Recently active
1. Describe the Problemwhen creating pattern of hole type=simple you can pattern it and use the option "identical".when creating pattern of hole type=Standard & "include thread surface" turned ON - you CAN'T pattern it and use the option "identical".when creating pattern of hole type=Standard & "include thread surface" turned OFF - you CAN pattern it and use the option "identical". This cause severe performance issues as most of the standard hole created using "include thread surface" turned ON. Adding the support of thread surface should be quite easy as there are no geometrical/intersection calculation - only copying the surface. by doing it Creo community will gain significant performance improvement.2. Are you using a workaround?no actual workaround3. What is the use case for your organization?hole is a basic feature ant most of the time they are patterned.4. What impact does this problem currently have on your organization?All Creo users around the worl
1. Describe the Problem Even though it doesn't achieve the goal such as safety factor, it creates a shape with nothing any alert or message shown. 2. Are you using a workaround?No, I am a sales engineer for Creo at Distributer. I got this question from our customer.3. What is the use case for your organization?It useful for sell Generative Design module with Creo.4. What impact does this problem currently have on your organization?If a message is displayed if the goal is not achieved, at least the customer will not mistake the resulting shape for something correct.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 10.0.3.02. What is the problem?The "View Manager" dialog box column widths are not saved after user adjustment inside the dialog box. Example - The user opens the View Manager dialog box to view a long list of custom simplified representations. Some have longer descriptive Names that are partially obscured by the second column due to the default dialogue box column width. Name column width, making it difficult for the user to distinguish between them. To reveal the full Name, the user may choose to either autofit by double clicking the vertical column border line in the heading bar or click and drag the border line to expand the width. After closing the dialog box, the width resets to the initial narrow width and the user must repeat the column adjustment process, adding time to the workflow.3. Are you using a workaround? If
Creo has the capability to create "Standard" holes (internally threaded features). Part of that functionality is to read information from the .hol file and transfer it to the Properties tab and (at least a subset of info) to the Note tab. The note then can be displayed on a combination state. This is very handy. But the same functionality does not exist for cosmetic thread . Make an extrude or revolve then apply a "Standard" cosmetic thread. It reads the same .hol file and transfers it to the Properties tab, but there is no Note tab. You're stuck having to make your own note. Not very handy. This is an enhancement request to be able to auto-generate notes for external cosmetic threads (externally threaded features). 1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.A&D industry , Role is cad/PLM manager 2. What version of Creo Parametric ar
1. Describe the ProblemUser Defined Features (UDFs) are one of the most powerful tools in Creo Parametric, but they still have the outdated interface based on the Menu Manager for their creation and modification:I propose replacing this old interface with a dedicated tab that clearly shows what is being done, with selection collectors listing the modified entities and the external component.This change would be consistent with the interface of the Merge/Inheritance and Copy Geometry features. 2. Are you using a workaround?I use the current interface hoping for a future improvement.3. What is the use case for your organization?This old interface is always a source of complaints and difficulties from users. New users always try to stay away from any Menu Manager, and experienced users hope they never have to edit or update UDFs.4. What impact does this problem currently have on your organization?User Defined Features are considered one of the most useful tools in Creo Parametr
1. Are you using a workaround?Not possible yet2. What is the use case for your organization?The Windchill BOM and Ref. Designators currently can not bee shown on a drawing and in the BOM balloons. This should be possible so that the Windchill BOM is linked associative to the drawing and vice versa3. What impact does this problem currently have on your organization?Huge. Now we have a Manually creation of Bom balloons without a link with Windchill Ref. Des.Describe the ProblemSee above
