825, we could only pose a new idea in the PTC Community, could you please consider implementing it in the newer version of Creo Parametric? we are now using Creo Parametric 6.0.4.0, but this issue also remains in the Creo 9.0.4.0 as per my testing. 2. Are you using a workaround?manually rename file name.3. What is the use case for your organization?Export Drawing to DXF4. What impact does this problem currently have on your organization?If there are too many files, users need to waste time modifying them.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Design systems / assemblies to address client challenges - from initial concept to delivering final product.2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.A system Parameter containing the working directory path would allow a drawing to be 'parametrically' documented with the directory file location in which that drawing was developed. A requirement of some quality control procedures is to know and record the file directory of the source of the document. A Creo system parameter that can be accessed within a drawing would allow this to be parametric instead of having to enter the path manually. This would be a 'Creo' system parameter - available within drawings without the use of any product data management.4
1. Describe the Problem Currently the labels in the Mapkeys Window UI do not align with the config.pro mapkey syntax. This causes confusion and make updating mapkeys slower and mixups are frequent. 2. Are you using a workaround?N/A3. What is the use case for your organization?Administration effort to maintain mapkeys in config.pro is prone to mistakes mixing up the MAPKEY_NAME and MAPKEY_LABEL when updating the Creo Ribbon buttons or Quick Access toolbar buttons.4. What impact does this problem currently have on your organization?This is a needless burden on admins to maintain and update mapkeys used in the Creo Ribbon or Quick Access toolbar.
Hi, It sometimes becomes frustrating to draw a spline each time a Partial View is created in a drawing. It would be fantastic to have an option to draw a rectangle to border the Partial View! Most of our views are Partial Views, as we work with Top-Down Design methodology and so Drawing Views always have Very-Far Off-Limits Copy Geometries that expand the actual size of the View. So, Besides the Spline, Please add an option to draw a Rectangle as a boundary for The Partial View.
1. Describe the ProblemWhen we want to create a continous weld from 2 beams like in the reality with fillet and groove in order to use Creo Simulate, it is not possible to create it in the fillet weld or grrove weld! 2. Are you using a workaround?We create an extrude feature to represent the weld.3. What is the use case for your organization?The bench design requires the design of real welds to do simulate calculations.4. What impact does this problem currently have on your organization?This slowed down and limited the design process, we don't use the Creo weld feature and weld simulate connections to have the best result regarding the reality.
Based off the discussion here:http://communities.ptc.com/message/186964#186964When defining a detail view in Creo Paramentric 2.0 M010's drawing mode, the current requirements are : 1. Select a center point on the drawing you wish to create a detail view of. (One click)2. Sketch a spline that encloses that point. (Minimum four clicks)3. Select a center point to place the detail view.I have a number of objections to the spline as the default method of defining the area of a detail view.1: As written, the operation currently requires at least six mouse clicks.2: It is difficult to generate a smooth looking spline that does not result in messy view boundaries without sketching a draft circle and laying the spline down on top of that.3: The center point of the view can't be attached to a space in between two features so that it shows both of them without defining an extra point or (maybe) construction geometry.4: The preferred option for a detail view boundary (at least on my end) is the A
Circle shape as Boundary of the Detailed View in the drawing in Creo Parametric. Now Creo uses sketched curve as boundary. Boundary of detail view is rough and doesn't look good.
1. Describe the ProblemThe creation of trail files cannot be disabled. See https://www.ptc.com/en/support/article/CS35307 Is it possible to disable the creation of trail files in Creo Parametric 2. Are you using a workaround?Yes, as described in CS353073. What is the use case for your organization?We have different computer configurations for various reasons: - Win 10 and Win 11 installation (transition on-going) - One or more local drives (C:\, D:\) - Different user groups: From designers working predominantly working in Creo Parametric to seldom user.4. What impact does this problem currently have on your organization?The trail file location historically was on the D:\ drive, which no longer is available on all installations. We rarely use the content of the trail files. Hence instead of deleting the fails using purge (or other methods) it would be useful to disable the creation of trail files at all by providing a config.pro option.
