Recently active
To learn more, follow this link
Hello All,I wanted to take a moment and thank you all for the experiences and interactions over last 5 years. I'm moving on to an opportunity outside of PTC. I feel honored to have worked alongside such intelligent, professional and creative individuals. It surely is a bitter-sweet. I leave you in the capable hands of Ryan Kelley. Ryan brings some great energy and ideas. I'm sure his partnering with the community will only bring a continued success.Notable mentions: Gentleman, thank you to you especially for making my day-to-day life easier. I definitely could not do my job if it wasn't for your support and expertise Mike Armstrong, Richard Jackson, Antonius Dirriwachter, Valery Ochkov, VladimirN., Brian Martin, Alan Stevens, Vladimir Palffy, Joshua Houser, Radovan Micek, Kevin Bradbury, Harvey Hensley, Mike Lockwood, Camilo Parra, Gerg Frankland, Roger Mansfield, Steve Choryan, David Butz, Alan StevensFeel free to visit my profile for contact info such as LinkedIn if you wish to stay
I am a starter of MathCad. I have a question that i could not understand.Wenn means if statement-Is that mean for example G6(t) equals F1(t+a+w+delta) as long as (t+a+w+delta) less than Period ? Otherwise G6(t) equals G6(t-Period) ?
Hi Rohit,I'm not sure as to what you mean by "thickness analysis", but if you're referring to measuring the thickness of a uniform cross-section of a part, you just go to the analysis tab and select measures. You can measure the thickness by edge length or by distance with surface-to-surface. What version of Pro|Engineer are you using?
Follow this link for more information.
Beim Messeauftritt von PTC auf der Hannover Messe 2014 werden konkrete Lösungskonzepte in den Vordergrund gestellt und größtmöglicher Wert bei der Umsetzung von Geschäftsinitiativen vermittelt.Wir freuen uns auf Sie!Besuchen Sie uns in Halle 7 / Stand E28.Weitere Informationen: http://www.ptc.com/go/hmi
Laurens,I replicated your "problem", and I think the reason the displacement won't update is because you selected Legend Values in your template. This will lock in the max value. I ran two cases, as shown below. Figure 1 is using the settings you showed, and Figure 2 is running the model over again with 8000 N and I selected just Units for the template, and it updated the displacement fringe.Figure 1Figure 2
Online registration and complete agenda details for PTC Live Global 2014, June 15-18 in Boston are now available. Sign up early for your top choice of PTC University training and a $100 early-bird discount. Never been? Join us there to learn hundreds of time-saving tips, tricks and best practices to reduce design and implementation time, and optimize your product development processes. You’ll also build your PTC Creo and PTC Windchill technical skills through 160+ hours of hands-on PTC University training.Past attendee? You have to come back to gain additional techniques and best practices, hear about upcoming product enhancements, and make new connections in the PTC customer community.This June, you’ll also experience: 20% more customer-led sessions (and more first-time presenters!)PTC Creo 3.0 and what’s new in other PTC solutions A “Smart, Connected Products” Showcase at the Solutions ExpoPTC’s Vision for How the Internet of Things is Transforming Manufacturing Father’s
I selected the icon for User Defined Template as shown below, and I got three windows. The fourth is the one I added from my run. I didn't see any Displacement_Stress_test.rwt to select from as you showed previously from the above discussion. I'll just create one as you showed and run the model over again.
Hi Laurens,I looked at your model, and I plotted your template with the correct legend. I ran the model over again and plotted with no template, and then I compared it to your template values for displacement. I'm going to run your model again, and create a new template to see if I can replicate the error. Figure 1 is a run by itself. Figure 2 is your template with with my run added.Figure 1: Displacement with No TemplateFigure 2: Using the Template
This is a nice model, and I like the way you used the intersect function to give the wing an upward twist. I think what Jun wants is a continuous rounded leading edge until it tapers down to a rounded "point" (instead of having a flat end...see images below). This will require a bit more work to implement, and it's something I would like to see for myself. I don't know if this can be made with just a parallel sweep.
Timing screw model by Antonius Dirriwachter.First, a big thanks to Brian Martin for his help on keeping our PTC Community members updated on the conversations he was a part of at our Technical Committee meetings in partnership with PTC/USER which took place last week here at PTC headquarters. You can see his full recap in the discussion listed below, if you haven't had the chance you can submit your product enhancements to the PTC Technical Committees to review this summer. More to come on this as we get closer to their next section.Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Enhancement Requests for Creo - January 2014 TC MeetingsBy Brian MartinWriteDXF - Create 3D models mathematically in PTC Mathcad Prime 3.0By Brent EdmondsModeling linear or torsion spring in MechanismBy Dakota MillerDid You Know? Tips for Creating Advanced Round GeometryBy Thomas McKeownDimensioning in PTC CreoBy Matthew Gardne
Also, can you upload your input file? This would be your model (.prt file ext).
