Recently active
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?7.0.22. What is the problem?When opening any part within Creo, the context menu looks always the same, independent if an object is in Draft or Approved state. After using an "invalid" option like Check-Out for an Approved object, the user receive an error message, that he isn't allowed to run this operation on this object.Idea would be to introduce a validator which hides invalid operations, as for example Check-Out for approved objects or revise and check-out for objects which are already in Draft stare. 3. Are you using a workaround? If yes, please describe it.No real workaround available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Simplifies a users life and makes him more efficient as he doesn't need to check for the state of objects, but
Creo 8.0.1.0“When viewing annotations in Model Mode, I am unable to see a difference between strong and weak dimensions. I looked but am unable to find a way to differentiate between weak and strong dimensions outside of Sketcher Mode. I am aware a ModelCHECK setting can search for weak Sketcher dimensions and display them in the report. I would like to be able to see these dimensions in a different color while looking at a 3D model. 3. Are you using a workaround? If yes, please describe it.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?8.02. What is the problem?threads remain in drawing after material has been cut away3. Are you using a workaround? If yes, please describe it.Yes, use a separate (second) extrude to remove the threads utilizing the surface type instead of solid.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.reduce unnecessary extra steps.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)unknown
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 10.0.1.02. What is the problem?The position of the 3D annotation is static relative to the 3D model.3. Are you using a workaround? If yes, please describe it.If we change the dimensions of the model, it may happen that the 3D annotations are not visible because they are inside the model. The family table has an issue with displaying 3D annotations where the shape of the 3D model changes dramatically.Generic Model with 3D annotations (MBD):Family Table:Instance with 3D annotations:4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If it worked correctly, we could use MBD on Family Table instances as well.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)If we use Family Table, we cannot fully uti
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 7 (production), Creo 10 (testing) 2. What is the problem?Config.pro options are provided as a csv so it can be determined what the new options are and what the values are but there isn't anything for the drawing configuration options3. Are you using a workaround? If yes, please describe it.Reading through all of the options in the help files4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Making it easier to find and implement all of the new drawing detail options.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Reduces admin time I would like the same thing as this: https://www.ptc.com/en/support/refdoc/Creo_Parametric/10.0/configoptions_pma_csv10000?&art_lang=en&posno=10&
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 7.0.11.02. What is the problem?Multiple drawing templates require different date formats, currently, there is no method provided to specify the date format separately, can only through config.pro set todays_date_note_format unified control.3. Are you using a workaround? If yes, please describe it.None.4. What is the use case would work in context or how it would apply to a practical situation.The date format required in the English drawing template is "%m/%d/%yyyy", while the date format in the Chinese drawing template is "%yyyy/%m/%d", when using the "&todays_date" parameter, you can use a format similar to the "&scale[.1]" parameter by adding the "[%m/%d/%yyyy]" after "&todays_date", which specifies the date format separately. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Company: Manufacturer of hydraulic components for hydrostatic transmissions.2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.Hello everybody,In detail analysis, in the Global Interference dialog, in order to identify the models, it will be good to have the possibility to add a paramter, in our example, the PTC_WM_NAME WIndchill parameter:4. What is the use case for your organization?Identy quickly the models in interference.5. What business value would your suggestion represent for your organization?Time saving in interferences' analysis.
1. What version of the software are you running?Creo 7.0.3 upgrade to Creo 7.0.102. What is the problem?Although we can modify text height by setting “TEXT_HEIGHT_FACTOR”, but we find we can’t adjust the size and type of arrows size as below picture shown. Arrow size is looked bigger than dimension text.3. Are you using a workaround? If yes, please describe it.No.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We suggest we can have more customized option in Eztol :1.Define Color : Target and Dimension2.Dimension text size3.Dimension value hide and un-hide4.Arrow Size5.Arrow Type5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Arrow type and size can't be modified to make Customers dis-like. And Dimension text height only can be adjusted by “TEXT_HEIGHT_FACTOR” to impact user experience. we hope more customized
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?9.0.32. What is the problem?We use this Repeat Region relation to show Bulk Items as "AR" for the quantity rather than a number. However, when we want to use the "Colum Model/Rep" command to add a column for a different configuration, it only works with the rpt.qty report parameter. 3. Are you using a workaround? If yes, please describe it.Creating separate tables for each configuration4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This request is to have a means to report quantities for bulk items as "AR" without having to use the Repeat Region relation so that it would work even with multi-configuration BOMs.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.0.1.02. What is the problem?We currently cannot use excel for UDF family table edit functionality3. Are you using a workaround? If yes, please describe it.We can export it as a .ptd file but it is difficult to edit if there are multiple instances included in the table. Also analyzing and managing the .ptd file will be difficult 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation. Our Idea it to enable functionality of exporting instances through excel format, so that they can be edited just like a normal family table instances and can be imported back into the Generic Family table.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Currently small number of users (10 users) working on t
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 9.0.2.02. What is the problem?There is no toolkit APIs to get the details of Cosmetic Sketch "Cross-Hatch"3. Are you using a workaround? If yes, please describe it.There is no workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Cosmetic Sketch Cross-Hatch" will help us to create or render the Hatch-Pattern of a cosmetic Sketch accurately in our application5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Currently it has high impact as our customer is unable to get the Cosmetic Sketch Cross-Hatch in the converted file using our application. There are conditions of Data missing.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 8.02. What is the problem?When displaying a symbol for a dimension using @S function in Creo modeling, there is no way to display the associated tolerance for that dimension. 3. Are you using a workaround? If yes, please describe it.The workaround recommended by PTC community as using super/subscript annotation and manually entering the tolerance values works fine in terms of displaying the tolerance but does not guarantee a true value. 4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.This is not going to benefit my organization in particular but the whole CAD community in general. For MBD/MBPD, the displayed tolerances should match with the assigned tolerances for a dimension to avoid any discrepancies between tolerance analysis done either using Creo or m
