Recently active
Can annotations and dimension text "boxes" act like relations? While in annotations, click on the feature you want to reference. The dimensions and parameters for that feature show. Then you click on what you want to add to your annotation and it autom
Today, SI-based devices and prefixes are not in use.See the example in the attached picture.Suggestion: Change MM^2 to mm² Change MM^3 to mm³Change MM to mmChange KILOGRAM / MM ^ 3 to kilogram/mm³ or kg/mm³and so on. M= mega = 1 000 000 m= milli = 0.001 This is a quite big issue for engineers from whole world outside United states. Also see: https://en.wikipedia.org/wiki/SI_base_unit https://en.wikipedia.org/wiki/Metric_prefix Best Regards Per Forsman per.forsman@strongpoint.com
It should be possible to generate corner radius, like the image bellow. At the moment creo has the ability to generate a corner sphere radius. But it should be usefull to generate a simillar quality radius setback. https://www.youtube.com/watch?v=P57yWtDxlxA
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We design and manufacture high-end electronics. I am the CAD Manager / PTC SME. Stakeholders for this idea include our Creo user community. 2. What version of Creo Parametric are you currently running?8.0.4.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. Reference: Article: CS366849 Case: C16336356 SPR: 13742708 In a typical parametric assembly, if a component is placed using a surface or datum, and then the component's surface or datum is changed, it will automatically update the placement. Apparently this is not true for some use-cases regarding import of EMN/EMP data (from the IDF standard of ECAD MCAD Collaboration). This makes the functionality not parametric in a parametric tool. And there is not even a notification to the user. Even an advanced user would not think that t
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?8.0.8.0 2. What is the problem?Reference ticket: 16962068 The ecad_hint.map file is being used as the default information to map our components (mostly as assemblies) while EMN files are being read out and written into Creo. However, if the design data is using a slightly different variant of the ECAD_NAME, Creo will STILL export using the name in the ecad_hint.map file. This should not be! It should use the name in the design file itself. Whenever the ECAD tool opens our EMN file, it gets flooded with warnings saying that the package name has a mismatch. We can't remove the component from the map file because we need the map file to map to the correct assembly model. If we put a wildcard ECAD_NAME "*", the ECAD tool still generates a warning: The PCB designers can't read through hundreds or thousands lines of their warning log, trying to fin
In Creo Parametric cabling it is not possible to add a electrical or customized parameter in the designation window like it's given e.g. in the Electrical Parameters window. This functionality is essential to identify two or more identically connector part numbers with unique positioned X numbers. The idea is to add the column "description" to know which function has the connector and the to decide which has to be designated. Or any other additional information which was included from the imported ECAD formated file, like Mentor file, XML or nwf. See the picture how it should be and how it is possible in other cabling electrical windows
1. Describe the ProblemAfter a Pro/TOOLKIT DLL has been compiled and unlocked successfully using protk_unlock.bat and will be digitally signed afterwards (these steps are described exactly like this in the Pro/TOOLKIT user guide), the DLL looses the "unlock" state and the popup "... has not yet been unlocked before distributing to your site..." comes up.(This issue is already described in article "CS200080" with "No plans to Fix" in further Creo releases).Recommendation: Remove the described possibility from the user guide if it's not possible to digitally sign the DLL or implement a fix for a further release.2. Are you using a workaround?The current workaround is to NOT digitally sign the Pro/TOOLKIT DLL.3. What is the use case for your organization?If it would be possible to digitally sign our application extension, we could ensure to the user that he's running a reliable extension. Furthermore we could ensure that it hasn't been manipulated by third parties using security check prog
1. Describe the ProblemIn some cases (e.g. for the repeat-region) it's necessary to reorder the columns in the family table, e.g. after some columns have been deleted and new ones added.Several automation tools are used to help the users to work with Family Tables using Pro/TOOLKIT. But currently there is no function similar or equal to the "Swap Columns" function from the GUI in the Creo Parametric Family Table.A Pro/TOOLKIT function that works similar to the ProParameterReorder() would be also helpful (or even better), where the parameter that comes just after the indicated one and can be passed to the function.2. Are you using a workaround?To reorder the columns, specific columns need to be deleted completely (while the content has to be stored programmatically) and inserted again in the correct and needed sequence.3. What is the use case for your organization?When the user works with Family Tables and display it on the drawing, the columns need to be visible in the right sequence (
1. Describe the ProblemCreo can import OBJ meshes to its environment. However, the usage is very limited and does not support Textures. Features like ones found in Meshlab (open source) to remove, clean up and visualize meshes would be greatly appreciated in Creo Parametric.2. Are you using a workaround?The OBJ file can still be imported. Albeit it is much more difficult to recognize what is what when no textures are available. We still must use more traditional methods for gathering information.3. What is the use case for your organization?With new smartphones today, 3D scans from production lines or machines can be collected with very little effort. These scans provide valuable information for existing environments. For example: Distances for piping planning and obstacles to take into account on a digital environment. For Brown field implementations, having the 3D scan overlaid with the engineering proposal greatly simplifies the design process. 4. What impact does this pro
