Recently active
1. Describe the Problem Creo Relations IF statements are missing ELSEIF or ELSE IF ability: https://support.ptc.com/help/creo/creo_pma/r11.0/usascii/index.html#page/fundamentals/fundamentals/Conditional_Statements_in_Relations.html Most languages have ELSE IF (ex: C# https://www.w3schools.com/cs/cs_conditions_elseif.php or C++ https://www.w3schools.com/cpp/cpp_conditions_elseif.asp) ELSEIF provides: Less verbose relations that are easier to read and write (see example below). Clear intent that only one of these IF, ELSEIF, or ELSE statements should be evaluated. Potentially faster evaluation of the relations. If one of the IF or ELSEIF statements are met, none of the remaining ELSEIF or ELSE statements need to be evaluated. Presumably Creo would use ELSEIF (without a space) to match the lack of space in the current ENDIF. Current workaround 1 (lots of separate IF statements): Not always clear if only 1 of the IF statements should be evaluated
1. Describe the ProblemModelCHECK is used to check for spelling errors in 2D drawings in Creo Parametric. However, the settings for ModelCHECK are controlled by administrative rights. Creo Parametric drawing mode needs to have a bult-in spell checker other than ModelCHECK or allow the end user to configure ModelCHECK for spelling without admin rights. 2. Are you using a workaround?No. There is no workaround to the admin rights.3. What is the use case for your organization?Giving the end user control over the spell checker will greatly enhance the overall quality of 2D drawings.4. What impact does this problem currently have on your organization?Cannot spell check drawings. IT department is understaffed to resolve the problem.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Design systems / assemblies to address client challenges - from initial concept to delivering final product. 2. What version of Creo Parametric are you currently running?83. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Unused models in drawings can only be deleted one-at-a-time from within the drawing and are only accessible from an old antiquated DOS-like menu. Unused models can accumulate from drawing revisions and if a drawing is copied and views are edited. You may not even know you have unused models that are taking up memory. And if you do know there are unused models in your drawing, it takes an inefficient use of effort and time to remove them. Modelcheck can be used to strip unused models from a drawing, but that's another step that shouldn't be necessary
Family table, "Copy instance to Generic" behavior is wrong. It prompts for "delete" action on feature If in a generic model i have a suppressed feature, in instance it is necessary to use * because creo will delete the feature in the family table and directly in the generic model tree. And if i have an active feature in the generic, using N on instance will delete features in the family table and directly in the generic model tree.Is it possible to activate boolean operation feature with family table when you want to use the feature copy instance to generic.If you want reproduce it : Open Part > Family tableSelect a feature as columnInsert Row > select "N" for feature Select instance row > Edit > Copy to genericThis fonctionnality is not working well and it is necessary to improve it.
Currently it is not possible to copy and paste special entire annotation features (with multiple elements) between different models, if there are surface references (for semantic relationship). Deleting the surface references enables the paste special functionality. It is possible to copy and paste annotation features with surface references within the same model. Proposal is to 1) Add a notification or prompt to user that CREO will automatically delete surface references upon pasting into a different model, or 2) Provide functionality to redefine references to surfaces (all solid surfaces for parts, discrete surfaces or quilts, discerete part surfaces etc).
It is necessary to provide the possibility of placing datum feature symbols on dimensional auxiliary lines of angular dimensions.This placement is already possible for linear dimensions. This is important for a reasonable use of the MDB and a fast and error-free generation of a drawing.
Currently you can not use a parameter in the additional text fields of a GTOL. If you try you will just get the text as you typed it and not the parameter value. See attached image for an example. This should work like notes, and virtually every other place within Creo. My main focus for this request if for model annotations but the same could apply to drawing annotations. This does not work in Creo 3 or 4.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Parametric (7.0.9.0, applies to all versions)2. What is the problem?I can open this model in an empty simp rep, open the simp rep manager, and create or edit a simp rep--all without loading any 3D CAD. But if I want to get past this screen, my only choices are to Open (saves the simp rep definition and opens it to the graphics window), Cancel (undos any changes I made), or Apply (opens it to the graphics window but does not save the edited simp rep definition). This feels like what was most likely an oversight in the original UI design and was just never properly addressed, I should be able to just press something like "OK" and return to the previous screen without being forced to load all those models.3. Are you using a workaround? If yes, please describe it.A full workaround is not possible. While you can modify simp reps from the model tree to avoid the dialog
Currently, the only way to edit a simp rep, and then save those edits, is to make the simp rep active. When a simp rep contains a large number of items in a large assembly, the entire model must be loaded into memory before the simp rep can be edited. Enabling users to edit a simp rep without activating it would save time and resources in cases where 1 item needs to be added to the simp rep of a large assembly. Then next time the assy file is opened to that simp rep the edits will become evident.
