Recently active
Until Creo 4.0 we were using the Attribute PTC_MATERIAL_DESCRIPTION instead of PTC_MATERIAL because for the latter you only get capital letters, the "description" can be according to (ISO) standards and include lower case. Starting with Creo 7 there is multibody now with the possibility to define more than one material per Part. If one wants to designate only the material assigned to the model, and none of the materials assigned to bodies to the drawing frame one has to use the Attribute "PTC_MASTER_MATERIAL" which only includes Capital letters. To work according to standards, lower case letters are needed. This is why the Attribute "PTC_MASTER_MATERIAL_DESCRIPTION" is needed.
In sketch mode, it should be possible to convert arcs to circles.
The PSF is useful for setting environment variables that are read in no matter where parametric.exe is called from (like windchill), but when you change license configurations the file is overwritten and your changes are lost, and the changes have to exist in every different PSF that is used. Instead of all that, add a separate config file (xml, perhaps?) that will be read in by parametric.exe, no matter which PSF is used. For full implementation, allow the user to specify a config file other than the default in the command line. Basically, it's just a second PSF being read in, but it is independent of PSF selection and does not get overwritten by a reconfiguration.
It could be very useful in order to dialog with Autodesk world
Hello, When working on large assemblies, when assembling small components (likes screws). Sometimes the drag handle is located far from the part itsef, and this 3d handle is not dependant on the zoom, so the placement becomes difficult ... Same thing can be noticed with cross sections 3D translation handle , its also not dependent on the zoom, sometimes difficult to use in large assemblies.. Can you create a setting that allows the 3D handles dependent on the zoom?? Thanks in advance
Sometimes, user, presses the regeneration button, but it should be possible to stop it. When we have a heavy project, regeneration times can be long. And if by mistake the user presses the regeneration icon, it will take a while to make the complete regeneration of the project! So make the stop button work while regenerating.
When using a 4K display the font size of windchill is quit small, you can adjust this manually , but it's not a saveable setting. We'd like to set the font size for this in creo settings or in a subpage of the browser.
1. Describe the Problem The length of the elbow on dimensions is different than the length of the elbow on Leader Notes; likewise, there is an extremely small gap between the end of the elbow and the text. 2. Are you using a workaround?Adding a space character to all my notes.3. What is the use case for your organization?We want to follow ASME Standards, and this current implementation is not ASME compliant.4. What impact does this problem currently have on your organization?Student portfolios look bad when they use them for job interviews.
Dear PTC team, We request adding an 'Export' button under the 'Sessions' tab in Dashboard | Users | User ID <#########> in the Performance Advisor window. Additionally, we request including the user name to assign with the user Id .
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric 7.0.9.02. What is the problem?I have a drawing with multiple dashed line fonts. In Creo Parametric, the spacing of these line fonts changes dynamically as I zoom in and out so that they are always readable. When I publish the file to a DXF or DWG format, Creo appears to be assigning a linetype scale factor that I cannot control. When I import the resultant DWG file to AutoCAD, I can use the LTSCALE command to enter a new scale factor. I see when I do this that Creo has assigned the factor 2.585 for this particular drawing. Other drawings have their own scale factors applied, I assume based on the size of the drawing sheet (larger sheets get larger scale factors, resulting in wider spacing). See community discussion that led to this idea post:https://community.ptc.com/t5/3D-Part-Assembly-Design/Any-way-to-assign-linetype-scale-when-exporting-DXF-DWG
1. Describe the ProblemToday, the plybook creation creates (very quickly by the way, kudos to the developpers for that) one page per ply showing different information about each individual ply. In particular, there is a "placement" view which help locathe the ply in the overall component. Some customers use to create "chapters" in their plybooks to give an overview of the next phase of the draping. Those implies to be able to create an additional drawing page for which they will select multiple plies/cores to be displayed in a single view so the worker has a global understanding of what's coming next. The suggestion here is to be able to selected multiples plies/cores in the view definition.2. Are you using a workaround?Today, there is no way to do it properly. The only workaround is to create multiple views (one per ply/core) and superimpose them. 3. What is the use case for your organization?Enhance the quality of the shopfloor deliverable by giving them a better
1. Describe the ProblemWe are creating a master template for both CAD and CAM in the Creo. The idea is to change the master model parameters to get the different designs within a part family.Actually the tagging system works well for CAD models derived from the same master template in the interchange assembly, as they share the same IDs. However, it does not work well when it comes to the manufacturing inheritances. Even though all initial CADs share the same IDs, but their associated manufacturing inheritance surface IDs changed during the creation. This cause the failure of the tag creation in interchange assembly for those inheritances. As their surface IDs are no longer the same like their reference models.2. Are you using a workaround?We have reached out to PTC SME for help. He agreed with this observation. The current workaround we have is to manually create those tags. But this is a very tedious work and lean to errors.3. What is the use case for your organization?We are creatin
As-is, the dimension sometimes pops up behind the measure dialogue box, it would be better if it didn't so you wouldn't have to move the dialogue box to find the measurement. Also, not having to hold the Ctrl key to select two items would be helpful. Another enhancement would be to be able to escape the measure tool using the middle mouse button.