1. Describe the ProblemGeometry with features option is not available in : Mirror Assembly User Interface when performing >File >Save Mirror Assembly from top assemblyGeometry with features option is intended to be available only when mirroring a part but we have assemblies with 100s of parts in them creo offers the ability to detect parts in the assembly that will need to be mirrored due to asymmetries but doesn't allow the ability to mirror those PARTS with features (even though creo already clearly has the ability to do this you have to do it on each individual part individually instead of doing it in bulk like this) this could even be added to the advanced settings page (accessed through the save a mirror assembly dialog box) as a column in the tree where you could toggle mirroring each part with just geometry or geometry and features2. Are you using a workaround?instead of mirroring large assemblies all at once we are m
1. Describe the ProblemWhen using family tables to manage product variants of different geometric size, eg. height/width variants, the quantity needed for a bulk item, e.g. glue or paint will often depend on the actual size variant.So there is a need to control the value of BOM_REPORT_QUANTITY individually for each instance in the assembly family table.However, Creo does currently not support that is explained in https://www.ptc.com/en/support/article/CS214511"BOM_REPORT_QUANTITY" can be driven from bulk template or bulk component only to avoid conflict of drivers for this parameters.Please consider resolving this constraint to allow the same variability for bulk items as for other types of components in family tables.2. Are you using a workaround?We are using an "overloading" methodology for family tables with few instances, where a bulk item for the same material is created or assembled into the generic assembly as many times as there are different quantities nee
1. Describe the ProblemNeed option to excluding weld features in a Simplified Representation, it will reduce model size while working very large assemblies like vehicle design2. Are you using a workaround?No3. What is the use case for your organization?Number of weld features are more in vehicle design, It is very slow while working assemblies and regeneration time is more. So we need excluding weld features in a Simplified Representation but there is no option currently in Creo parametric4. What impact does this problem currently have on your organization?It is very slow while working assemblies and regeneration time is more. 50 designers are working in my organization.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Aerospace industry, I am a design engineer.2. What version of Creo Parametric are you currently running?I'm currently running Creo 7.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I want to be able to use a custom BOM Balloon that also displays QTY. I currently leverage a repeat region and have to have 3 separate symbols: One with the QTY on the left of the balloon, one with QTY on the right of the balloon, and one showing no QTY (for components that only have 1X qty). It would be great if Groups could be leveraged in BOM Balloons, so that I could create one symbol where all QTYs exist, and then select in Groups which one I want shown in the symbol. I'm not sure why Groups cannot be used with BOM Balloons specifically, but can use them in other custom symbols? In this conte
1. Describe the ProblemIf we create a cable in an assembly, we draw it and produce it: we have no way to reuse it in other assemblies, with the same connectors, the same spools, the same length, the same drawing, the same code. The workarounds you propose are uncomfortable and not very applicable. A specific function that allows you to define reusable wiring would be useful.2. Are you using a workaround?No, they are not applicable in our case3. What is the use case for your organization?For cost optimization we would like to reuse already designed and produced cables in other assemblies.4. What impact does this problem currently have on your organization?Our cabling license remains unused and we cannot insert pre-made cables into new assemblies.
1. Describe the Problem Implement an option to immediately release borrowed license under Creo menu "File/Options/License" as is on my attached picture. 2. Are you using a workaround?Manually running command prompt and looking for the correct values = pain for common users3. What is the use case for your organization?Users are forced to use command prompt which is complicated and not user friendly. For many of them is not easy to properly input all details into: "lmutil lmborrow -return -c 7788@licenceservername PROE_license_name"4. What impact does this problem currently have on your organization?We need to avoid problems during license borrowing.
Hello, Many users are requesting the possibility of having a new feature for oblong holes. At the moment creating a simple hole is very easy and customizable. But creating an oblong hole require more time : 1 - creating a cutting extrude 2 - sketching the oblong shape, or importing it from sketcher palette... But still longuer than having a dedicated "Oblong Hole" Feature Inside of Creo Parametric.Thanks in advance.
1. Describe the ProblemThe 3d model detail options default_thickness_dim_prefix and default_thickness_dim_suffix doesn't works for shell features. Could be useful that they works also for them.2. Are you using a workaround?Yes, In drawing I add a dimension manually or I change prefix/suffix manually.3. What is the use case for your organization?Every 2D drawing that we do.4. What impact does this problem currently have on your organization?10 sec every thickness dimension that we have.
