Recently active
In a little over a month, the city of Nashville will welcome thousands of product development professionals for a unique training and networking experience (and we hope some fun too).More than 350 companies have registered their mechanical engineers and engineering IT professionals. If you are still having a hard time getting approval for your trip, let us share these 5 unbeatable tools with you. We’ll be posting one tool every day this week, so come back daily for new resources to use with your manager.The First Tool: The "Top 10 Reasons to Attend" ListFrom receiving first-class training to getting inspiration from innovative customers, we’ve extensively explained each of the top 10 reasons why you should attend in these series of blogs:Reason 1: So many reasons to attend PTC Live Global... where to begin?Reason 2: Googled out? - PTC product experts will help you find the answers at PTC Live GlobalReason 3: Get the inside scoop on future product capabilities at PTC Live GlobalRe
Erik,There isn't a way to turn this off with a config option. If you try the config option display_coord_sys and set to No, it doesn't effect the post-processing results. I checked with PTC Technical Support, Case C1256637.
Erik,You're talking about turning off the Coordinate Systems in the Visibilities window permanently with a config option (shown below). I don't know if any way to do this, as I have searched for it myself. I can call tech support, and if there isn't a way to do it, then a Product Idea needs to be submitted.
If you just want to send 3D files that don't include modeling history, you could save the files as Creo View files (.ed, .edz, .pvs,.pvz), and they can view with Creo View Express, which is free viewer from PTC.
It is recommended to add Units for the model tree columns. When dealing with assemblies, the end user will be able to see if all the units are the same at-a-glance. This will be very beneficial when obtaining assemblies from other users, as sometimes not all components in the model tree will have the same units. Currently, Creo does not have this capability (PTC Case #11906045).
There are many lessons in the attach link.http://learningexchange.ptc.com/tutorials/listing/product_version_id:44
Are you refering to the method in the attach video?http://learningexchange.ptc.com/tutorial/456/using-the-draft-analysis-option
Nice work.
Damian,Glad it worked out for you. I've been so busy, I haven't had time to dig into the problem. If beams didn't work for you, I was going to mention using shell elements instead of solid elements, if you wanted to keep the fasteners in the joints (if fastener analysis was a requirement).
When Lanorra Sena joined Los Alamos National Laboratories, she signed on to administer the new installation of PTC Windchill PDMLink. With 1600 users, she expected to work full time overseeing updates, security, etc. What she didn’t anticipate was that she’d also have to administer the Oracle database while the search for a new DBA was underway.As many PTC Windchill PDMLink administrators can relate to, sometimes they are asked to wear many hats. One of the many hats that Sena had to wear early on was that of having to manage the production Oracle database, with little to no previous experience.This year at PTC Live Global in Nashville, Tennessee, first-time presenters Julio Aguilar-Chang and Lanorra Sena aim to help PTC Windchill PDMLink administrators—and anybody else—that suddenly find themselves in a similar situation. Their session, “Oracle Database Administration: Tips and Techniques for the PDMLink Administrator,” covers what you need to know to keep the system running whe
Ryan Kelley or Toby Metcalf, Curious if either of you would have the ability to get student and evaluation versions of Creo into the hands of the Champions who already own the full versions of the same software. The inability to open files created in the student and evaluation editions with the fully licensed versions really limits our ability to help people. See this: Re: Family Table BOM Balloon - PTC Community P.S. You really should add "Creo" and "Windchill" to the built-in spell checker.
Justin,Are you wanting to send a 3D model that can only be viewed without any of the features that was used to create the model?
Damian,This is an extremely large model for FEA. Do you think you'll have the RAM and disk space to run this? Yes, I downloaded it.
I'll be out of the office tomorrow.
Damian,When you zip the assembly, you have to include all the subcomponents. It may be better to build this with the beam element tool, if you're only trying to get the weight rating for the structure.
Hi Damian,The first thing I noticed is this is a huge model in terms of p-elements. You've got more than 197K elements, and more than 66K nodes. You have a load on a curve that is not associated with any elements, as this can be seen in the original post. If your model is not proprietary or classified, upload it, and I'll take a look at it. There just seems to be too many elements, too many problems with this assembly. What kind of results do you want out of the analysis? And are you running a Student version of Creo?
Whenever you're dealing with a lot of components for FEA (especially contact), start with a small assembly for meshing, then keep adding to the assembly. I would recommend going back to Parametric and suppressing all but the two components that won't mesh. You want all of the geometry to mesh before you start adding a lot of simulation, so you can suppress all the simulation features in Simulate and then resume them later. But first, get the geometry to mesh.
Damian,Go to the Diagnostics window and select File > Save As and save the file. Can you then upload the entire diagnostics file for us to look at? There's something wrong with the geometry, and if you will select on the identified errors, it should tell you the problem.
I don't think there is an config option for this, but I like the clean look of not having plane intersections, as they would just get in my way. However, you could submit this as a Product Idea.
Nathan,Move the cursor over small white square (circled in red) until it turns black. Now RMB and select "trim at". Select the curve to trim to.
You can get some description on that line up to 31 characters as shown in Figure 1 below. The full material description should be in the material definition window as shown in Figure 2.Figure 1Figure 2
Good day everyone,Thank you for attending and the great Q2.The deck is attached with audio to follow; please post any follow up questions or comments here.Best,Toby
Patric,Welcome to the forum. You want to be able to add material to the pipe while keeping the holes the right distance from the ends of the pipe? The best way to do this is with relations. I've attached some images to help facilitate visualization. When you create a double sided blind pipe, go to the Feature Information for that extrusion, and you will see some parameters, such as d0, d1, etc. When you make the holes at the end of a pipe, make the dimension for that hole from the datum plan with relations. The example I used is I want the holes to always be 0.5 inch from the ends of the pipe. When you place the pins in the holes in the assembly, you will have to make sure the pins are constrained with the hole so when you change the pipe length, the pins will move with the holes.
Sketch a circle in PTC Creo and extrude it, and the system automatically generates a center axis for you. But what about squares and asymmetrical shapes? In that case, you can simply specify a point on the extrusion, and the system will create the centerline. It’s not a difficult task, but the key command you need may not be apparent if you don’t know what to look for.This year at PTC Live Global in Nashville, Tennessee, PTC Creo user, Ron Rich, will address how to create a center on a non-cylindrical extruded feature as part of his talk, “10 Simple Tips and Tricks.”Rich, who’s been using PTC CAD tools for 25 years, says even after all this time, he still finds useful features in the software every few months, and he’s using this presentation to help you find them too. “This isn’t a ‘What’s New in PTC Creo 3.0’ session,’” he says. “This is a wake up call, showing what you already have and how to use it.”Creating a centerline on a non-cylindrical featureHere’s how you create that center
Just try to drag and drop.Sometimes it is over stuff you want to select or in other cases you need it closer to the 3D-ModelNow it moves:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.