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?7.0.22. What is the problem?In Creo 3D itself, a user has no option to add objects to a change task, while the option is available in the workspace itself. Means if a user wants to modify an approved object in 3D, he always needs to switch to workspace in order to add it to a change task, or he uses Revise and Check out, which leads then to additional effort in the end to gather all the revised objects before completing the Change Task. My idea would be to add an additional button called "Add to Change Task, Revise and Check out" which will only show up for approved objects. When a user selects this command, he gets a list of active Change Notices within the CAD Tree which is currently open and has a search functionality as he has today in workspace. When a Change Notice has been selected, the user gets a list of all the Change Tasks within that Change Notice
Hello, as an idea for new Creo versions, wouldn't be nice to have "regeneration states" in the view manager to manage positions parametrically in the same assembly file?Manage positions and make them available in drawings is a very important task. Snapshot are not parametric and they go out of date very easily (e.g. inserting another model in the assembly or changing a dimension)Family table (changing position parameter or dimensions) could be a stronger solution by the Creo side, but they can be an issue in Windchill.A "regeneration state" should be a configuration of parameters to regenerate the assembly in a certain position. "Regeneration states" (similarly to simplified reps or exploded states) should be available in combined states and in drawings and they should regenerate parametrically.They can be managed by a table exactly like a family table, but generating internal states and not external instances. Thank you Federico
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 8.0.4.02. What is the problem?Unable to view the properties/parameter column in the File -> Open UI3. Are you using a workaround? If yes, please describe it.NO4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.When user have a library of standard components having part numbers in numeic format. It is difficult to identify the type od standard part. If column is available in file -> open UI dialog box with parameter, then it will be easy for user to identify the correct standard part5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)All production user.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.I am a Creo Support engineer for a PTC reseller where I handle many PTC related issues. 2. What version of Creo Parametric are you currently running?I am running Creo 10 and all versions below (to 4) 3. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. I really would like to have the User Defined in the SimRep columns in my Modeltree. Where is says, No Explicit State, I can check Exclude, Master Rep, Automatic Rep etc, but not User Defined. This should be a fly-out menu. Now I need to select the component in the Modeltree, RMB, User Defined.Adding it to the dropdown list should work faster.It would really speed up some time when working with large assemblies. 4. What is the use case for your organization?Share the knowledge with our Creo customers 5. What busines
1. What version of the software are you running?9.0.5.0 2. What is the problem?Horizontal navigation of the combined views in the modelling window is very cumbersome, when more than 12 combined views exist on a model.It should be possible to place this list in the Model Tree window, to allow user to have easy access to vertically scrolled list, or dock that window on the right side of the screen. I am aware that View Manager can remain displayed, but this is not an optimal solution.3. Are you using a workaround? If yes, please describe it.No workaround available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Standard designer's work, so switching between combined views , must be easily accessible for users. Especially important for MBD. 5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Switching between com
1. What version of the software are you running?Creo Parametric 8.0.5.02. What is the problem?In the 2022 ISO 129-1 standard, there is an alternate way of creating ordinate/running dimensions. This allows you to create an origin and have short arrows that point only to the feature being dimensioned - see attached jpg. This would be very helpful for us when we have a part with many small features we want to dimension so that the dimensions do not all have to be inline.3. Are you using a workaround? If yes, please describe it.Since we recently switched from ANSI to ISO standards we have switched the ordinate dimensions back to ANSI which allows us to have dimensions referencing the same zero on both sides of the part so there is more space for dimensioning. I don't like using mixed standards...4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.If Creo supported the alternate m
Creo Simulation Live starts to solve a model even if this is not fully constrained; it would be useful to have a warning for this situation
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo Parametric 9.0.2.02. What is the problem?Currently Weld Symbols are identified under User Defined symbol. There should be a way to identify them separately.3. Are you using a workaround? If yes, please describe it.No workaround available in toolkit API.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our application, we are providing User to control the types of PMIs/Annotations getting written in JT file. E.g. we have a option to control Dimension, Note, GTols, User-defined Symbols etc.But same User-defined Symbol is controlling Weld Symbols Annotations too.That's why we need an API to separate weld symbols from User defined symbols.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It's af
Can we have a fluid element? A sealed container filled with a fluid is then subjected to an external load. The fluid pressure rises uniformaly (ignoring gravity for the moment) and the structure as to respond accordingly There is NO fluid motion, this is not fluid dynamics, this is a static solution. This should work with assemblies.
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?CREO 9.02. What is the problem?CREO generates a lot of xml files (please see attached screenshot: *_log.xml).- currently, all files are getting saved at C:\Users\Public\Public Documents. (to the working directory)- user wants to save all these files under a new folder C:\Users\Public\Public Documents\Log-files.3. Are you using a workaround? If yes, please describe it.no workaround4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.it would help to save all *_log.xml files in 1 particular directory.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)little impact
It is currently not possible to graph measures against time steps, for example in a large deformation analysis. The results are all available in the .res file, but the formatting is clunky and requires either programming or a lengthy manual formatting exercise to use in Excel. If multiple time step results exist, there should be an option in the results window to plot measures against time step (or equally against a load value or the time fraction, to give a linear graph axis even if the time steps are not equally spaced).
I guess the title says all I've wanted to say... At the moment the program can solve only small deformation with its non-linear analysis. We can't run, for example, the fishing rod's analysis. Thanks Bye
When performing linearized stress analysis when viewing Creo simulate results, it would be nice to export the data points from the graph to a CSV or Excel.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.