Very confusing interface.Needs lot of learning and practice to use.Improvement needed is : It should be as simple as Excel or equivalent.1. What product and version are you running?I use Creo 9 and Creo 10 both. Have used all ProE and Creo versions starting from ProE WF-32. What is the problem?Creating and editing BOM Table takes lot of time. Being an old Pro user, we can manage it.But new Users does not like the old school method of adding and editing tables in Creo. New Users are more familiar with the new intuitive UI based and dropdown based editing rather than selecting options through Menu manager. They always compare it with Solidworks BOM table.Even Autocad now has improved the table creation. In Creo it is still the same older method and no improvement after this many years. BOM is something where engineers spend most of their time and it should be easy and fast, mostly for new beginners. Because Pro-users are not immortal 😁. They will be repla
1. Description of the ProblemFor surface finish annotations, we are currently using the ProSurffinishValueGet() function to retrieve the associated property.However, we have observed that depending on the symbol type (e.g., ASME or ISO), the function does not return the expected values. Specifically, the roughness_height field is not available in some cases, and other fields such as surface_texture_requirement may contain only text values.Would it be possible to obtain the roughness height value (as a double) directly from surface finish annotations, such as those shown in the attached image?Additionally, we would prefer an API that is specifically designed to access this data, rather than extracting it from general symbol instance properties.Below is an example of a surface finish symbol where the function fails to return the expected value. 2. Are you using a workaround?No, we are not using any workaround at the moment.3. What is the use case for your organization?We need to val
1. Describe the Problem I would like the ability to change the light blue display color when selecting "Model" in the results display.There is no color scheme, so the color cannot be changed, making it difficult to see. I can change the other display colors, but I cannot change this color. 2. Are you using a workaround?Checking the shade box makes it a little easier to see, but I'd like to see it in wireframe as well.3. What is the use case for your organization?Use this when you want to check the deformation state.4. What impact does this problem currently have on your organization?Inconvenient for some users
1. Describe the ProblemWhile merging Harness Part2 with Harness Part1, the network from Harness Part2 to Harness Part1 moved, but the network continuity is not established.ASM 1 Harness Part 1ASM2 Harness Part2We expect to have network continuity while merging the Harness parts,2. Are you using a workaround?Currently, the network location is manually merged.3. What is the use case for your organization?Due to the diversity of products, we will create multiple harness assemblies and merge them later to calculate the overall length of the cable. In this case harness part should have Network continuity.4. What impact does this problem currently have on your organization?Our objective was to have a single harness assembly component for the vehicle product.
1. Describe the ProblemMerge harness, when connectors are in the Group, is not moved to the Active Hereness ASM.ASM 1 Harness Part 1ASM2 Harness Part2 Group (Connectors are in the Group)For example:- With the above Test DATA Structure, while merging the Harness Part2 with Harness Part1, the connectors from ASM2 Group are not moved to ASM1. 2. Are you using a workaround?Manually user must move all the connectors from AMS2 to ASM1 in this scenario.3. What is the use case for your organization?Due to the diversity of products, we will create multiple harness assemblies and merge them later to calculate the overall length of the cable.4. What impact does this problem currently have on your organization?Our objective was to have a single harness assembly component for the vehicle product.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?CREO 8.02. What is the problem?Our company is in the early phases of implementing MBD. One of the issues we are finding is that we can not change the "start part" template for already existing parts and assemblies, which means we have to create all the combination states (following MIL-STD-31000) for each existing part. For new parts, it should not be an issue if we change the company "start part" template to match the MBD "start part" template, but for older parts it is a pain to have to recreate all the combination states, unattached notes, title block, etc.... Can we please create a way to either:1. Copy a part (Save as) and give the option to change the start part. OR2. Be able to import combination states with all the notes, title blocks, etc.Both options seem better that recreating all the combination states from scratch for existing parts.3. Are you using a work
1. Describe the ProblemThe annotations are important for mold manufacturing team. And the parts are assembled using the coordinate system form the mold not the default. It is important to be possible unable the annotations option on the export step and an the same time, using a non-default coordinate system. 2. Are you using a workaround?Export to pvz and install creo view on the others departments to see the annotations and export also to step withot annotations to choose the coordinate system.3. What is the use case for your organization?Turn the non-default coordiante system when exporting the 3D file with note to step.4. What impact does this problem currently have on your organization?Do not export a second file and install the creo view to others departments. Only the step file is created and send to others departments.
1. What version of the software are you running?Creo11 2. What is the problem? An offer to the CREO developers to add a search function to the menu of playing the toolpath by NCL-file (Manufacturing). This function is very useful for postprocessor developers and search for specific strings of NCL-file in the play menu. The problem is in the analysis of the postprocessing result.After postprocessing the ncl file and subsequent analysis of the *.lst file, it is sometimes extremely difficult to find the problematic CL record found in the *.lst file in the toolpath playback interface (graphical representation of the trajectory). For example: It is necessary to examine the CL-record in the *.lst-file after postprocessing2321>GOTO /-24.61144,20,-75.18996,0,1,0which is presented by the postprocessor as a sequence of blocks:2321 2322 2301 CC X12.632 Y108.216$2321 2322 2302 C X-24.611 Y75.19 DR-$ It is necessary to find this CL-record2321>GOTO /-24.61144,20,-75.18996,0,1,0when play
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.