1. Describe the Problem User's must log in again when launching Creo View from an already signed in session of Windchill. The second login was not required with Internet Explorer. This is very frustrating for users to log in twice. 2. Are you using a workaround?There is no work around to making the user waste time log in to open Creo View from an already logged in session of Windchill. We have entered Case C17831347 with Tech Support for reference. 3. What is the use case for your organization?This applies to all organizations that launch Creo View from Windchill. In Internet Explorer version of Windchill and Creo View Interaction, User launches IE, goes to Windchill address and logs in. Finds a representation and uses open in Creo View and Creo View opens WITHOUT additional login. In Chromium Browser(Edge, Mozilla, Chrome), user launches browser, goes to Windchill address and logs in. Finds a representation and uses open in Creo View and is AGAIN presented with the same po
1. Describe the ProblemThe current capabilities of Creo Parametric support only the export of filled welds to XML, which can be utilized for programming welding robots. This functionality ensures that the filled welds are accurately represented and can be effectively used in automated welding processes. However, non-filled welds are not included in the export process. As a result, these non-filled welds cannot be utilized for programming welding robots, which may limit their applicability in certain automated manufacturing scenarios. This distinction is important for users to understand, as it impacts the overall efficiency and flexibility of the welding automation process.2. Are you using a workaround?Manual effort for the weld path generation, which requires physical components.3. What is the use case for your organization?Extending the XML export capability to include a comprehensive range of weld types would significantly enhance our efficiency in robot weld path generation. Curren
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 10.0.0.02. What is the problem?Lack of functionality3. Are you using a workaround? If yes, please describe it.None decent4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would use this function to generate a fully associative multibody part from an assembly file with the aim to generate the final machined part (1 item in our BOM) derived from a welded assembly.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It will help saving a lot of time spent by users in generating a shrinkwrap and obtain a better result.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO CREATE THE ASSEMBLY FROM MULTIBODY PARTYour reply is very valuable for me
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. All industries that create, edit and use sheetmetal parts in Creo Parametric. 2. What version of Creo Parametric are you currently running?Creo Parametric 7.0.8.0 up to 9.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. In Sheetmetal parts if dependent copy is selected in a new mirror feature, both partially and fully dependent options stay greyed out and are not clickable. Meanwhile in Modeling parts if dependent copy is selected in a new mirror feature, you can select either partially dependent or fully dependent. Note: this bug has existed since 2014 and has never been fixed: CS166281 - Mirror feature option "Fully dependent with options to vary" is grayed out in Sheetmetal mode in Creo Parametric Once a mirror feature is created i
Add a slot in the sketcher or hole wizard. Slots take way to long to make.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?I cannot select multiple adjoining surfaces from a quilt to offset. I am required to select the surfaces, make a copy then offset from that.3. Are you using a workaround? If yes, please describe it.Copying the surfaces, then offsetting them.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I only need to offset a few parts of a quilt and am not able to do so. When designing plastic injection molded parts, we use offsets very often to provide a uniform wall thickness as the thicken command is not adequate for most parts of the complexity which we work with. So we have to use the work-around which adds another feature and another point of model failure and adds more clutter to the feature-tree.5. What impact does this problem currently have on your
to allow box selection at all scenarios and for everything (including right to leftand left to right).
