Recently active
- Light modules for Modeling in the Basic license included, like in Creo Parametric.o - Part library, limited to 50 parts in sessiono - Relations, limited to 10 relationso - Sheetmetal, limited to 10 sheetmetal featureso - …qs
At present it is only possible to snap to geometry lines on a workplane.In order to snap to contruction lines it is necessary to convert them to geometry lines (or place geometry lines over them) first.In order to avoid the need to abort a command in order to adjust the contents of a workplane before restarting the command, it should be made possible to snap to construction lines as well as to geometry lines on a workplane.
希望增加改变3D模型中的曲线宽度这一功能, 以便于我们在做一些方案报告时, 特别是显示分模线时尤为重要, 这样让客户或其他的同事能清楚地理解产品的模具结构和分模方式
If the file is missing which INPUT should load the meaningless error message appears: <Enter 'input_filename'> or <Dateiname fÏr input eingeben.> It's often hard to find the file in which the INPUT function is called. In most cases ME10 must be restarted with TRACEing to file. To display the filename of INPUT-file which cannot be load by INPUT will save much time programmers must use for searching and tracing macros. PS: This should have been integrated in ME10 Version 4.31
Minimize or hide a command prompt , when running an OS script(@SYSTEM) from an mapkey
Currently the tool requires an annoying workaround to apply a profile that appears as per 14.5 on the drawing.
In Creo 2.0 a blue color is used in order to show if a feature is in surface.Add a way to select an other default color choice these feature.It's not possible today.
When mating parts to an assembly, sometimes you need to translate, rotate, orient mode, and/or adjust.When 5 of the 6 degrees of freedom have been fixed by the defined mates, could the move tab realize that and automatically adjust so that if you need to rotate a feature (need to have a large difference in angle for angle align) that rotate is selected versus translate.Or if the last desgree of freedom is fixed on an axis that it would default to translate.Thanks, Dale
I've done this many time. I created a sketched hole for say a flat head screw. I pattern it for the bolt pattern on the flange. I create as drawing, and add it to the next higher level assembly. Then, and engineer says "No, lets tap those holes instead." Oh crap, now I have to delete the pattern to change the type of hole. My drawing is all messed up and I have to fix it, and the the next higher assembly, and maybe even more, needs to be fixed!PTC, make it so that if you have a pattern of holes you can change the type of hole without deleting the pattern.
In past releases, we used the Measure Distance command to measure the XYZ position of points relative to a coordinate system. These measurements were written to the trail file, where we copied them quickly into an ASCII text file. As of Creo Parametric 2.0, this is no longer possible.We want a quick way to capture 20-50 screen picks and/or geometry selections into XYZ ASCII reports. Please either return the prior functionality or provide another way to quickly capture this information. Creo 2.0 allows only one point at a time.We noticed another enhancement request Product Idea related to a point table. This may serve the same purpose.We use the XYZ locations for CNC processing for milling, measuring, etc.
At present it is only possible to display the control points on a spline curve. It is not possible the reference them.It should be made possible to reference these points as well. For example, it should be possible to measure the distance between such a point and some other point.
It is currently not possible to create dimensions on open B-splines in Annotation.It is, however, possible to create 3D-dimensions on open B-splines in Modeling, which can then be transfered to Annotation via a documentation plane. Unfortunately this method does not allow you to transfer the center lines.It should be made possible to create dimensions on open B-splines in Annotation.
Directioin of the mouse weel zooming in Creo (and other PTC products) is opposite to pretty much all the other programs: rotating the weel UP makes the image zoom down. Quite inconvenient when switching from Creo to some other program and back. It would be good to change the zoom direction, or provide such an option.
associated drawing should also get copied when replacing a part in assy. with copy method
Allow switching between sheets on multi sheet drawings by using the Ctrl-PageUp and Ctrl-PageDown keys on the keyboard.
When you select an object with "Probe Selection" (CTRL-Tab-Key) currently it opens by default the elements tab.For my use case it would be better if the probe tool opens by default the "Objects" tab and expands the first node where you can select the owner assemblies.
When first creating a drawing in Annotator the 3D Aux viewport opens providing the user with a view of the part or assembly, an line image of a drawing border and the two directional arrows used to describe the Up and Front direction of the part in regards to the border orientation.The colors of these arrows are bright yellow and bright green and for most of us this is not an issue however if a user has blue/yellow color blindness and then it changes the scope of the colors.We need to have the ability to change the color settings of these arrows to something other than yellow and green for future use of the tool by users whom suffer from certain types of color blindness.Cheers,Thom
Upon creating a Structure in Creo & AFX, it is often required to arrange the structure in sub assemblies. Though AFX has a functionality of defining Weldment Groups, the Process is often cumbersome and error prone and it does not give desired BOM. If components of assembly are restructured using normal "Restructure" functionality, the reference groups created during placements of AFX components could not be restructured ( Core Functionality of CREO / ProE does not allow features created in assembly to be restructured or to be moved to a subassembly). thus restructuring AFX components without their corresponding reference groups would often result in circular references and regeneration failures.Enhancing the core functionality to enable restructuring of feature groups is must for the optimal performance of AFX.
Pro/E Drawing Balloon Management Currently, when a reference on a Pro/E drawings is changed, balloons associated with the reference will disappear or fall of the drawing without warning or any indication that the balloon has been lost. Design Services ask if there was a configuration option that would assist with managing the balloons when references are changed.
When saving from Modeling to ModelManager the save dialog has the Description populated with the Name from Modeling, but before saving new Models/Masterdata we need to go through and add spaces to separate a long text string into a series of words. It would be a great efficiency benefit if it were able to identify shifts from lower case to upper case and add a space at those points. It also might be cool to strip .01 off the end of the names. This may need to be parameterized since some people may separate their words using periods of underscores rather a change in case.
Control points manipulation in ISDX/REX and Import Data Doctor lacks some functionality compared to competitors (ex. CATIA V5/6, NX) : - Selection of control points by rectangular or polygonal window.- Symmetrical manipulation of the selected control points respect to a mirror plane. - Uniform and non uniform scaling of selected control points.- Rotation of the selected control points in the view plane or around an axis.- Dynamic update of the trimmed surfaces while editing the control points.
It would be useful to provide an API call to access the state of the "Unordered" checkbox in the "Geometric Tolerance" dialog (please see screenshot).
We can assign dynamic properties to pin joints but not ball joints which seems to be a severe limitation when studying the behavior of mechanisms in Mechanism Dynamics. We use this capability to design lifting equipment and the inability to define these joints with friction enabled makes it impossible to get reliable results.
After running a multi-pass adaptive analysis with multiple load sets, have the capability to show a convergence graph based on all of the load sets for a results definition.At the moment this is not possible and can only be shown for one load set at a time.
Is it possible to have an associative detail dreived from existing geometry? It would be very usefull to have such a functionality!
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.