1. Describe the ProblemWhen mirroring parts within an assembly, the parts must be mirrored one at a time. When creating a large, symmetric assembly, this can be quite arduous and requires many features and click to achieve.2. Are you using a workaround?The options that we have found are to either create the mirror features one by one or to create a sub-assembly and mirror that. Using a sub-assembly adds another level to the assembly, however, which is not always ideal, and means that we have to add gathering parts in the Windchill BOM, which we prefer to avoid where possible.3. What is the use case for your organization?Sometimes we have an assembly where the parts are symmetrical and need mirror images creating, or sometimes just need the placement to be mirrored. Obviously, we could just mirror the parts individually, or place them as required, but using a multiple part mirror function would lead to a significant reduction in the time it takes to create such an assembly.4. What impac
Currently in the drawing of Creo Parametric 6 the weld symbols are generic symbol saved/hide in a system folder (System Syms). There is no special button for the weld symbol. Then the users have to choose the Weld Symbol file and then select a lot of checkboxes (hide in other checkboxes) to edit the symbol as you can see in the following picture: Notice that the preview of the symbol on the right is small and every time you have to change the dimensions of the preview panel and enlarge the window. And every time you change something, the preview loses the zoom. This interface is difficult, slow and sometimes frustrating. And you cannot change the type of Weld Symbol, you have to delete it and create another symbol from another file and clicking the same checkboxes. So I ask you to replace this method with a special tab for the welding symbols, like what happened for the Geometry Tolerance in Creo Parametric 4. I know that there is a Welding applica
1. Describe the ProblemI can understand there is a 5.12mm3 interference, but I don't know how much is needed to move back in Y axis to avoid this, if that information was available, as a column display or right click on that row, that would be very useful.2. Are you using a workaround?Visually inspect and decide which direction need to find the interference amount, create a cross section & measure the distance.3. What is the use case for your organization?After detecting the interference, one typical action is to move the component away to avoid it. Having a max X, Y & Z value beside the volume would allow for a quicker solution implementation.4. What impact does this problem currently have on your organization?All users, adding several minutes to verify each interference.
1. Describe the ProblemThere has to be a better way: assemblies with countersink holes & flat head screws. I have a hole pattern of countersink holes.I assemble a flat head screw to this hole (shank to hole, tangent the hole surface to the screw taper. it then want's a 3rd constraint. I add a parallel constraint: plane to surface..) I then pattern the screw, to follow the hole pattern The screws then all follow some weird pattern. They are all there; the dots show the proper placement, but the screws are all wonky. Only the original is properly placed in its hole. The others are all then floating in space, randomly.. (from what I remember this has always been a problem..) Either fix the way the pattern function works with these type of constraints (its the tangent constraint that causes this behavior..)orFix / find a better way to constrain countersink holes & flat head screws..2. Are you using a workaround?cons
1. Describe the Problem Oftentimes, especially when working on models partially derived from imported geometries, it takes a lot of effort and time to obtain a closed quilt that can be solidified. A suggested improvement is to include a third option in the merge feature (or create a separated “approximate merge” feature, if preferable): this option could be named Auto-stitch or similar naming.If the user selects the Auto-stitch function, a “tolerance” field is activated, where the user can select any value greater than the model Accuracy. Possible implementation:First attempt: the software extends (Same/Tangent/Approximate) both sides of the open gap + mergeSecond attempt: if the neighboring patches cannot be extended, a tiny surface is created (e.g. Boundary Blend) that fills the gap (preferably with tangent-tangent boundary conditions; free-tangent or free-free would be acceptable in the worst case scenario) On a side note, the Creo Import Data Doctor has some tools that allow to obt
1. Describe the ProblemWe are using the ProToolkit to read a customer file and examine Cosmetic Sketches. Currently, we are not able to read cross-hatch information using the API.This is a problem for us because our software needs to represent the sketches as accurately as possible.2. Are you using a workaround?No, we have not found a workaround, and support recommended opening a Product Idea.3. What is the use case for your organization?Our organization uses the ProToolkit to generate drawings and images from Creo parts. Without the cross hatch, the drawings appear incorrect.4. What impact does this problem currently have on your organization?Currently this is not a large impact as not many customers are using Cross-hatching in Cosmetic Sketches.
