Recently active
1. Describe the ProblemCurrently in Creo Parametric, the Reference Viewer (Edit References dialog) only allows users to view and edit Assembly References; it does not allow editing the Component ReferencesThis means that when a user wants to change the references a component is constrained to, they must open Edit Definition for each part individually, locate the relevant constraint(s), and manually replace the references one at a time. 2. Are you using a workaround?The current workaround is to use the Edit Definition dialog for each component individually, manually rerouting its placement (Component) references through the Placement tab. While functional, this method is extremely time-consuming when working with large assemblies and does not support bulk editing.3. What is the use case for your organization?Allowing both Assembly References and Component References to be edited in the Reference Viewer would enable bulk editing of placement constraints, allowing users t
1. Describe the ProblemWe cannot select Datum Tag / Datum feature using API available(ProSelect()) in Creo Parametric through Toolkit. This behavior is similar for Part as well as drawing module.Please refer to the article https://www.ptc.com/en/support/article/CS320500?source=search&as=0 2. Are you using a workaround?No3. What is the use case for your organization?We want to select the Datum tag / Datum Feature through UI, and get its selection pointer to get its PMI information.4. What impact does this problem currently have on your organization?Not able to get select Datum Tag / Datum feature annotation while customization.
1. Describe the Problem There's no quick way to summarize the Creo warning or error messages that occur during a regen. This problem gets multiplied when regenerating large assemblies which may generate 1000s of message lines during regeneration. Current Problems: Regen warnings and errors stream by the message area quickly and are very easy to miss or ignore. Finding Message Log button or opening the Trail file in a text editor (ex: Notepad, Notepad++) to see all previous messages is not something that most new users know about. It's difficult to find where the last regen started on large assemblies in the Message Log or Trail file. There often are a TON duplicate warning or error messages. Many warning or error messages are hard to understand and often don't include the name(s) of the related model(s). Some messages that should be warnings or errors are not identified as such. Here's an example of the problems: Possible Solution: 2. Are you using a workaround
1. What version of the software are you running?We are currently using Creo 7 and update to Creo 11 in August (Tests in Creo 11 have not shown any improvement)2. What is the problem?When a User Defined Feature (UDF) is updated (e.g. modified geometry, parameters, relations), the changes are not automatically reflected in models where the UDF has been previously inserted.As a result, designers must manually remove and reinsert the UDF in each affected part.This process:Is time-consuming.Breaks references in assemblies or downstream applications (e.g. CAM, metrology).Causes inconsistency in feature definitions across models.3. Are you using a workaround? If yes, please describe it.Yes, the only workaround is to manually delete and reinsert the UDF in every affected model.This approach:Requires manual redefinition of all references.Often leads to broken links in assemblies and drawings.Is error-prone and inefficient, especially when many parts use the same UDF.4. What is th
1. Describe the ProblemToday when you receive a Windchill Event Management notification you get the red circle with the white line icon in the bottom of your Creo Parametric window. The error will show in the logging, but that only helps if it's the last error line. By clicking the icon you can get to the Event manager window, which then you have to often click the triangle or circle icons to figure out exactly why something failed. The new-ish notification center allows for a small pop up notification along with controls to determine what items are flagged and which ones pop up. It would be beneficial if something similar happened for Windchill Events. The Notification Center server settings don't seem to capture things like upload failures which can be critical depending on your system setup. Another option is to combine these two notifications into a single more powerful notification window allowing the small pop up banner windows with the options to fade or st
