Recently active
When creating a threaded hole as standard hole in Creo Parametric using a *.hol filethe hole depth and the thread depth will be calculated initially with the following static formulars:DRILL_DEPTH = 3 x DRILL_DIAMETER for example: DRILL_DEPTH = 3 x 7 = 21THREAD_DEPTH = DRILL_DEPTH / DEPTH_RATIO for example: THREAD_DEPTH = 21/1.25 = 16.8If the threaded hole was placed there is no more intelligence like this for further changes.The only rule is that the thread depth can not be deeper than the hole depth.If this happens the thread depth will be changed to the same value than the hole depth.With this behaiviour it es not possible to create an individual hole depth (not every hole is 3 x DRILL_DIAMETER)with an automatic change for the suitable thread depth.It would be nice
Add functionalities to Graphics Toolbar.For example: adding Datum Tags.
For example, add a lots of render templates for users to select, just like Solidworks. or provide a simple render process guide template, just like Mechanica, user can add actions step by step.
The middle mouse button (MMB) does many thing, some contrary to others. In many situations it means done or move to the next step in the process. File > Open > select a file > MMB opens it. MMB selects the check mark in the dashboard, completing the feature.In others, however it does the opposite. In the Component repeat dialog it actually will cancel, removing all the placed components.In other situations it starts a new process. In the view manager it creates a new view, simplified rep, explode state, etc. When placing notes or balloons in a drawing it starts a new note or balloon placement.During symbol placement it does the same as the LMB - places a symbol.In others it does nothing at all.Since I mostly associate it with 'done' or 'next' I cant tell you how many times I've accidentally created a new model orientation in the view manager or started a new note or placed an additional symbol or canceled and lost all the new components I cr
It would be great to be able to write a short description of what I am doing and why before each feature or group of features - just so that when I (or some other poor soul) have to modify it later, I have an idea of how to proceed.I use Annotations currently, but the character limit is crippling.
The ribbon is bad enough, but (sorry, that was a personal judgement) now I have to go searching the screen for notifications too?!Notifications are important to working efficiently, especially when models can fail to save. Currently, the only place such errors show up is in the status bar.Please allow the status bar to be moved to the top of the window like in earlier WF versions.
Planar Sections created with Creo Parametric 2.0 generate "0" dimensions after datum plane selection.As a consequence, "Show Annotations" action in Drawing Views displays lots of unwished "0" which renders more difficult the choice of dimensions to keep.Please add “Through” by default in dimensioning box (and “Offset” if you need to add dimension)- No “0” dimensions by default when datum plane is selected- If dimensioning is necessary, create an offset plane.
When you add a column/row to an existing table, the text style should match that of the other columns/rows.
We are running an application created i JLink roughly 150000 times a year (increasing at 15-20 % a year). To get the correct output we need to change the recipe when saving to CreoView format in different part of the application. This feature exist in Creo 3 as well as in interactive mode. To keep the performance in line with the workload we would like to have this feature in Creo 6 and on wards.
We often turned off datum display since many planes are required to be created in modeling and also all the parts have some default planes. However When we select the plane in model tree, if the planes will highlight in the model graphical section too, then turning on datum display is not required. It would be helpful.
Allow Pro E/Creo to remember column widths set in various screens; if working with a family table, remember column widths from previous access so I don't have to keep re-sizing the columns to see the full value in the cell.
With Creo 2.0, some handles have disappeared of certain 2D elements like dimensions and witness lines (still OK for notes moves).The handles have been replaced by combining moves and SHIFT and/or CTRL and/or ALT or other right click actions (create witness line for example).We have lost the visual possibilities of modifications like in Creo/Elements Pro 5.0 drawings.We would very much appreciate to have ALL the 2D handles back in Creo 2.0.SHIFT manipulation can be maintained for “usual” horizontal or vertical (and 45°) moves.
