Skip to main content
May 21, 2021 1:57 PM UTC
Acknowledged

Slots in sketcher or hole wizard

Related products:Creo Parametric

Add a slot in the sketcher or hole wizard.  Slots take way to long to make.

13 replies

May 21, 2021 2:18 PM UTC

Look at the Sketcher Palette when in sketcher. There are predefined shapes that you can use. One is called Racetrack that is a slot.

You can also make your own and add them to the palette.

May 31, 2021 12:45 PM UTC

Yes, and it will save your time and boost your design cycle time.

Aug 13, 2024 3:57 PM UTC

The sketcher palette "racetrack" is much worse than being able to select a slot option from the hole tool.  Slots are fast and easy in SW, PTC should catch up.

Community Manager
Feb 12, 2025 11:24 AM UTC
Status changed to: Clarification Needed

Thank you @NR_9770144  for publishing your idea and @PS_9535375 @kamleshjoshi @StephenW  for supporting it. However, we need more information as specified in the questions below. You may simply add a comment to your idea. The more details and context you give to document your idea, the better. Think about ways to educate and convince other Community members to support your idea and present your case to the product management team for consideration.

 

Commenters, please feel free to offer clarifications as well.

Please let us know within the next three weeks.

1. What version of the software are you running?.
2. What is the problem?
3. Are you using a workaround? If yes, please describe it.
4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.
5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)

Additionally, I invite you to check out this topic where PTC executives explain product managers' approach to customer ideas and input for product roadmaps.

Please see examples of well-documented ideas:

https://community.ptc.com/t5/Creo-Parametric-Ideas/Make-Shrinkwrap-quality-more-scalable-to-data-size-complexity/idi-p/810192 

https://community.ptc.com/t5/Creo-Parametric-Ideas/Option-to-Import-STEP-file-as-Inseparable-Assembly-by-Default/idi-p/812924 

https://community.ptc.com/t5/Creo-Parametric-Ideas/Eztol-Rename-action-not-synchronous-in-Eztol/idi-p/828000 

https://community.ptc.com/t5/Creo-Parametric-Ideas/Always-enable-ability-to-Add-View-Label-in-a-drawing/idi-p/837630 

Feature parameters can be input and changed togeth... - PTC Community 

Feb 13, 2025 4:31 PM UTC
Status changed to: Clarification Needed
Hi, thank you for following up on this suggestion. I hope the info below helps clarify this issue for you.

1. Creo 9.0

2. Slots are a common design feature. Often as a part is designed, holes will be changed into slots or vice versa. Creo's tools for slot creation are terrible. There are too many clicks, there are too many submenus, and since the slots are based on the "racetrack" sketch, they have no connection with standard hole sizes. Creo should allow designers the ability to switch between slots and holes in the same way that it allows users to change between blind and through holes, or counterbore and countersunk holes. Take a look at Solidworks' "Hole Wizard" tool if you need further clarification. This tool includes options for slots and counterbore slots, just as if they were subtypes of holes, which for design purposes, they are. Try using Solidworks' slot creation method, then go back and make slots in Creo and the problem will be self evident.

3. The workaround is to use Creo's slow and cumbersome "racetrack" palette sketch nonsense.

4. Every part that has slots machined into it would be faster to design. Changes would take seconds, not minutes. Since slots are basic design features used across all manufacturing industries, this would improve productivity not only for us, but for every single Creo customer. If your software makes people's jobs easier, more people will like it, more people will praise it, and your sales and revenue should increase.

5. Lost productivity through cumbersome and slow design tools is hard to quantify, as is lost time by filling out lengthy product suggestion paperwork.

Feb 18, 2025 9:32 AM UTC

You can make your own arcslot in sketcher palette and control the way you like. I do this all the time with my preferred dimensions and control. 

Feb 18, 2025 9:45 AM UTC

I have also used the same, however direct command will be useful as it will guide the user properly while creation of slot.

Feb 18, 2025 4:59 PM UTC

Another alternative option is to create all of your standard slot sizes complete with tolerances, annotations, parameters, relations, datums, etc. on a simple part. The features making up the individual slots can be grouped and the groups named logically [groups are helpful when the geometry needed requires multiple features]. A descriptive label can also be placed near the slot to aide in selecting the proper slot. We call these parts "coupon" parts, and we have them for standard holes, connector cutouts, etc.
When you need to use a standard slot feature, you open the coupon part and use copy/paste on the slot feature or group. The opening of the coupon part can be automated with a simple mapkey.
The coupon part can also be used to create UDF's of the various slots as well.

You can also include information in the features/groups to aide in manufacturing, etc. For example, if you have a standard punch for creating your slots, you can include parameters/notes stating on which punch the slot was defined/designed, so the manufacturing folks can select the proper punch.

Regards,
Dan N.

Community Manager
Feb 25, 2025 1:18 PM UTC
Status changed to: Acknowledged

Thank you everyone. Based on the information you provided, we are acknowledging it as the Community management team. This is not a commitment from the Product team. Other users may comment and vote your idea up.

Feb 25, 2025 5:44 PM UTC

Thanks for the feedback on slot workarounds presented above.  All of these suggestions are far more work than simply having a built in slot tool.  Would anyone find it reasonable to have to go to all the work to create UDFs/coupon parts, etc. in order to make standard holes?  Also none of these suggestions account for design changes in which slots become holes or when holes become slots.  A slot option in the standard holes tool, similar to what is provided by Solidworks is a far easier solution.

Feb 25, 2025 6:16 PM UTC

@PS_9535375 I doubt anyone is saying that your idea is bad and the work-arounds are best. The users that are commenting know that if this change is made, it won't be anytime soon (this is based on our experience with PTC). So, they are simply trying to provide alternatives to make your life easier while you wait patiently for the idea to be implemented, but you will likely need to be REALLY PATIENT, they aren't fast!