When trying to transfer many features from one component to another component with paste special, an error occurs because wrong references was selected. But I don't want to cancel the "paste special" now, because I know the rest fits.In addition, the error is not in the failed feature "chamfer" but often one featuer before it. In this case, the error is in the points feature, but I can't get to it to fix it without losing everything else. very unfortunate.Creo Parametric 7.0.11.0
1. Describe the ProblemThere is a round feature containing multiple fullround items. Modify the model so that one or more of those child items no longer exist. Creo detects failed round as expected. Remove the failed ones and update. Some times Creo change the attachment option of rest of the items to surface with out user attention. This cause model to fail elsewhere. There is no warning but this happens automatically.2. Are you using a workaround?Workaround/fix is to go back and change the attachment back to solid, there were even no reason why it did change without user interaction in first place?3. What is the use case for your organization?Hmm. Use case would be a functional software not produce failures by itself.4. What impact does this problem currently have on your organization?Sometimes happened can be hard to detect as the system does not recognize it to failure anymore as it was fixed. With large model it can be really hard to pick the problem by your eye only. You can easi
2025.04.01PTC コミュニティへの提案 2025.02.10の貴方からのメールを受取り再度、技術的な疑問点についてチャレンジしたく本投稿をします 再投稿の内容については、機械系の規格関係の物であります具体的には、ねじの締結問題に絞りたいと思います。 例えば、日本国内では大型トラック・バスの車輪脱落事故は未だに解決されているとは云えない状況であると思います。 そこで、この状況を解決するためには、先ず、ホイールの取付方法と、ホイールを締結する方法の分析から始める必要があると考えた次第です。 但し、大型トラック・バスのホイール取付方式はISO規格に準拠しているので、今回はねじの締結問題だけに絞ります。 ねじの締結基準について Junkerの表と米谷レポートの概要説明 ・Junkerの表(ねじのゆるみ係数=締付け長さ/ボルト径:実験的に求めた表) 参考資料は添付資料1に示す ・米谷レポート(ねじ締結と摩擦係数の関係を実験的に求めたレポート) 参考資料は添付資料2に示す、 但し以下に概要説明のみ示す米谷実験とJunkerの表との統合一見、何の関係も見られない摩擦係数とJunkerの緩み係数L(ℓ/d )との関係とを同じグラフ上に表現する そこで、米谷の実験結果のグラフの横軸は軸力であり、縦軸は摩擦係数である一方、Junkerの表の(ℓf/d)はボルトサイズの標準化(ボルトサイズ無関係化)で(ℓf/d)値はボルトの伸び及び変異と同様である尚、米谷の実験結果は鉄鋼材料にも展開可能と仮定することでそこで、米谷の実験結果:図12の摩擦係数とJunkerの表との合体が可能になる 即ち、図12に新しく(ℓf/d)の横軸を設定することが可能になるこの手順で、摩擦係数とJunkersテーブルを統合するものですこの統合された図12のグラフから、Junkerの表の意味することが判明する 即ち、参照実験値から、論理的な繋がりが判明されていると思います。 3.私の最終目標:誰でもが安心して使用できるボルト締結マニュアルの作成 私が今迄、調査した範囲内ではJunkersの表が最も納得のいくものでした 但し、この表について、論理的な説明がないことを残念に思っていました そこで、論理的な私見を試みた訳ですが、更なるボルト締結の技術経験者は
1. Describe the ProblemI would like to make a request for ICE/Windchill enhancement, please. The "Set New Name" dialog box does not have an "Apply" button. I would like to have an "Apply" button added to aid in renaming (or save-as) "Set New Name" dialog to keep from opening, renaming, OK (closing,) and reopening the dialog to apply different names to different files multiple times. If I could "Apply" I could change multiple files with different criteria without the OK and reopening, which would save time. Thanks!2. Are you using a workaround?Yes, so far just doing the standard opening, renaming, OK (closing,). Then reopening the dialog to apply different names to different files multiple times.3. What is the use case for your organization?It would really save time and make things easier for the people in my organization,4. What impact does this problem currently have on your organization?Without this enhancement our organization can't get our work done quicker at times when there's mu
1. Describe the Problem I'm bringing this idea back to life! Previous idea - https://community.ptc.com/t5/Creo-Parametric-Ideas/Allow-column-settings-to-be-saved-in-Simplified-Rep-dialog-box/idi-p/454844 The entire Creo Parametric interface has been updated to make settings sticky for the users with the tree.cfg being obsoleted. The columns in the simplified rep ui have yet to be included. Please vote for this idea to get the columns to be sticky after the user applies it. 2. Are you using a workaround?A mapkey can be created to enable the user to turn on the column but this works very flaky because the mapkey can only randomly select the row in the model tree columns. You can see in my picture above that if I run the mapkyey twice, it added "model size" which don't want! and the user has to remember to run this every time Creo is launched or use 6 button clicks to turn it on.3. What is the use case for your organiz
1. Describe the ProblemI would like a feature to display the stress amplitude calculated from multiple load sets in a fringe diagram. I assume that it is calculated internally during fatigue analysis, so I expect it to be relatively easy to implement. (The case number is C17848775.)2. Are you using a workaround?I bought FENFAT and created a program. https://femfat.magna.com/3. What is the use case for your organization?It is necessary when evaluating fatigue strength using static analysis.4. What impact does this problem currently have on your organization?I have 100 customers who are likely to use it.
