Recently active
Redro,In order to make the attached model into a flat pattern, the model must have uniform thickness. I checked the thickness of the .stp file, and there are different thicknesses, even though slightly different. I tried to convert this to a flat pattern in sheet metal mode, but I was not able too, as shown below.
Corey,If you want a mirror of the part, all you have to do is what's shown below:
Gavin,I've attached your part as a new mirrored part, with features.
Gavin,I didn't have any problems with the mirror function, as shown below. Can you share your model?
Matthew,I've never encounted the parametric.exe not installing. I know you've already heard this, but I would completely uninstall Creo, create a new install directory, and reinstall Creo in a new directory.
This will work, but you have to do it for each component, then a summation of all the voids.
I'm not having any problems saving in Creo 3.
If you're performing a lug analysis, you could use the hand calculation method that I've attached.
Paul,See if this helps. This example has a curved plane whereas your's has a flat plane.
Copy geometry doesn't work either, as shown below.
Corey,This is why I submitted a Product Idea some time ago, to give the end user more capability for mirroring. You may see the Product Idea in the attached link.https://www.ptcusercommunity.com/ideas/3815
If you're saving just a part to mirror, then PTC has made it easy by just doing Save As > Mirror Part (as shown below). There is no need to select a plane.
I'm currently running creo 2 and creo 3 on the same pc.
Ramon,You can hide the lines under Drawing View properties. LMB the section drawing, then RMB and select Properties and the Drawing View dialog window will appear as shown below. Select View Display and Display Style the No Hidden. See if this will help.
It should come up in IE as shown below.
Try launching the Help Center from the Start Menu.
Kishore,There is a difference between the Help Center and the online eSupport. The Help Center is installed on your hard drive. If you want thet PTC eSupport, you will have to create an account from the eSupport web page.
Community,Does anyone have Creo Parametric 3 on a Dell Precision M3800 with (3840x2160) 4K2K? If so, how does it perform? BTW, that's AutoCAD in the image.
Eric,Thanks for the input. But the topic has actually changed to the new Dell 7710 (replacing the M6800, I even called Dell about it). I'm certainly not going to purchase the M3800. No way. I'm going for the Dell 7710, and I posted a video on it in this discussion.
Anurag,Is the uploaded file giving you the "problems"? Can you show what you're trying to create? I opened your file, as shown below.
FYI
However, this document has the Creo 3 hardware notes, which supports Windows 10.
What OS did you get with your Dell 7710? On page 6 in the attached pdf, the 7710 was certified this month for only Windows 7.
Charles,Here is a YouTube video on Fatigue Advisor:https://www.youtube.com/watch?v=kcfmxsO0vcU
Thanks Christopher. I would change the topic of this discussion to just Dell computers with 4K monitors, but I can't edit it. Anyway, I was at a Pro|E users group last week, and someone was sitting in front of me with a Dell M3800 with a 1920x1080 display. I first asked him if it had the 3840x2160 display, and he stated that if he had that much resolution, it would be extremely difficult to read the text in Creo, as he said it was hard enough to read it at 1920x1080 on a 15.6" display. So I'm beginning to think do I really want the much resolution on a 15.6" display (laptop)? Of course I can always change the resolution if needed, and I can purchase a M4800 with a docking station and use a larger monitor in an office.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.