Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.02. What is the problem?Currently, rendering modes can only be changed on an entire model basis.3. Are you using a workaround? If yes, please describe it.No workaround. We are using as the intended behavior.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We need ability to individually set rendering modes for each part in order to have more visual emphasis or analysis by changing specific parts during work to transparent, wireframe, or shaded.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is at a pilot phase with limited users for Creo Illustrate at this moment. If this idea is implemented, the customer will purchase more licenses of Creo Illustrate for expansion.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.02. What is the problem?It takes longer time to add an image stamp by clicking many menus. e.g. File > Options > Illustrations > Stamps > Add, This is very cumbersome and time-consuming from users’ perspective.3. Are you using a workaround? If yes, please describe it.No workaround. We are using as the intended behavior.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We need a simple image capture and instant stamp creation feature that allows you to capture an image right during work and quickly insert it as a stamp.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is at a pilot phase with limited users for Creo Illustrate at this moment. If this idea is implemented, t
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 9.02. What is the problem?Creo Illustrate does not allow the users to set a background color of a note box for transparency3. Are you using a workaround? If yes, please describe it.No workaround. We are using as the intended behavior.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The idea is to allow the users to set a background color of a note box as MS PowerPoint supports. Creo Illustrate also would have an option to set the background color of note boxes. This will bring more visible transparency to allow annotations to be placed without obstructing the view when working on drawings or illustrations,5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It is at a pilot phase wit
1. Describe the Problem Hi Creo provides a helpful list of recently opened files, which allows quick access without repeatedly navigating through the file system. However, when selecting a Working Directory, the user must manually browse to the desired folder every time. There is no option to choose from a list of recently used directories, even though switching Working Directories is a frequent and repetitive action. In my estimation, adding such an option is not complex, yet it would provide significant value to all users. 2. Are you using a workaround?The only available workaround is to create Windows shortcuts or use the Windows Favorites section to store commonly used project folders. Another option is to start Creo directly from a specific folder. These workarounds are external to Creo, not integrated into the user interface, and they are not practical when switching between multiple project folders.3. What is the use case for your organization?Our team works on several proje
1. Describe the ProblemWhen working with large assemblies, it is easy to perform a search operation that exceeds 14000 items. Creo currently just gives you that subset and there is no way to find the additional items above this. User has to resort to starting from lower level subassemblies to reduce each individual search action. This limit applies to searching for anything.I am running into this repeatedly for large assemblies transferred into Windchill from Elements Direct when I search for coordinate systems. I need to hide all the crazy coordinate systems that come over unhidden, but if I cannot find them all in one shot, this process becomes tedious.2. Are you using a workaround?Work around is to select all the first level subassemblies, one at a time and search those separately. For particularly large subassemblies, even those might run into the 14000 object limit and going a level deeper is needed.3. What is the use case for your organization?After checking a large Elements
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?More CV versions2. What is the problem?When I report installed version of Creo View on hundreds of client workstations getting wrong version info.Control Panel/Installed SW shows that Creo View version is installed as version 12 but column "Version" shows 19. What I get when reporting is that nonsense with version 19.Funny is that Creo versions are correct. Why PTC cannot keep the same logic for Creo View as well?3. Are you using a workaround? If yes, please describe it.Have to decode that "CV 6" is version 13 and "CV 12" is version 19 for example.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Getting confusing info during SW updates.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Wasting of time.