1. Describe the ProblemWhile creating a part with Model Based Definition utilizing semantic references, when we select an annotation, the edges and related surfaces highlight, but in a way that’s hard to distinguish edges/surfaces. When we select “Semantic Query” the highlights are much more obvious and useful. Looking for a method or setting for making the “Semantic Query”-style highlight for annotations the default behavior (without having to click semantic query first). Snapshots of the current behavior and desired behavior when selecting annotations that contain semantic references below. Current behavior upon annotation selection: Desired behavior upon annotation selection: (Note: image above shown utilizing semantic query, desire is for that step to not be necessary)2. Are you using a workaround?Semantic Highlight button3. What is the use case for your organization?This enhancement will make MBD (Model Based Definition) much easier to con
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 7.0.8.02. What is the problem?In most cases, NASA users need up to date mass properties on our parts, including family table parts. Our users frequently fail to Calculate mass properties in the Model Properties. We need to be able to use Modelcheck to flag this condition.3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If Modelcheck had a check for this, then users could be alerted that the mass properties of their parts are out of date, so that they could be advised or required to fix it before checking in to Windchill5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Redefine (and not DELETE and RECREATE) a master rep general view and CONVERT it in a simplified rep view for a PART drawing.
1. Describe the ProblemThis is a request to update angular views behavior in the drawing mode, so they behave the same way as combined views with dimensions normal to the screen. See video attached for reference. When isometric (angular) combined view is placed on the drawing in Creo 11.0.4.0, annotations are not displayed automatically. That causes designers to create same dimensions twice.2. Are you using a workaround?Yes - showing annotations manually on the drawing.3. What is the use case for your organization?Create 3D models with all PMIs defined in combined views, and then - deriving the drawing just by placing combined views on a drawing.4. What impact does this problem currently have on your organization?Dozen of work hours per month lost, potentially more in the future.
1. Describe the ProblemI often find myself plucking through lists of references that have been lost, one by one, to delete the broken ones. There should be some "remove all red". Example: you put a large set of fillets on various edges on a 3D solid. Then you edit the base model such that some of those edges disappear. The Round feature needs fixing, so you Edit it and find yourself with a table where some of the selected edges are marked red, because the do not exist anymore. There you have to select a row and right-click to get a Delete operation - for each, one at a time since you cannot select more than one - and there can be a dozen. In other dialogues, you have to select the row and click a separate button instead, which is marginally better. Sometimes you can select more than one row and delete several in one operation, which is an improvement. Sometimes though, you can select multiple rows but when you attempt to delete them all you find that you only deleted the
1. Describe the ProblemCurrently, hyperlinks can be assigned to 'stand-alone' notes in parts and assemblies. Hyperlinks can't be assigned to text or to cells in tables in parts or assemblies. 2. Are you using a workaround?No3. What is the use case for your organization?Note text in a table used for MBD for parts and assemblies should be able to utilize hyperlinks just like 'Unattached', 'On Item', and 'Leader' Note(s).4. What impact does this problem currently have on your organization?Lack of a more productive way to present information and uniformly display data for parts & assemblies
1. Describe the ProblemI would like to have a color management system in Creo Parametric. This would be similar to simp-reps and styles. I'm not aware of a tool to save different surface/component colors and quick switch back and forth. 2. Are you using a workaround?Just living with having to choose one set of colors or another.3. What is the use case for your organization?The main function would be to be able to save different color configurations for a part and assembly. One use case is that when engineering its nice to have contracting colors from component to component, but when presenting a product to customers its nice to have the design have surface colors which represent the final product. This would also have applications in communicating design functions such as identifying machined surfaces, or components with different material properties. A simple Color Manager would be a nice addition, and then advan
1. Describe the ProblemCurrently there's no direct API available to remove a section of 2D view. Please implement ProToolkit & Object Toolkit APIs to remove a section of view.2. Are you using a workaround?Yes - Using macro.3. What is the use case for your organization?We would like to update a drawing using customized Toolkit Application. We need to update sections as per user inputs. In such case we couldn't able to update the view because of API unavailability .4. What impact does this problem currently have on your organization?Minimal impact as we have workaround. But to improve the robustness of application the direct API calls are preferable.