Since Creo 2.0, the way to move horizontally a dimension and a note is different - for the dimension, SHIFT button need to be used - for the note, dragger need to be used This is very disturbing for the user. The note and dimension should be moved in the same way The best solution should be to have the possibility to use either the SHIFT button or either the dragger for note and dimension
In larger assemblies would be nice, if there would be an option to select few parts an then hide all unselected parts(or like in simp rep. revert selection). For example: You select 3 out of 300 parts and hide all 297 parts.Cheers,Bojan
When in a part model there are many instances when it is necessary to change a part model that was inserted into it.The only way that I see this possible at this point is to delete the original inserted inheritance model and bring in a new model.It almost looks like you should be able to do this, but you can't.The pattern of replacement should be1) Edit Definition; to modify the inserted part2) Select No when prompted to retrieve the existing model3) There is a select a model prompt which you can browse to the appropriate model location4) If you replace the existing name with a * the needed model appears.5) When selecting OPEN the replacement action failsIf I understand correctly this does work when replacing Family Table parts.I would like to be able to do a merge replacement for all part models.
In very large assemblies finding your way around the model tree can be painfull. The coloring is helpful for sure but it would be even better if you could just RMB/Zoom to on a component. Also if you had items in the selection buffer you could RMB/Zoom to to resize the screen to those selections.
Have the ability to set a tree.cfg option that sets the width of the first column in the model tree. I have so many feature names and parts names that exceed the default width, and switching windows from part to part or assembly resets the column width to the default.
Be able to define a 1:1 screen Zoom of 3D models to physically measure the model on the screen.It is possible to print a 3D model in 1:1 scale but when often need to show our 3D models (watches) on the screen in real 1:1 dimension.It is very important for us to see them at the right 1:1 scale. In Rhino, it is possible to calibrate the 1:1 Zoom by measuring a stallion.
The value of character limit (80) is too low, because we need more characters than 80 to add new article numbers on our drawing.We would prefer to make this value free of any limit.
At the top of the Creo ModelCHECK Report window (attached screenshot), Error is indicated by a red symbol. Users are not allowed/not able to check-in the object. But further down, it says Parameter Error (for instance), with the warning symbol. Not so intuitive. Not all Errors and Warnings are expanded in the ModelCHECK report window. In this example, the Errors aren’t that visible to the users as it should if the tab was expanded.
Hello, ModelCHECK is not optimal to use for assembly components checks and corrections. Explanation : End-users are always complaining that modelcheck (interactive or regen) only shows results for top level assembly (not for its components) in the first result screen. Example : Assembly "Test_Assembly.asm" is containing "Test_part.prt", both of them in my MC configuration should show "LAYER_MOVE" check as they both have layers with old names : - When i launch Modelcheck interactif => All levels , the first screen only shows results for the main assembly (test_assembly.asm) : - If i want to see/correct the components, i need to add 3 more clics (asm models => then choose the parts => then launch the MC correction), and this has to be done for all the components one by one (time consuming!) : Can you please allow the possibility for choosing what to correct (Assembly AND/OR Components) directly in the first result page, this will s
Today the handling of hoses (flexible pipes) is very poor in specification driven mode.Please make some enhancements, i. e.:Possibility to route two or more hoses based on another hose (tangential touching for package of hoses):Possibility to change the routing direction of a segment:Possibility to create a straight "pipeline", but then use angled fittings at the ends:
For the moment, if you use a drawing template, you can't select the default simplified representation.The only two possibilities are: - Create a view in the drawing template --> not very useful if you want use the template for lot of different drawings - Add the model in a empty DRW to select the good representation --> no drawing templateIt would be nice if we can simply define a default simplified representation for a drawing template !
When threaded holes are created in a part (ref.prt), 3D annotations are automatically created and are displayed in graphics zone.So, it is possible to create a ruled layer Notes_By_Hole (#Note by #Feature type #Hole). When this layer is hided, annotations are not displayedIn a second part (inh.prt), with inheritance of the first (ref.prt), annotations of holes are displayed => layer Notes_By_Holes is emptyIt is necessary that 3D annotations coming from threaded hole behave like other references (like axis in this example, with layer Axis_By_Hole)Workaround: MBD – Inheritance option to not copy all 3DNote
Currently, up to Creo Parametric 1.0, you can't add bulk items to simplified reps. This could be a simple but nice enhancement.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.