Recently active
1. Describe the ProblemWhen constructing a parametric note or dimension it would be helpful to be able to enter dimensions and parameters using a list or graphical method. The dimension and parameter selections would work exactly the same as the tools already available in the "relations" dialoge box.Suggested location for new parameter and dimension selection option boxes. Example legacy "Select Parameter from List" capability in the relations interface.2. Are you using a workaround?Either the user must know how to manually construct a parameter or, they can open the Relations interface, then use the "Insert Parameter Name from List" function there.3. What is the use case for your organization?Parametric notes can help reduce the chances for error as the design develops. Its really easy to type "4X" for a pattern, but that can change with time. It would be helpful if it was easier to construct parametric notes/dimensions to aid in adoption.4. What impact does this problem currently hav
An option should be added to allow users to change and save the default settings in the PDF Export Settings window. It would be nice to be able to change settings such as "Color" to monochrome instead of color or "Fonts" to stroke all fonts instead of use truetype fonts and have that be the default settings. Currently in Creo 2.0 you have to remake these changes every time you open the software.
This topic has not been fixed within the last 25 years so I make another attempt here 😉:When creating a new drawing with the drawing template:You cannot click OK without selecting a 3D model - the button is inactive:There are many use cases where this makes no sense:Import of 2D IGES or DXF data into the drawingA drawing that contains only notes and tablesA user just wants to start a drawing, place the drawing frame but doesn't have the 3D model from his colleague yet.Since using the template is not possible in those scenarios users tend to select "Empty" to activate the OK button. By doing so they don't use our template and therefore don't have any parameters for the drawing frame. This results in Creo asking for a value for every parameter in the drawing frame when you place it thereby overwriting the parameter with simple text making the drawing frame non associative. All because Creo forces you to select a 3D model when creating a drawing from template.Please fix this nuisance onc
If we have provision for saving the Hole Table columns after adding necessary parameters, it can be reused. Now we are in need to add Hole table columns and parameters manually each every time. This is time consuming work.
1. Describe the ProblemOur users prefer to work in Creo in their mother language. This leads to the effect, that the Windchill attribute "PTC_WM_Lifecycle_State" is shown in this local language. But we want to show teh value of this attribute in the drawing always in English language.2. Are you using a workaround?We could use another parameter and create a "translation" operation in 3D relations or drawing program. But this adds possible error possibilities.3. What is the use case for your organization?Our idea is, that there's either a Creo option: E.g. "data_locale" that you can set to define the data locale independent from the application language or there can be a second environment variable next to "lang" e.g. "data_lang" to set the locale there.4. What impact does this problem currently have on your organization?The lifecycle state on our drawing, that should be shown in English language, is shown currently in a different language.Status changed to: ArchivedHello,We are archivin
1. Describe the Problem Company-specific logic added to a UI command using Toolkit function ProCmdBracketFuncAdd can't be removed because there's no corresponding opposite function (as is the case with ProCmdAccessFuncAdd, for example, which has ProCmdAccessFuncRemove as its counterpart).Therefore, you've to resort to a workaround that complicates the program logic of the bracket function. 2. Are you using a workaround?In the bracket function, you've to use conditions to check whether the function should continue to be executed or be aborted.3. What is the use case for your organization?We would like to create a toggle button that allows users to activate (add) and deactivate (remove) a bracket function.4. What impact does this problem currently have on your organization?The absence of a counterpart to ProCmdBracketFuncAdd makes life more difficult for the approximately 10 Toolkit developers in our company.Status changed to: ArchivedHello,We are archiving your idea as part of a general
1. Describe the ProblemCurrently, in the repeat region relations, no drawing parameters or information about the drawing can be references.2. Are you using a workaround?Using parameters stored in the member itself to set flags, rather than automate. Or setting the relations to compare to the string of the drawing number, rather than referencing the drawing number, again, no automation.3. What is the use case for your organization?I need to compare a member parameter to the drawing number to determine sorting and other factors, but that cannot currently be done. It can be done manually, for each drawing, using the workaround, but I want it on the template in a way that works automatically.4. What impact does this problem currently have on your organization?Extra work creating non-parametric data.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announce
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View2. What is the problem?Creo View Clients download link is not visible in the main structure. Bring Clients to the main structure since CV may be used as standalone SW. I want to see it there like CV Adapters and not digging into the WCH PDM structure.3. Are you using a workaround? If yes, please describe it.Have to find it in the download structure.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Optimizing time.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Waste of time during finding files under confusing structure.