1. Describe the ProblemWhen creating a solid part of a pipeline, there is no default part template selected. This often results in the template not being selected and the required attributes to be missing off the part that are required for our Windchill PLM system, along with strange mass properties behaviour, no default views, planes, etc. 2. Are you using a workaround?Ensure to always select a template. Use modelcheck to ensure a template has been used.3. What is the use case for your organization?I would suggest that a configuration option in config.pro along the lines of template_pipingpart to be available, or for the system to use the default solid part template as a default.4. What impact does this problem currently have on your organization?Almost every time a pipe is produced (we design maybe 10-20 per month) the part template is missing, and so the part must be recreated, along with any drawings etc.
A functionality that would make Cabling excel would be to enable support for Devices with Pre-Assembled "Pigtail" wires/cables and Pre-fabricated cables without the need to generate new instances every time they are added to a new assembly. Take for instance a Sensor or Surge Protection device that is sold with 18" conductor leads. Instead of modeling the wires in Creo Parametric, I would like to define the pre-assembled wires as Entry csys where I can predefine all of the parameters including the addition of "MAX_LEN" Then when added to a Cabling Assembly, it should become its own harness and if when routed the length is longer than "MAX_LEN" then route would fail do to this. In this way, there is no need to create a family table and new instance for each application. Same would go for Pre-Fabricated cable assemblies. The connectors on each end should be dynamic so that one could assembly each independently and the Cabling application could levera
When an IDF or IDX is used with Collaboration from the ECAD team, and NO mapping file is setup; creo defaults to looking for a PART with the same name in the IDF or IDX; not an Assembly. The issue is that, if an Assembly does exist, there is a high probability that the part is inside the assembly with added information in the assembly as well. By pulling the part in, you loose all of the information in the assembly.
1. Describe the Problem Reference: Article - 419866 Ticket - 17339489 A flat feature is not able to be bent a full 180. As the bend value grows larger and larger to 180, the flat distance stops referencing the reference edge of the part. Rather, it starts to reference a point in space and then stops working altogether when it gets close to 180. A flange has no issues bending to 180. See video:(function() { var wrapper = document.getElementById('lia-vid-6354757664112w962h540r176'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos) 2. Are you using a workaround?The engineering design team struggled to get the geometry they w
1. Describe the Problem Please reference: Article: 360568 Ticket: 16206056 SPR: 13491483 We created geometry points on a sketch such that we can help route a ribbon cable thru those points within the cabling module. When trying to add location, and specify those points, the ribbon becomes twisted. According to R&D, this is per design as the path of the ribbon will be parallel to the sketching plane that the point was created on. Where-as, if it was a regular datum point, it simply goes thru the point, like you would expect. If we were sketching, we would need to do it on a plane that is perpendicular to the direction we want the ribbon to travel. This is not ideal for many reasons, including: I don't believe this concept of a direction being dictated by the reference plane of an object was ever used before. Up until we had PTC write this article, it was unknown. A typical user would not think this is how it should behave, based on how the tool be
1. Describe the Problem When creating broken views, depending on the size/scale of the view and the geometry involved, selecting the Heartbeat or S-Curve Options for the Break Line Style often results in a comically oversized break line that is unusable. The workaround is to sketch a spline in the size and shape you want, but they never look as nice as the pre-defined geometry. If a couple of anchor points could be added to the break lines that would allow you to scale the height and width of the break lines, it would be much cleaner and easier to use these break line styles. For example on the heartbeat style, an anchor point at the point of the heartbeat could be used to grab and drag to scale the height/amplitude of the heartbeat and another at the end could be used to grab and drag to adjust the scaling of the width/wavelength of the heartbeat. Perhaps a 3rd could be added to allow you to drag its location and snap to various geometry poin
1. Describe the ProblemLeroy, Isofont and Cal_Alfs font height does not control the overall character height. The height goes to a midpoint in the height. This makes no sense. There should at least be a reference height provided. PTC Tech Support says it works to spec. I can't imagine a use for this and tech support can't explain a use for it either.2. Are you using a workaround?I tend to use fonts that display the full height of the character such as norm_fonts. I prefer the look of leroy or isofont, but it is too difficult to get a 1/4" character height on those fonts.3. What is the use case for your organization?Add a reference dimension to the overall height of the characters. The dimension to somewhere in the middle makes no sense.4. What impact does this problem currently have on your organization?Each time I have to engrave a part in manufacturing that leroy, isofont or cal_alfs needs to be used, I need to go the extra step of drawing lines in place
1. Describe the ProblemProvide a way for users to be assigned technicians that speak a similar dialect of the language they speak. Each time I connect with a technician from tech support, I talk with people who have thick African or Indian accents and being from the Midwestern U.S., it makes it almost impossible to get past the language barrier.2. Are you using a workaround?None3. What is the use case for your organization?When I contact Vericut's CG Tech Tech Support I contact their US Support team. They are a global country and when I need help, I am always talking to someone that speaks clear US english. There may be some Southern accent, or some East Coast, but it is always easy to understand. That is where PTC needs to be.4. What impact does this problem currently have on your organization?It affects me and my decision to even bother calling tech support.