1. Describe the ProblemWhen creating a waterline using the Waterline feature in Tool Design, include a curve that defines the centerline of the waterline to the appropriate depth. This curve should be automatically placed on a specific layer to be shown or exported alone from the rest of the part / assembly.2. Are you using a workaround?No3. What is the use case for your organization?Customers and Mold Flow Simulation software require a solid of the cooling lines in the mold design. At very least, the simulation software requires a centerline stick diagram of the cooling line channels. If a curve can be incorporated into the waterline command and placed on a layer, that layer can then be isolated and exported for the simulation software to import.4. What impact does this problem currently have on your organization?Currently there is no functionality to export the centerlines of a cooling circuit in a mold design. The mold designer will have to create curves after the fact. Or, the simu
1. Describe the ProblemParameters in the Model Tree Columns dialogue are not sorted alphabetically: Article - CS434304 - Not possible to sort entries in Model Tree Columns User Interface accessed from Model Tree in Creo ParametricWe sometimes have models with more than 100 parameters.We already make use of multiple mapkeys to load model tree configurations, but sometimes those are not suited to a certain task, and you want to quickly change the parameters displayed in the model tree.Currently, it feels like you have to start a project to achieve what should be a non-effort.2. Are you using a workaround?If you know the exact name of the parameter, you can enter it in the Name field. If you don't know the exact parameter name/spelling, there is no workaround.3. What is the use case for your organization?Fast(er) information overview. Performance is bad with many parameters displayed in the model tree, so fast reconfiguration of displayed columns would be helpful.4. What impact does this
1. Describe the ProblemWhen importing an EMN file into an already existing PCB assembly, modified components are deleted and reinserted later in the model tree. This happens even to modified components that have their changes declined. Any features that reference these components will fail due to the new order of the model tree as these components are now listed after the features.2. Are you using a workaround?Remove collaboration information from components that need to be externally referenced.3. What is the use case for your organization?Wires that reference a component on a board will fail because the components will be reordered to be after the wires.4. What impact does this problem currently have on your organization?We are trying to leverage EMN/EMP files to collaborate with ECAD/MCAD data but this holds us back from working quicker in our designs.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8 and Creo 92. What is the problem?The "References" menu needs additional control options to enable efficient workflows. "Remove" and "Remove All" do not provide enough capability for large "reference sets"3. Are you using a workaround? If yes, please describe it.The only workaround is to do lots and lots of clicking.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.One example is if an annotation has references which get altered. Especially in an environment where semantic references are defined. Then is no way to only remove the failed references. The user can only remove ALL the references, or go through the list one by one. This issue applies within many contexts of Creo Parametric. Another example is if a large
As a request by @lwestbrook, I am breaking up the massive Modelcheck idea thread here: https://community.ptc.com/t5/Creo-Parametric-Ideas/New-ModelCheck-Ideas/idc-p/692247#M13722 For this idea use modelcheck to Check that there are No Assembly Cuts with automatic update intersection. The automatic update intersection capability can drastically reduce performance and regeneration time.
Change the dimension to be entered to be the full height of the beam section as usually given in shape/section data tables. The entry of web height only (inside flange to inside flange), and the on the fly math is irritating. Better still, enable the selection of sections from the AFX data as an option as well.
Frankly I didn't think I had to post such a trivial idea but I do: Please make undo-redo possible within piping environment. Maybe too easy...
It would be very useful and save a lot of time to have the ability to use the Fill tool within the IDD environment as is the case with the Boundary Blend. Currently (Creo Parametric 7) to create a planar surface you need to create it after the Import Feature and then use the Collapse tool to insert it into the Import Feature.
If the imported part is symmetrical and the import error occurs on one side only, using the mirror can save a lot of time by deleting the wrong side and mirroring the correct one. Currently it is not possible to mirror surfaces inside the Import Data Doctor.To mirror a surface, you need to create a Mirror feature after the Import Feature and then use the Collapse tool to insert the new surfaces into the Import Feature. It would be better to perform this operation inside the IDD, without going in and out of the Import Feature.
If you are the true Creo User then you may like to have keyboard shortcut for rotate and panning. It will help those designer whose mouse of their laptop are not working and need to present some thing urgently.
A large assembly drawing can result in an equally significant file size for both the Creo .drw file and the generated PDF. We have already used simplified representations to do their part of the job in reducing the file sizes, loading times etc., but we are also looking into the Edge display quality setting. We are modeling 12 meter long plates, thickness around 7 mm, bent with a radius of 20 meters.In the model we experienced the need for the Edge display quality set to "High", sometimes "Very High" to have a correct display of attached parts. Low display quality settings make the parts appear to be intersecting, while in reality they are not. The effect on graphical performance of this setting seems not really significant. The 2D drawings of the assemblies and parts are by default set to have a HLR edge display quality set to Follow Environment. There seems to be no effect of setting this manually to a lower setting, even "Low" results in the same lines on both the drw and PDF. The f
Add simple drawing tool like Paint's tools to draw on an 3D representation to help explaining ideas during design review
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.