Recently active
Gentlemen,Especially Stuart Bruff Richard Jackson Valery Ochkov & Vladimir NosovI have noticed lots of activity from this user cost_economic.xmcd any issues with his posts, are they all on point?Thank you,Toby
Nice work.
The shortcut menu and the ability to customize it is a really great addition to Creo 4.It would be good if you could customize Creo 4 such that when you left-click on the feature in a model tree, you can see the "Relations" button in the shortcut menu, which when clicked, would open the relations of that feature:The problem with the current functionality is that the "Relations" command opens the part relations dialog box - which makes it less of a shortcut
I made the first one you uploaded, even though it wasn't the right one. I made it by warping a circular surface as shown below. Very easy to make. Now, on to the next one.
Part of the answer is in one of your posts, where it states that the shell elements could not be created, therefore, you have gaps and gaps produce disturbances in the continuity. Those areas where the elements converge to a V-shape is almost like a crack initiation site, and that's why the stresses are unrealistic. It's just errors in modeling the solution domain for the physical system that have produced these types of results.
Go to the built-in Help Center and read up on welds if you haven't already (snippet shown below).
It looks like Edge Quality for Real Time Render does not depend on Creo settings.(Real Time Render) poor edge quality(Shading With Reflections) correctMy settings
I thought with Creo 4.0 we were getting a new surfacing interface update for manufacturing or am I mistaken ? It still has the same old pull down menus dating back to 2000.
Table below reflects latest information up to Creo 2.0 M180 and Creo 3.0 M060Data Exchange Versions Support (Rev C3.7)FormatCreo Elements/Pro 5.0Creo 1.0Creo 2.0Creo 3.0 ImportExportImportExportImportExportImportExportAutocad DXFUp to 200712 - 14 2000, 2004, 2007Up to 201012 - 14 2000, 2004, 2007, 2010Up to 201012 - 14 2000, 2004, 2007, 2010Up to 201312 - 14 2000, 2004, 2007, 2010, 2013Audocad DrawingUp to 200714, 2000, 2004, 2007Up to 201014, 2000, 2004, 2007, 2010Up to 201014, 2000, 2004, 2007, 2010Up to 201314 2000, 2004, 2007, 2010, 2013CADDS 5R14, R15R14, R15R14, R15R14, R15R14, R15R14, R15R14, R15R14, R15CATIA V44.1.6 - 4.2.54.1.94.1.6 - 4.2.54.1.94.1.6 - 4.2.54.1.9Up to 4.2.54.1.9CATIA V5R10 - R18 - R19 (M020) - R20 (M080)R16 - R18 - R19 (M020)R10 - R20R16 - R20R10 - R20 - R21(M10) - V5 6R2012-2013 (M080) - V5 6R2014 (M120)R16 - R20 - R21 (M010) - V5 6R2012 (M080)R10 - R22 - V5 6R2012 - 2013 V5 6R2014 (M030)R16 - R22 V5 6R2012Creo Elements /DirectN/SN/SUp to 18.1N/SUp to 18.1N/S
BH OOI,Downloaded the file, and posted image. I will take a look at it tomorrow on how to make it. Some else may have a solution for you by then.
Which leads me to some more questions. If you already have a 3D model, why do you want another one? Do you want to have it in Creo so you can edit/modify it?
Just noticed that ptccommunity.com redirects to http://www.tristar.com/blog/. They did a nice job in procuring a domain that closely reflects the name of the communityRegardsBinesh KumarMedtronic - MITG
I am unable to do anything in Parametric 4.0. Installation showed successful and I am able to start the app and create a new part file with no issues. However when I try to do anything (create a plane, extrude a feature, etc) Parametric shuts down. For the Extrude feature, the ribbon updates to show the extrude options but as soon as I select a sketch plane and try to define an internal sketch, this is when it crashes. I am not able to get the sketcher window to open. When creating a plane, it shuts down as soon as I select a reference. I tried importing a stp file and this was successful but I couldn't do anything afterwards. When I open up an existing prt file, it crashes during the opening process....never fully opens. Things I have tried:ReinstallationChanged the "Start in" folder on the shortcut to a new folder.I have Creo 2 & 3 installed.Std.err is showing the following: pm_is_portmapper_port_busy: bind failed, error = 10013 pm_is_por
Just curious. What is that surface used for in the real world?
Are you interested in the stresses in the weld?
Here is a high level overview of CSPM Roadmap candidates. This was presented at the Board of Customer Advisers meeting at Liveworx 2016.
When started, I am getting following errorOS/Machine Details
Hi all, when I try to create and place a general view in drawing mode, Creo Parametric 4.0 exits automatically , I don't know whether this is a bug or not, can this issue be reproduced on your machine? Thank you.
Creo crashed with a Fatal error while editing the appearances.
Today i had another session of Creo 4 crash when i tried to add a GD&T in the 3D model - specifically when i tried to show the axis datum while selecting the reference for the tolerance.Refer to the attached traceback.
Good evening:We are working with MBD models and we faced the problem of the annotations of axes in the combined states. We created a combined state, and put the axes with the command Show Annotations and this is the result in Creo/Parametric4.0 beta, the three axes appear in the graphical area and in the details tree: Then we export to Creo/View with File > Save a Copy as .pvz, but the result is different. The axes and their labels are not shown.Creo/View does not consider the axes as annotations. In Preferences we can choose in the filter if the axes are shown or not:But this option has effect over all the axes in the combined state, not only over the three axes shown in the combined state:We are not able to achieve the same visual result in Creo/Parametric and in Creo/View and this causes a big problem for the use of MBD in our workers and partners.Is there any solution for this? Is PTC improving his software to achieve a total correspondence between the annotations from Creo/Para
Garrett,Difficult to determine based upon the fringe plot. It appears that you have gaps between shell elements, and I circled these two region in the below image. Can you upload an image of this same area before meshing?
I thought I saw the mirror was finally fixed in Creo 4 so that it was possible to add/remove features without having to delete the entire mirror feature. Am I confused or am I just doing something wrong?
I had problems when mirroring cylindrical component in assembly.When "reuse selected component" evrything works fine.But when "Perform symmetry analysis" is selected on completion of mirror both parts disappear. When memory is cleaned and assembly reopened I get mush like on last pic.
justme / Frank Defilippi : First really showed up with some vague complaints and then launched this: Swx to Creo back to SWXOne thing that didn't make sense was his lack of Community questions about using Creo, but I can see what he wanted from the start, weeks before he joined the Community. It's interesting that he didn't post much over there either.Convincing company to switch CAD systems | SOLIDWORKS Forums forum.solidworks.com/thread/113422His post, as of April 6th "I've been at this for 8-1/2 weeks and it took 3 weeks to model a single part (small block)."But this post, from March 31, tells it all: EPDM and PTC-Creo tie in | SOLIDWORKS Forums forum.solidworks.com/thread/113422"My whole evil plan is to bring EPDM here and then suggest converting over SW."Allowing for a certain amount of hyperbole, there seems like something wrong with this guy's story. Charitable guess is that he is incapable of learning anything new, even if he's had a decent career so far. Less charitable
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.