1. Describe the ProblemFrom datum points, I need the ability to create best fit: Line, Circle, Arc, Cylinder, Plane. You should be able to select graphically, or by pointset features, and create a line, arc, circle, cylinder, and plane. It should also state the average and max deviation. The software has been lacking this simple ability that many other CAD packages have."2. Are you using a workaround?Not in CREO. I open NX CAD software and to it. Would be a great reference on how easy it should be.3. What is the use case for your organization?This would work when I have multiple points or objects that I need to know the best fit plane of. Or CMM data analysis.4. What impact does this problem currently have on your organization?I frequently go back and forth between CAD software just for this function. This functionality has been missing and if a frequent source of frustration for us.
1. Describe the Problem Default BOM Balloons can change size based on the length of the text withint the balloon. Defined Symbols don't have any option or means to do this. The option to allow geometry to change based on the number of characters within a shape would be great! 2. Are you using a workaround?Currently we are using the max balloon size for the expected maximum expected text length. It uses a lot of space though.3. What is the use case for your organization?It would improve our drawings.4. What impact does this problem currently have on your organization?Less readable drawings, and more time wasted on placing balloons with more limited space. They also look less nice.
1. Describe the Problem When user set up text height in a table cell it is not kept after using double click. It works when using Text Editor only. This is superconfusing for most of the users. 2. Are you using a workaround?Forcing users not to put text into cell via double click but by Properties/Text or Text Editor.3. What is the use case for your organization?New drawing.dtl option "table_text_height" valid for table cell only will solve this.4. What impact does this problem currently have on your organization?Confused Creo user
Replace by copy is currently only available for parts. It is grayed out for subassemblies. This functionality should be extended to allow subassemblies to be replaced with a copy. When replacing a subassembly you should be given a dialog box similar to file, save a copy which lets you either copy or reuse the components of the subassembly.
1. Are you using a workaround?Yes, we are setting imported parts to read only one by one now.2. What is the use case for your organization?I was playing around with the new Creo 11 performance reporting (using Creo 9 in production) with an imported CCA. There were a couple of imported components that had complex geometry that was taking 4 seconds to regen. These components were patterned and Creo was performing a regen on each component each time and it was adding up to a lot. Setting the imported feature to read only changed the regen time to 0. In total, the Regen time for this CCA went from 1 min to 4 secs just by putting 3 imported geometry component features into read only mode.3. What impact does this problem currently have on your organization?This has a big impact on performance times for large assemblies.Describe the Problem Imported parts (step files) in general are not meant to be modified. The design authority for the geometry is controlled by the creator of the imported fi
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 7 until 10 and Creo+2. What is the problem?There is no possibility to enable timestamps that show the date and time for each line that appears in the Message Log.In Windchill Workgroup Manager this is already implemented, so why wouldn't it be possible in Creo Parametric? 🙂 3. Are you using a workaround? If yes, please describe it.You can manually make a timestamp appear by right-clicking in the Message Log and select Date and Time, but this needs to be done manually and this is not a reliable method if you want to see how long a certain process of action takes.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.More insight on how long a process/action takes, this allows us to see how much time it takes for a check-in action for example, or for opening a large
It would be highly beneficial to instead of only having the option to Save a Copy, but to also open that new copy at the same time. Very often I would like to make a new part that is a modification of a released part. To do that I Save a Copy, then I have to make sure I capture the new part number that was generated. Then I have to go into my workspace and find that part, and finally open the part so I can start my modifications. If I forget to grab that generated part number before I go off and do something else, then I have no hope of finding that part again later and I just make a new copy. But if there was an option to Save a Copy and Open, I can get to work faster and don't have to worry about getting distracted and missing the generated part number.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.