Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Need solution to rename the Figure while Duplicating the Figures. Also, no shortcut for renameAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?We are using Creo Illustrate 8.1, 9.1, 10.1 & 11.0 2. What is the problem?Users are experiencing limitations in renaming figures during duplication processes. The current workflow requires renaming of each figures after they are duplicated, which is time-consuming and prone to errors. Additionally, the absence of a dedicated shortcut for renaming further hinders efficiency and convenience3. Are you using a workaround? If yes, please describe it.We don't have a workaround, but we follow these 2 step process1, Duplicate Figure 2, Rename Figure4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We create numerous figures in Creo Illustrate and often rename them based on corresponding images. If users fail to rename figures immediately after duplicating them, it can become challenging to do so later. We suggest a solution that allows users to change the name of a new figure as soon as it's created, similar to how you rename files in Windows Explorer5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Renaming each duplicated figure as a second step is time-consuming, especially for large projects with numerous figures. Additionally, if users fail to rename figures immediately after duplicating them, they must revisit the image to assign a proper name, which can be a productivity issue.

Creo View Needs More Symbols for Mark-upsAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1 MCAD and ECAD2. What is the problem?Creo View (CV) currently does not offer enough symbols for 3D mark-ups.Reference Creo View Markup needs to include engineering symb... - PTC Community.Other than just text for Notes, CV does offer GD&T mark-ups.  PTC's response to the Community post said that, to offer more symbols, it would require "major product improvement."  Since GD&T is already available, and since Creo Parametric already offers a full array of 3D annotation symbols, I would not think that this improvement would be major.3. Are you using a workaround? If yes, please describe it.No.  The only workarounds that I can think of would be too laborious (using special character text codes) or too messy and problematic due to another Creo View weakness (freehand drawing, but then it stays in all Viewable states.  Ref. Article - CS374272 - Is it possible to make markups as part of combined states in Creo View (ptc.com) and I thought there was a Community idea submission, too, but I can't find it.).4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.To apply 3D mark-ups in CV, the technical community needs to be able to apply technical mark-ups, such as what the other post suggests:  weld symbols, diameter symbol, surface finish symbol, etc.  Example usage is during a design review, needing to apply "redlines."5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Lack of this capability is one of many hindrances to our organization, and the entire industry, which makes it much harder to adopt a truly 3D Model-Based Definition/Enterprise across the entire life cycle, from design through operations and maintenance.

Better Control Over 3D Annotation Locations in Creo IllustrateAcknowledged

Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 8.1.0.02. What is the problem?Adding annotations in Creo Illustrate lacks the fine control that Parametric has. Annotations may appear correct when initially authored, but moving the camera reveals that they are way out of position. When the model has a large bounding box, it is common for these annotations to be way out in space relative to the model, since the z-positioning isn't really controllable when moving an annotation around the screen. 3. Are you using a workaround? If yes, please describe it.The only workaround is to spend a lot of time tediously moving annotations around with different camera positions until a satisfactory location is found. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Reworking how annotations are positioned and offering something akin to annotation planes would help improve this situation greatly.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Since the workaround above is impractical to do at scale, no one actually does this. Instead, we have to just accept that annotations will only look right from one angle, and be flying off into space if navigating the model freely.

Allow Automatic Figure Numbering to Enable Smoother ReorderingAcknowledged

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a manufacturing engineer at a high tech equipment manufacturer. My illustrations are used by technicians to guide assembly.2. What product and version are you currently running?Illustrate 7.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When we create an illustration, often we discover after structuring the sBOM and generating the majority of the figures that a new figure needs to be inserted in the middle of the illustration. To keep figure numbers correct and keep the "folders" of items we create in sBOM accurate we have to manually update the name of each figure and each manually create sBOM folder to reflect the new numbering scheme.4. What is the use case for your organization?If we had a feature that allowed linking of figures with sBOM folders in addition to automatic renumbering based on figure order, then adding a new figure in the middle of the illustration would be as easy as selecting the place you want the new figure and creating the figure. The numbering of the sBOM folders and figures would automatically adjust.5. What business value would your suggestion represent for your organization?This would save us likely 30 minutes or more per large illustration since reordering and renumbering is currently so tedious.

Illustrate LMC and MMC Geometric Condition Based on TolerancesAcknowledged

1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Not relevant to the subject idea2. What version of Creo Parametric are you currently running?Not relevant to the subject idea3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We have seen this specified as a contract deliverable requirement for defense contracts.  There is currently no way to geometrically represent the LMC or MMC in Creo Parametric.  The LMC and MMC states could be represented by transparent overlays or by separate representations.  The nominal dimension must not be changed in order to illustrate the LMC or MMC state.4. What is the use case for your organization?In order to support design reviews and detailing using Model Based Definition, Creo Parametric should be able to illustrate LMC (lease material condition) and MMC (max material condition) based on defined dimensional tolerances.  A default tolerance parameter could optionally be supplied by the user.5. What business value would your suggestion represent for your organization?Benefits of implementing this suggestion include:Substantial errors in tolerancing can be easily verified by visible review.Minor errors in tolerancing can be identified by a subsequent interference analysis.Model Based Definition requirements to illustrate LMC or MMC state can be supported.If used during a design review, costly errors may be avoided prior to manufacturing.Allows for simple determination of tolerance issues in assemblies prior to more detailed subsequent statistical tolerance analysis.