I will need the solution directory that the results are based upon. In the mean time, I will run a small test model to see if I produce the "same" results.
Hi Laurens,Can you upload the file? I would like to take a look at it.
Try the below link:https://www.ptc.com/appserver/auth/it/esd/product.jsp?prodFamily=ENG
Hi Mark,The color of the on screen information such as "Structure: 3D Native Mode" or the default tolerances is defined by the System color for Secondary highlight. See the below images.
The 1st and 2nd planar walls were created off the same datum plane (FRONT), so no flipping is required. Yes, if you use the surface of the first planar wall, and it doesn't matter if it's the front surface or back surface, you will have to flip the the 2nd planar wall for proper alignment.
Daniel,In your attached model image, it appears that that first planar wall was flipped, which is opposite of the default direction. Once this is done, all planar walls created after this will have to be flipped. Figure 1 shows the default direction. If you keep the default direction, then the additional walls will look like Figure 2, and no flipping is necessary. It's not just creating a planar wall, but even an extrusion, as shown in Figure 3, the default direction will be towards the operator, providing the sketch is on the brown side of the datum plane. If the datum plane is rotated to the backside, the datum plane line will be black (these are default datum plane colors). Why Creo wants that default direction is beyond me, but you can avoid a lot of flipping by keeping the first planar wall in the default. I don't like it either, and I prefer to extrude features away from my view.Figure 1: Default DirectionFigure 2: Adding a Planar Wall in Default DirectionFigure 3: Default Direct
Hi Brian,In your model, it looks like the name A is being locked by Extrude 1. Deleting the Extrude 1 feature in the model will allow you access to the name A. You will also need to delete the gp0 and gp1 annotations. You will have to rebuild some of your model, but that will be easy since it's a simple model. It should only take you a few minutes. I was able to make a datum with the name A as shown below. This may not be what you wanted to hear, but this will fix it.
Steam locomotive model by Highway45.Lots of great conversations happening here at PTC Community over the past week, so let's dig right in with a highlight of some of the community's favorite content from the discussion forums and beyond. Here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:Helical sweep with variable pitch vanesBy Buck CooperAdd/Remove More plot lines automatically from a vector plotBy Jake Roth Video Link : 4631By Pawan DawarePlotting a CylinderBy Thomas HartmanWriteDXF - create 3D models mathematically in PTC Mathcad Prime 3.0By Brent EdmondsPro/Sheetmetal Bend QuestionBy Robin FragomanCosmetic threads? Hiding threads in hidden line removed viewBy Dale RosemaDirect calculation of a volumeBy Denis JauninAnnotation color in CreoBy Mark EvansFeel free to click on any of the links above to discuss, like, rate or reply to any of this weeks' posts. Congratulations to our highlighted members for
I have sent you each a link for this blog, so hopefully you can see this message. I have looked at it for a bit and the only way that I can see that you can add your own blog posts is to give you the username and password. I must trust you not to give this information out to someone other than a team member. I must also trust that you will NOT go in and change any of the settings for this blog. That being said, just be sure that you identify yourself at the beginning of each post so that I and the team members will know who sent the post.Thanks and I hope that this enhances the RWDC Team experience for all concerned.-**********
At Planet PTC Live 2012, I promised everyone a "cheat sheet". The purpose was to help those unfamiliar with Creo Cabling to navigate the application. After many hours of laboring over this unassuming front/back of a page, I think it's ready for Prime Time. Here's a quick peek (which is a little fuzzy). But don't worry, the full-sized PDF attached to this Blog features much better resolution!As you can see, one side of the sheet features a Cabling Icon Quick Reference for Creo Cabling. The other side features a Quick Routing Procedure I follow when creating harnesses using the "Ninja Cabling" techniques I presented in Orlando. This version of the cheat sheet was created especially for Wildfire 5. I plan to create additional sheets for Creo 1 & 2.Over the coming weeks, I'll have additional content like this to post to the Blog so stay tuned! Eventually we'll move into deeper discussions of piping and cabling but for now, I want to post as much relevant, useful information as I can. P
Hi Brian,If you can upload the model, I will take a look at it on Tuesday morning, and if you don't already have the problem resolved by then. I will be away from my office on Sunday and Monday is a Federal holiday for us. In the mean time, you could upload some images of your model with the entire model tree expanded (with nothing hidden or suppressed). If you're getting that message, then you have something already named "A" somewhere in your model.
Hi Denis,This is "similar" to the way Autodesk Inventor does it. They have a tool where you just select the surfaces and fill in the void, but they still have to compare the two volumes.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.