Recently active
Greetings all,i am looking for a summary of what's new in Creo 4.0. document. I do have presentations from the sneak peak one from Liveworx, i want to know if the is a summary of list of all the new functionality.
Hi..I am not able to get much more information about new things of pro-piping in creo4.0, so please can someone send its video or userguide or other related doc.i just got one document from this forum but not getting what exactly new things in this.Thanks,Prashant Pandarkar
I often received request from Marketing, Legal and other departments to do very unusual things on the drawings. For instance:-Highlight text, Highlight views, add images, add stamps, add coments, and so on. Therefore I switch to PDF or CreoView for those request.So I think having a full Markup tools straight on Creo would be interesting. And the markups could added to a layer to keep it organized.
I have used the variable section sweep, creating a trajectory and a simple line in the sketcher with the trajpar variable. After closing the feature, itis not possible to edit the value of sketcher line. To change the value, I must go back into the sketcher. The variable of the features can be changed.
Denis,Why are you concerned about the arrow?
Denis,The four interfaces represents the four contact zones (shown below).1. One contact between the glass and the support2. Three contacts between the glass and the rounds on the support.You can rename the contact zones.The arrow in the middle is the icon for a 1g gravity load (shown below).
Adding Warp.Welcome to the forum.
Brian,I think you want to create a pipe as shown below. There are several ways you can make this. Since you already have the curves, you can select the desired curves with the Project icon as Martin suggested. Or you can create the curves in Sketcher Mode, as I did below. Either way will work.Now trim the unwanted curves.
Marco,You change the units to MPa (mm-N-s) for the linearized stress report in the model properties before running the analysis. The below report has units of MPa.
This is an example showing the new core/cavity design workflow in Creo 4.0. The user can create mold volume directly with the classified surfaces on design model plus parting surfaces (view in My Videos)
Document - CS222750 Document ActionsRefresh DataSubscribe to this Document Share by EmailDocument InformationTypeArticleDate Created 12-Nov-2015Date Last Updated29-Jul-2016 Document DetailsTitleConfiguring the PTC Windchill extension for ThingWorx and IIS DescriptionApplies ToThingWorx 6.5CauseResolutionThis text goes into the PTC Windchill® Extensionfor ThingWorx® Guide: Appendix A “Example Configuration Using SSL for Secure Communications”; and replaces the existing step 9. Configure Windchill to trust ThingWorxExport the ThingWorx certificate from the ThingWorxKeyStore.jks. Export in pfx format making sure to specify a passwordAdd the ThingWorx certificate to the Windows Servers list of trusted CA Certificates Click Start, and then click Run....Type mmc, and then click OK. The Microsoft Management Console (Console) window opens.In the Console1 window, click the File menu, and then select Add/Remove Snap-in.In the Add or Remove Snap-in window, select Certific
The attached file provides details on what is new in Model check
Good morning:Now with Creo 4 It is possible to put additionsl texts surrounded with a box in the geometric tolerances, but the option only appears for up and botton texts, not for rigth and left texts. Are the options for boxed text on the right and the left to be included in future versions? Besides, the box and the text don´t appear together. Is it a bug to be solved in F000?Thank you for your attention, best regards,Nekane Peña
Starting at Creo 3.0 M040, we can import the copper tracings into Creo, this is great, but still cannot import silk screen info from ECAD software.I want to know whether there is a plan to import support PCB board with silk screen from ECAD software
Could you please share inforation about What's new in Creo Elements/Direct Modeling 20.0 excluding enhancement about data exchange for Creo Parametric 4.0?
"Over 50 standard material within the standard install" in "PTC Creo simulate 4.0Technical Update" presentation, after check material library, there are only 20 old material, no other new material file, these new 50 standard material are available in Creo 4.0 F000 only?
mold design bug in Creo 4.0 sneek peek.image attached ,creo 4.0 file attached.
Nice work.
During my testing I noticed that Iam unable to find an option to attach a GTOL datum (B) to a dimension.In earlier release of Creo, I would RMB on the datum, select Properties and in the properties dialogue box i can select placement as In Dim.But in Creo 4 there is no option. Please let me know if there is a way to do this.
What two responses? What specific results are you looking for?
When I try to create a note on the drawing, after adding any Symbol from the symbol list, any text entered appears as blocks or boxes.The same thing if i try to type in a dimension there is no issues.Is this something others are experiencing?
Creo 4.0 interface is looking good, but I think they could add a check box for Reference dimension as they do for Basic or Inspection. It adds functioanilty and time saver. Could I program that using Tool Kit?
I have consistently got a fatal error with Lattice Features whenever I set the Profile Type to 'Parabolic' (see screenshot below). This may be a bug that should be worked out.If you want to recreate it, set the cell size to 4 (for X, Y and Z) and change the Profile Type to Parabolic in the attached part file.
Hello,Whenever I define Lattice features, I usually cannot run it with the full geometry in Creo Simulate because AutoGEM chokes on the geometry, and when I use the Simplified Geometry, and run a sensitivity analysis, I routinely (not every time, but most times) get any one of the following errors below and the run crashes:Error updating parameters:The requested shape change failed because it results inthe deletion of the highlighted geometry. This geometry hasan association that cannot be deleted.** Warning: Unable to recover from invalid design point for the following parameter values:Error updating parameters:The requested shape change failed because it results inthe deletion of the highlighted geometry. This geometry hasan association that cannot be deleted.Error: The highlighted element edge i snot associated with the highlighted curve. You should examine this region of your model for potential modeling errors.The m
When you make a drawing in Creo Parametric, you select New > Drawing (not Detailing) as shown below. And there can be various types of drawings, such as Production Drawings, Assembly Drawings, Detailed Drawings, etc., but the bottom line, it's called a drawing. So the Product Idea was suggested for this area of Creo Parametric.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.