1. Describe the Problem During a Creo check-in to Windchill if an item already exists the upload fails with the message "XXXX is not unique". Often this is because a user has downloaded the same vendor STEP file as another user or the user has accidentally assembled CAD from a network drive instead of from the Windchill repository. For our organization, the items that are in Windchill already are exactly the same that a user is trying to check in. There should be an option for "replace with items in Windchill" to make it easier for users to check in the parts without needing to search and add the files to their workspace (remembering to uncheck the "Reuse modified workspace content" box). There should be a drop down option just like there is for the option to remove items from workspace when deleting an item. 2. Are you using a workaround?Yes, searching, adding the items from Windchill to the workspace and remembering to uncheck the "Reuse modified workspace content" box.3. W
1. Describe the ProblemWhile replacing components in assemblies Creo evaluates reference pairing by component interfaces, same name, same history, same parameters, and same ID basis. Creo does not compare references based on geometry. This forces users to make thousands of "no brainer" clicks to reattach references in assemblies form which parts have been replaced.2. Are you using a workaround?Manual clicking of all interfaces is often the only way forward. Sometimes one has to do3. What is the use case for your organization?When creating new versions of components that are used in big or multiple assemblies. When replacing components in assemblies having multiple parent assemblies. When remodeling features for better editability or added features.4. What impact does this problem currently have on your organization?Each user may lose approximately 15 minutes per week without this feature.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This actio
1. Describe the ProblemModeled which have been modified using the "Dimension Boundaries" tool in the analysis tab do not show as a feature. It would be good if ModelCHECK reported that a modification has been made in the model using the Dimension Boundaries tool ("Dim Bounds" in the help)2. Are you using a workaround?Not telling users about the feature is the current work-around. May remove the button from the Analysis Tab.3. What is the use case for your organization?Dimension Boundaries could be useful for mass or tolerance analysis.4. What impact does this problem currently have on your organization?Currently if a model is checked in with the modifications active, then the derivative files maintain those changes, this could lead to downstream users or manufacturing building components to the wrong dimensions. Model/Drawing dimensions show .250+/-.050, but the part is modeled to .300 or .200 because Dimension Boundaries has been used.Status changed to: ArchivedHello,We are archivin
1. Describe the ProblemWhen the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easily be left active in a production model.There should be some visual indication in the model that the dimensions have been altered using the Analysis -> Dimension Boundaries tool (referenced as Dim Bounds in help). An analysis feature in the model tree would be helpful, (This would also be helpful for turning on and off the analysis, or having different analysis scenarios)Also highlighting of the alerted surfaces would also be helpful. One color for more material another for less material. Or, one color for upper boundary, and another for lower boundary.2. Are you using a workaround?Not telling users about the capability.3. What is the use case for your organization?When the Dimension Boundaries feature is used and active, there is currently no indication in the model tree. The risk is that an analysis could easi
1. Describe the ProblemWhen creating an Excel Analysis, there are two buttons, New, and Load. If you do not have an existing worksheet, the process is:NewIt opens an excel sheetSave (saves as xlsx)CloseLoadChange file type filter from .xls to AllLocate, or realize you have no idea where you saved it and start overIt opens the excel sheetPTC has confirmed that this is the expected behavior. But why are these not one step? If you create a new sheet for use in this new analysis (which doesn't already have one), why isn't it loaded immediately? You'll notice that the results of New and Load are the same, the sheet is open. The only difference is the buttons are not enabled after New, only after Load. It feels redundant and confuses people. The IdeaWhen there's no Excel sheet already loaded, and one is created, load it.While you're at it, fix the default file type filter, which is still .xls2. Are you using a workaround?Am I using a workaround? Just following the confusing roundabout proces
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.8.02. What is the problem?Mass tolerance is estimated not calculated- Creo mass does not have the ability to show maximum material condition and minimum- ie max mass and min mass. Creo Parametric's dimension boundary tool does not understand that for the mass to be maximum, the external dimensions must be max and the internal dimensions must be min.3. Are you using a workaround? If yes, please describe it.Estimation4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Would allow all parts to have a Max, Min and nominal mass (and also a mid limit mass- ie for machining of non symmetric tolerances)5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)No-one trusts Creo's mass, this is one iss
1. Describe the ProblemMy idea here is that during Hole Festure user should be able to add more axis if the holes are the same shape2. Are you using a workaround?each hole need to be made separate3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemSince the interface change allowing hatch management (Creo 9).It is no longer possible to create a hatch in a plan and save that hatch to disk (to build a library).This feature was available prior to version 9.This represents a loss of functionality that impacts productivity and information standardization.2. Are you using a workaround?Unfortunately, there is no workaround because it is not possible to save the hatch pattern for reuse or modification.3. What is the use case for your organization?Hatching a section in 2D or 3D.4. What impact does this problem currently have on your organization?The generated documents do not comply with company conventions. The documents are therefore non-compliant.
Measurements should be capable of being captured in a way that includes the effect of explode state. Currently measuring between entities produces results that only refer back to the non-exploded location of components. It would be helpful for basic service procedure verification activitites if the measurements could be made on the exploded states in the 3D model rather than having to go to a drawing to take these measurements.