1. Describe the Problem Reference Ticket: C17501015 SPR: 15787581 We have had issues in the past when a step model from another tool has color information assigned to both sides of a surface. After Creo imports the model, managing colors is very difficult as Creo assumes color functionality is to the outside surface only. We then either can't remove the old colors from the model colors or it removes other colors we already assigned. One idea to solve this issue is: To give users more control over color assignment during import by introducing an import profile option that allows users to choose how colors are applied. By default, colors will be assigned as specified in the STEP file. However, users will have the flexibility to select an alternative behavior, applying colors to the outside only for solids. This addition aims to support diverse workflows while keeping the default behavior unchanged for consistency. 2. Are you using a workaround?We end up redo
1. Describe the ProblemFlow Analysis のドキュメントやチュートリアルで、ファンやプロペラなど、回転系の物が回転して液体や気体の流れを解析するものを作成して下さい。2. Are you using a workaround?サポートセンターなどから類似の動画を送って頂きましたが、説明がないので非常に分かりにくいです。3. What is the use case for your organization?ある容器の中に液体が入っており、そこにプロペラ(ファン)が回転して液体の速度が同じになうようなプロペラ(ファン)の位置や形状を解析するなど4. What impact does this problem currently have on your organization?回転系の解析が出来ずに試作品を作成するコストや時間が発生している。
1. Describe the ProblemNo way to make a chamfer based off a sketched curve like you can a round.2. Are you using a workaround?Using swept blends3. What is the use case for your organization?I need a chamfer that has lead ins and outs4. What impact does this problem currently have on your organization?Added time and features to create the same geometry.
1. Describe the ProblemGood morning,It would be nice if the dialog box inside a command could be enlarged according to needs.For example, the "Shell" command requires many selections and the current space in which the face selections appear is really limiting and uncomfortable.You could give the possibility to resize it at will and not fixed as it is now.2. Are you using a workaround?No.3. What is the use case for your organization?Usability.4. What impact does this problem currently have on your organization?uncomfortable
1. Describe the ProblemWhen assemble a component, if the value of "comp_assemble_start" is set to "strain_in_window" , a separate window appears immediately, but when an existing component is reassembled by edit definition , a separate window does not appear. I want a separate window appears immediately when I reassemble already assembled component with edit definition.2. Are you using a workaround?We have to manually turn on the separate window every time I reassemble.3. What is the use case for your organization?I want a separate window appears immediately when I reassemble already assembled component with edit definition, if the value of "comp_assemble_start" is set to "strain_in_window". There is no need to manually turn on a separate window, making assembling easier4. What impact does this problem currently have on your organization?We have to manually turn on the separate window every time I reassemble.
1. Describe the ProblemFrom an opened Assembly, we would like a new option that would Export an individual STL file for Each Part in an Assembly using the Assembly Coordinate System. For example, if the assembly is a plate and 4 bolts, the output would be 5 STL files. If each of these 5 STL files was imported into a part and then these 5 new parts assembled using the default coordinate systems, you would have the original assembly (but tessellated of course). The application for this enhancement is a downstream use outside of Creo. The name of this option might be something like Export every part per location in Assembly.2. Are you using a workaround?Within the Assembly, activate each location of a Part, create a new coordinate system in the part at the location of the Assembly coordinate system, open each Part, export STL selecting the new coordinate system(s). For example, if the assembly is a plate and 4 bolts, the bolt would have 4 new coordinate systems tha
1. Describe the Problem Right now the default round size generates a size based on the boundary box of the part. That's fine. The number it produces is not typically a manufacturing friendly size though. For metric sizes I would recommend that the default number be rounded to 1mm increments. For English units I would recommend that the default number be rounded to common fractional sizes. 2. Are you using a workaround?Yes, I update the default round size number every time I make a round.3. What is the use case for your organization?Would save training; save manufacturing costs so that a machine shop wasn't trying to mill in a .205 radius round.4. What impact does this problem currently have on your organization?This is more problematic for new people who don't have a manufacturing background to know to use standard sizes.
1. Describe the ProblemIt would be useful if in the 'planar section' command it were possible to select multiple references sufficient to identify a plane, such as 3 points, 2 coplanar axes, 1 axis and a plane with a parallelism/orthogonality constraint. This way, there would be no need to create a plane on the fly, which is then placed outside. Alternatively: making sure that the 3D dragger remains attached to that axis or point even after modifications.2. Are you using a workaround?1. Create a plane ad use it for cross section. 2. Use offset cross section3. What is the use case for your organization?When we want to create a section through an axis off a hole.4. What impact does this problem currently have on your organization?Greater chance of errors in the sections on the drawings, which should cut a hole in half but have not been updated following some changes.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.