Skip to main content
Aug 15, 2023 1:28 PM UTC
Acknowledged

Combine solid surface trimming in one step to remove threads when material is removed.

Related products:Creo Parametric

Please include detailed documentation such as screenshots, images or video.

1. What product and version are you running?
8.0


2. What is the problem?
threads remain in drawing after material has been cut away

3. Are you using a workaround? If yes, please describe it.
Yes, use a separate (second) extrude to remove the threads utilizing the surface type instead of solid.

4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.
reduce unnecessary extra steps.

5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)
unknown

3 replies

Aug 16, 2023 6:40 AM UTC
Status changed to: Clarification Needed

Hi @jfite!


Thank you for publishing your idea.


However, you give the bare minimum of information. The more details and context you give to document your idea, the better. Think about ways to educate and convince other Community members to support your idea and present your case to the product management team for consideration.

Here are a few examples of well documented ideas:

Improve/fix the sheetmetal mirror feature - PTC Community

[Eztol] Rename action not synchronous in Eztol - PTC Community

Always enable ability to 'Add View Label' in a dra... - PTC Community


Please elaborate within the next two weeks.

Additionally, I invite you to check out this topic where PTC executives explain product managers' approach to customer ideas and input for product roadmaps.

jfiteAuthor
Aug 16, 2023 12:46 PM UTC

Better clarifications of my issue....

 

My part starts as a large solid plate of metal and I have to install blind tapped holes on the plate's exterior for lifting fixtures; I use the 'Holes" feature for that step, and make a representation of the part to this point for my first drawing sheet. (See first image below)

 

As the part is manufactured, material is removed from the exterior of the plate which effectively reduces the remaining threaded hole depth. I use an extrude/cut feature for this step which removes the "solid" from the exterior of the part, then I make another representation of the part to this point for the next sheet of the drawing. It is in this second sheet of the drawing that it is evident the extrude/cut of the solid part trims only the solid and not the thread feature because the drawing still shows the original full length threaded feature with a portion now protruding from the trimmed exterior of the part. (See second image below)

 

As far as I know, the only workaround for correcting this is to add another extrude/cut feature, but this time apply it to "surface" instead of "solid".

 

My suggestion is to have an extrude/cut feature that can work for both solids and surfaces simultaneously and avoid the additional extrude/cut feature to remove the trimmed portion of the threaded hole.

 

Untrimmed partUntrimmed part         Trimmed part with thread surfaces untrimmedTrimmed part with thread surfaces untrimmed

Aug 16, 2023 12:57 PM UTC
Status changed to: Acknowledged

Hi @jfite!

Thank you for your idea. Based on the information you provided, we are acknowledging it as the Community management team. This is not a commitment from the Product team. Other users may comment and vote your idea up.