1. Describe the Problem In an effort to streamline library creation and ecad_hint.map updates, we would like to request that Creo has a config option for the default ECAD_PART_TYPE value. This way, if the parameter is missing in the library, or the hint file, we can control the default behavior. Currently, Creo treats the default as a mechanical part. However, 99.9% of the library components that are created as electrical. 2. Are you using a workaround?Adding the parameter into each new library part. 3. What is the use case for your organization?We have massive libraries that leverage ECAD MCAD collaboration. Having more control over the behavior is ideal and can help streamline the library creation process.4. What impact does this problem currently have on your organization?Extra effort to generate library models and maintain the hint file.
1. What product and version are you running? Creo View 12.1 2. What is the problem? It's not possible today to specify default preferences that are loaded each time a Creo View session is started, but can still be changed during the session. Administrative preferences can be specified, but if a user changes them, the changes are saved in the user-specific user_prefs.xml.As a result, the user preferences take effect in a new Creo View session and no longer the default preferences. Furthermore, preferences can also be administratively locked.But then a user can no longer adjust the corresponding preferences during the session. For more information, see also the Help Center chapter "Overview of Creo View Preferences". 3. Are you using a workaround? If yes, please describe it. There is no workaround in use or known.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. &n
1. Describe the ProblemAt the moment there is no possibility to control assembly features like welding features or assembly cuts by simplified representations.2. Are you using a workaround?For the welding topic we suppress at the moment all the welding features in the assembly to rise up the performance and before we release the assembly we have to unsupress them. For the assembly features like assembly cuts we don`t have a solution to exclude them at the moment from the drawings to reduce the file size by creating a dxf file. We recommend to the users to create no dxf formats. But we would need them. We have drawings which the dxf file has a size of 2,8 GB. Nobody can work with or handle such a dxf file in other tools.3. What is the use case for your organization?We are using the welding tool and creating not welding parts, we are creating only welding features. The same if we create assembly features as assembly cuts. We want to controll this assembly features by simplified represent
1. Describe the ProblemIf in an assembly one component is hidden, it is automatically excluded if, within a part, an external shrinkwrap feature of the assembly itself has created.From my standpoint it is a “silly” expected behavior because linking the behavior to a view state like hide/unhide is dangerous: you can have features related to shrinkwrap surfaces that temporarily disappear and hence the children features will fail regeneration (for instance a piping start point related to a shrinkwrap surface).This behavior is always active, also if shrinkwrap feature has been configured to “Autocollect all solid surfaces”. If the option says this, it means that ALL solid surfaces should be included in the shrinkwrap, also the hidden ones.2. Are you using a workaround?Yes, using a mapkey to unhide all components before generating the shrinkwrap.3. What is the use case for your organization?We use solid shrinkwrap to avoid assembly features when generating a machined welded assembly. We cre
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Schematics 12 2. What is the problem?The Find tool can dig deep into the parameters, but it can't simply do a flat search on a sheet like the Find tool in a Word or PDF document. In the example below, I'd like it to highlight both instances of text on the sheet without needing to know what the parameters are driving them.3. Are you using a workaround? If yes, please describe it.No4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.It would allow basic searching on sheets without needing to know the parameters the text could be buried in.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Helps find things faster across sheets.
1. Describe the Problem Reference: Ticket - 17405204 Article - CS421194 The New Creo Mapkey UI has some room for improvement: It defaults to showing all of the Admin Mapkeys first. We have hundreds of Admin mapkeys that 'flood' the list and make it hard for the user to manage their personal mapkeys. If a regular user wants to manage their mapkeys, they shouldn't have to scroll all of the way to the bottom or collapse every time they go into the menu. With the old method, where the mapkeys were stored in the config.pro, you were able to see syntax errors with mapkeys. Specifically, if there were lines in a mapkey that didn't end in a semicolon, then all following lines would show as an error in the config menu. Having some indication in the new UI that there are broken mapkey lines would be helpful when developing and debugging mapkeys. 2. Are you using a workaround?Collapsing or scrolling each time I needed to edit a personal mapkey.3. What is the use case for
1. Describe the Problem SPR 14980355 introducted a "Select a certificate" popup that prompts users to choose a client certificate to send to the server for authentication. The popup appears every time Creo Parametric is started. In our case, there is only one certificate available, so the popup does not provide any functional use and is purely an annoyance for the user. 2. Are you using a workaround?No.3. What is the use case for your organization?If there is only one client certificate, the popup should be bypassed and the client certifcate should be sent to the server.4. What impact does this problem currently have on your organization?The popup causes a delay in Creo start-up, and is a poor user experience.
1. Describe the Problemwhen creating hole, using "from feature" option on point which created on "non parallel" surfaces the hole keeps original orientation which leads to wrong result ( from user perspective ). the user expect the hole to be perpendicular to each of the surfaces 2. Are you using a workaround?in some cases, limited, using the option copy->paste ( advance ) solve the issue. in most case it isn't3. What is the use case for your organization?general design activity4. What impact does this problem currently have on your organization?loss of productivity
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.