Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Creo Hole NoteArchived

Hi, I've been living with this for a long time and I have to beleive there is a way to make it happen. I would like to show my hole notes, and I would like the arrow to attach to the edge of the hole, but point to the center of the hole. If I create the hole in different ways, I get different results. If I create the hole with the hole tool, and use the drag handles to locate my hole, when I place the hole note in the drawing, the hole note is placed on the edge of the hole, however it does not point to the center of the hole. In this case I end up re-attaching it, and it is still not perfect. If I create the hole by first sketching a point, and then creating the hole on the point, when I place the hole note in the drawing, the hole not is place on the center of the hole. In this case, I once again re-attach the note and it is still not perfect. This is my preferred way of creating holes because I am usually creating a hole pattern on sketched points. I have found that regardless of how I create the hole, there is a work around. I show the hole note, and then I copy the note from the properties box. Then I create an old fashion note, choose normal as the attachment type, and past the hole note text in my note. This works, it is a pain, and there has got to be a way for Creo to do some of these simple things better. Also, this method limits my ability to drag the note around. It would be nice if it just worked, but I would settle if I could just edit the hole note attachement to be normal. It doesn't give me that option.

Conflicts dialog box (checkout on the fly) when objects are changed: allow default value "Read Only" to prevent unwanted workspace modification of objects caused by ASM retrievalArchived

Current situationThe config.pro option "dm_checkout_on_the_fly" controls the following (from PTC description):"Controls the default action presented to the user when Check Out on the fly dialog comes up"This option does not list all new available choices for the Conflict dialog box.Available choices for the config.pro option "dm_checkout_on_the_fly" at the moment:checkout*continueAvailable choices in Conflict dialog (see screenshot below, click to enlarge):ContinueCheckout out nowRevise and Check out nowMake Read-only(in some cases: Check out entire family table)(in some cases: Revise and Check Out Entire Family)Available choices in Conflict dialog (see screenshot below, click to enlarge)What should be doneAdd the following config.pro option value to "dm_checkout_on_the_fly":"Make Read-only" - suggestion for option value: "read_only"Why this should be done?The option value "Read only" would prevent unwanted changes of objects that the user is not allowed to change, see the following use case.Use caseUser opens assemblyAssembly is regenerated during retrievalConflict dialog comes up as regeneration changes objects:The default action can be configured to "Continue" at the moment, but not to "Make Read-only"User says OK in the dialog (Cancel aborts model retrieval)Objects that the user is not allowed to change (e.g. no check-in rights in Windchill/PDMLink) are set modified in workspace. In the screenshot/example above that are about 43 objects!After the user has done the intended changes in his objects he wants to check-in all changes done by himselfThere are a lot of objects in workspace which have not been modified with the users intention ("continue" in the Conflict dialog) The user has to update objects in the workspace until check-in of changed objects is possible.This is very time consuming and frustrating! The above change would prevent this problem!See alsohttps://www.ptc.com/appserver/cs/view/solution.jsp?n=CS20636

Display Tolerance limits in Family Tables & therefore 2D Repeat Region Tables on drawingsArchived

Add ability to display tolerance limits to dimensions in Family table repeat regions so that the dimension limits can be displayed in a parametric 2D repeat region on the drawing.  A dimension of a designed part on an engineering drawing is often useless without a tolerance, yet there is no clear way to display several dimension limits in an associative/parametric repeat region table.  More than 80% of the time we have to break the associativity with the model, turning the table into dumb text (i.e. breaking the connection with the model) simply because we cannot display tolerance limits!  It strikes me as ironic (and frustrating) that PTC's (Note that P stands for PARAMETRIC) 3D design parametric software still cannot display parametric driving dimensions on an Engineering Family Drawing in a repeat region table thus requiring the user to break the parametric dimension into dump text; which is always a bad practice for any dimension!  What is a design without tolerance?  Often the difference between cheap junk and a high quality long lasting product.Please add this useful functionality to CreoThank you!LawrenceBACKGROUND:A knowledge base article was written for ProE 2001 that there was no way to display tolerance limits in a FT and therefore 2-d repeat region in an associative way. It suggested a work around by using relations and then inserting each limit dimension as its own family table column based of of the plus-minus tolerance. It has been over 10 years, 2 'revolutionary' releases and over 7 Product significant releases.  Yet this aspect still not improved.Reference: Document - TPI 123115https://www.ptc.com/appserver/cs/view/solution.jsp?n=123115