1. Describe the ProblemEnd users are unable to view the license usage either from Creo+ portal or application.2. Are you using a workaround?Only administrators can view the license usage3. What is the use case for your organization?Users would like to check the license usage for floating licenses4. What impact does this problem currently have on your organization?Users get depend on admins to check
1. Describe the Problem1) Add the option to not show the current implementation of the automatically created hole note. When the hole note is automatically created the annotation is part of the 3D annotation set. This has been previously request by others, but remains an issue.02-25-2016: https://community.ptc.com/t5/Creo-Parametric-Ideas/The-option-add-note-unchecked-by-default/idi-p/46312905-25-2022: https://www.ptc.com/en/support/article/CS1594622) Provide enhanced methods for hole identification. 2A) For instance instead of a separate hole note, can the hole details instead be pushed into the drilled hole dimension. I often either do this manually or the feature is provided by GDT advisor.2B) Could the standard note tool provide a UI to create industry standard callouts by selection box. I know there is some capability to setup specific type notes in the hole tables, but the number of options to setup is cumbersome in the current hole t
1. Describe the ProblemWhen working in Creo Simulate I often add multiple loads or fasteners. I use copy/paste for this. For example from the first pasted fastener the name is [name]_copy_1 and so on with increasing number.It would be very useful to have a feature something like if the fastener is called "Fastener_01" then the next copy/paste of that will be "Fastener_02" instead of "Fastener_01_copy_1". Thus a smart indexing when it detects a number as the last character.2. Are you using a workaround?Manually changing the name3. What is the use case for your organization?for all analysis with fasteners4. What impact does this problem currently have on your organization?slows analysis setup.
1. Describe the Problem When using the Sketcher, and when deleting an entity, the system will present this prompt if this entity is a reference for a feature that exists later in the model tree: Note if one answers "Yes", then there will be a regeneration failure upon exiting the sketch as the downstream feature will fail because the reference has gone missing. If one answers "No", then the system will leave the entity untouched. Also note that if multiple "parent" entities are being deleted, then the user is then forced to tediously click a bunch of times... Therefore, proposal is to add to the dialog box this additional functionality: "Yes to all" and "No to all" buttons would simply save the user from having to do the multiple-clicks. And the "Replace with..." button would allow the user to select another entity to replace the one being deleted. (it is basically the shortcut to the "replace" function) 2. Are you using a workaround?No. Just clicking
1. Describe the Problem When using the function "Generate Design" in the generative design module I get failed models. I have tested the new use of mass at point feature and applying acceleration loads in the load cases. This causes the failures. If I switch back to applying a force instead, the model generates ok. Thus there seems to be a bug somehow. 2. Are you using a workaround?Workaround to not use the mass at point feature.3. What is the use case for your organization?all additive manufacturing designs4. What impact does this problem currently have on your organization?Loss of time
Today in cabling application there is a well known limitation once trying to flatten a cable which the wires route to pins ( multiple entry ports ) rather than single entry port. as a workaround ptc suggest to use "sub assemblies". this workaround work reasonably, however cause, again, issues down the line in the flattering of the cable. a solution is needed to overcome this limitation. possible solution can be ignoring the "real" length in the mfg files ( for display purpose ONLY ) in case trying to solve the issue from the "roots" either create "partial flattering" between the sub assemblies. this will improve product usability and save the user considerable time & effort
You modernized the graphtool in Creo 6.0 but there is not any probe option on Creo 6.0 and Creo 7.0 for read the clicked point values on Graph Yes, you have to place your pointer on a data point to Show x and y coordinates, this behavior already same in Creo 5.0 and other older versions, not a new enhancement. But In Creo 5.0 we can also see the clicked values bottom the graph window. It was a very useful thing to see that permanent value on there. My opinion it's not a good enhancement and PTC really sometimes disrupts what is available when trying to do new things, I hope it come again. We’will very happy to see it again on next Creo updates.
The ability to change which spool was used to create a wire after the wire was created. Currently, if you wish to change the spool, you have to delete the wire and create a new wire.
If it takes a long time to execute the round command, an icon that can cancel the processing (red x icon displayed at the lower right of the screen, see attached)Creo itself is canceled to cancel the process in the middle because it is displayed just before the end of the process.Since the removal command is displayed immediately after the processing starts, it is requested that the removal command be displayed immediately after the processing starts even when the round command is executed.
This is a product idea conversion of case 12775204. New API required to access intersection attachment of annotations (now it is possible for dimensions only).
According to the article CS245975, currently there is no API available to retrieve the name of the exploded state set in the drawing view. Please, add the corresponding functionality.
This is a product idea conversion of case 13296591. API extension required to query references of an ordinate baseline dimension, because there is no standard way to do that.
This is a product idea conversion of case 13620263. API extension required to create a custom symbol with variable text which is embedded to a note without user interaction.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.