Skip to main content

Filter by idea status

Filter by product

6851 Ideas

Weld note options after Leader Orient (Tail)Archived

Currently for my company, I cannot find a way to meet all use cases for how we utilize the notes after the Leader Orient or Tail as we call it, of the weld symbol if it is created through the Weld Application. Note that we have customized our symbol to remove the REFERENCE which comes OOTB and drives weld sequence numbers after the tail. We replaced it with 2X which is our most common use of the notes after the tail. Users can easily change it to 4X, 5X etc. to represent that number of similar welds. This works great for us in 90% of our use cases. The problem is when we have a use case that needs either 2 lines or 3 lines of notes after the tail.  Example: I need this weld symbol to read as shown (Note that it was created as part of Weld Application tool):Redefine symbol as shown:Go back to symbol on drawing and there is no change. As I see it, these are my options with current functionality:Create annotation symbol in drawing and hide (Did not hide in picture) Weld Application driven annotationPros: I get annotation I want on final drawing deliverableCons: Symbol is not parametric, symbol will not match symbol in assy and length_AS is not properly positioned for some reason when used in Annotation (That is probably fixable)          Further customize symbol to have 3 linesPros: Annotation is parametricCons: Users will have extra steps of blanking out the top and bottom lines for 90% of weld notes and when 2 lines are needed, note will not be centered on tail          What I propose is a text editor build in to the Weld Application feature that would allow user defined notes with different alligment options. Blue outline indicates selected option. I am sure there is a better way to do that but you get the point. We would always want the note centered but other companies may have different requirement. Recommend a config option to set desired default. Example: This would allow user defined notes that reamin parametric and help to drive best modeling practices by making Weld Application more user friendly. If you made it this far thank you for your attention and please vote for this Product Idea. Regards,Jason Knighten

Fast HLR for drawingsArchived

I'm not sure how we missed this in our initial testing of Creo 2 but the Fast HLR in drawings appeared to offer a genuine speed improvement versus waiting for all the views to re-render (through 1 CPU core!). However we didn't appear to read the fine print. Apparently this is actually how it works today:"Fast HLR rely on multi-pass (3 for dim-hidden) rendering to generate HLR display. And will require these multiple passes for each view in the drawing. So if the drawing has 5 views there will be 15 draws to generate the HLR display.""Non-Fast HLR on the other hand generates a flat representation of HLR data (a new object is created which contain only the HLR lines) so redisplaying it will be much faster. This could also be seen with even a single drawing view in the drawing."The point is that this option provides benefit only when setting up the view styles the first time. It actually induces a disadvantage when tweaking drawings to conclusion (i.e. the last 20 percent that takes 80% of the effort/time). Our user base reports that working in large assembly drawings is a tedious affair with Creo Parametric versus other software of old irrespective of the various config options and so on.My suggest for a product idea is "please fix drawing performance for larger assemblies". We spend millions of engineering dollars each year in this mode and no amount of MBD features are going to change that in the next few years in all liklihood.