Add the option "Save Copy and Open" to Save a Copy for parts, similar to the same operation with an assembly. This would prevent making changes to the original part when the new copy is the one that needs modified. Most programs automatically open the new file when a Save As is performed, Creo should work the same.
As seen in a previous post, there is the lack of parametric way to scale objects. We can use an option to globally scale a part, in a non parametric way, or we could use the warp features to scale in a parametric way, but which could distort the surfaces of a model, and which does not allow to parametrically scale sketches with imported geometry, or sketches that have splines with non-dimensioned nodes. I suggest that the "Move / Copy" general transformation tools, which currently only allow to move or rotate objects, that there should be added the option to also Scale objects, and that would also let to (move, rotate, or) scale skeches (Giving a copy of an original sketch, with the geometry scaled up or down), after picking a scale center. Also, there should be the option to make some general transformations, using a source coordsys and a target coordsys. Please see the attached image:
We should not have to enter alt codes which are non-intuitive, must be memorized (or slow), and unstable (often font dependent): ≤ "less than or equal to" ≥ "greater than or equal to" And less commonly: ≠ "Not equal to" ≈ "Approximately" Greek Letters Perhaps a good way to handle this is by opening MS Word and looking at the symbols used there and how they are organized and mimic use that as your starting point. Folks, please add whatever characters to the comments below that you would like to see that I haven't mentioned here. Add Here in Creo. Could even have extended menu options.
When configuring ModelCHECK, some list values allow for wildcards / placeholders like: * — Any number of characters ? — One character (numerical, alphabetical, or symbol) # — One numerical character $ — One string character but these cannot be used when checking for unwanted layers: PRT_LAYER_UNWANTED [layer]ASM_LAYER_UNWANTED [layer]DRW_LAYER_UNWANTED [layer] Allowing to use placeholders like # in the check file would make ModelCHECK much more aligned with itself and be useful because the admin would not need to explicitly list all possible layer names that are not allowed. This should also be allowed for other unwanted... checks and when using external list files for them.
When a datum plane lose his geometry reference, Creo doesn't highligth the problem. Creo just keep the datum plane as a "dead geometry". Nota : I use Creo 7.0.2 For me it is an important problem because, often, when I make modification in my 3D model I remove some geometry. Recently, I discovered in a prototype that a clip didn't have the good localisation because the plane who pilots his localisation isn't up to date because of this problem. For example, in the case of the image above, you can see that the datum plane "debut_guidage" (I'm french) seems to be normal but when you open the editor of this function, you can see that the reference is consummed. It is real, the reference is consummed by the function "Enlevement 4" but as you can see Creo doesn't warn us about the problem. I called the PTC assistance, they didn't find a way to answer to this problematic and they suggested me to make a proposition here. Nota : I observe that the function Round also
It would be useful to make bodies a category when defining component flexibility in a part model. Currently you can add features so you have to create a delete body feature, and add that feature to the flexibility on the part when used in an assembly. The results in a confusing logic of suppressing that feature to show the body, and resuming the feature to hide the body.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.