1. Describe the ProblemIn a drawing that details more than one model, such as an assembly with two configurations, the repeat region cannot handle it, with two major disabilities and one minor.No BOM balloons. According to CS102227 you cannot create BOM Balloons for a repeat region using column models. You have to create them by hand, and then they are not parametric.No bulk items. The quantity for bulk items is shown as 1. You cannot alter it with relations and show it as "AR" (As Required), you have to place a note over the 1 to hide it in the R. This is the kind of fakery that we are trying to avoid and should not rely on as a best practice.Adding columns on the edge of a repeat region puts them outside the repeat region. You have to add them inside the edge column, which makes expanding an existing table unnecessarily complicated.Here's an example. But in this example, the workaround chosen was to add a dumb text column to the left of the repeat region, and several more rows of dum
1. Describe the ProblemDisabling assembled component on reference pattern seed feature is impossible.2. Are you using a workaround?Simple reps can be used to workaround in some extent.3. What is the use case for your organization?To be able to use reference patterns for example for fasteners and plugs and being able to freely disable any fastener or plug when creating product variations.4. What impact does this problem currently have on your organization?10-20 users affected. Reference patterns cannot be used effectively. Hours lost yearly around 20 hours.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. We work for Schneider Electric multinational company that specializes in digital automation and energy management. My role in the organization is Mechanical Platform Solutions Architect and our stakeholders are all of our Business representatives who spoke for all company designers.2. What version of Creo Parametric are you currently running?Creo Parametric 8.0.23. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.we have a model check configured to review and mark an error if a flexible modeling feautre is present.however there are use cases where we have imported model coming from neutral files or other CAD systems and we want to apply a condition if an imported feature exists it does not mark an error if flexible modeling are founded.there is a similar functionality w
1. Describe the ProblemIn Creo Parametric it can be helpful to have a common required block of relations to drive company standard attributes or calculations. For normal relations and comments ModelCHECK will only check for the existence of a relation or comment. There is no position check. (For solve blocks ModelCHECK does understand order dependance). 2. Are you using a workaround?Manual Checking3. What is the use case for your organization?Checking of models prior to release for compliance to company standards. I want the relations to look like /*Begin Required Common RelationsCDA_CAGE_CODE=CAGE_CODE/*Comment About Contract Number Should Be BelowCONTRACT_NUMBER=CONTRACT_IDENTIFIER/*End Required Common Relations But this will pass /*Begin Required Common Relations/*Comment About Contract Number Should Be Below/*End Required Common RelationsCDA_CAGE_CODE=CAGE_CODE/*Comment About Contract Number Should Be BelowCONTRA
1. Describe the ProblemIn the Piping module, the designer specifies a minimum centerline bend radius in the line stock. However, many hose suppliers specify the minimum inside bend radius of their hose stock. There is no way to directly input inside bend radius as a requirement in the line stock.2. Are you using a workaround?The designer can add the hose's cross-section radius to the centerline radius that is specified in the line stock.3. What is the use case for your organization?The ideal solution would enable the designer to select, in the line stock menu, whether they want to specify inside bend radius or centerline bend radius.4. What impact does this problem currently have on your organization?Our organization uses the piping module for flexible hoses for several components on every engine project. Therefore, all projects in the organization are impacted. The primary impact now is that most designers specify the supplier's inside bend radius as the CL bend radius and therefore h
1. Describe the ProblemWhen working with wire harness routing, we use assemblies for our connectors. These assemblies contain all of the relevant data for the connector (terminals, cavity plugs, etc.).Reference image.If I need to move a connector assembly, there's no option to specifically select an assembly. I first must select a component of the assembly and then navigate to the model tree where I can then select the complete assembly. 2. Are you using a workaround?The only workaround is to use multiple mouse clicks to first select the part, then navigate to the model tree and select the assembly.3. What is the use case for your organization?My idea would place "Assembly" as an option in the dropdown menu. Selecting assembly would then automatically select the entire connector assembly, rather than just a component of the connector assembly.4. What impact does this problem currently have on your organization?This has minimal impact, but would be a really nice addition to make my d
1. Describe the ProblemAnnotation orientation cannot be selected prior to placing GD&T Advisor annotations. If the user desires to have the annotation displayed on a different plane/different orientation than the default, they must manually edit the annotation and move to the desired plane.2. Are you using a workaround?Yes- manually redefining the annotation to preferred orientation after creating it in GD&T advisor.3. What is the use case for your organization?After selecting the feature you want to annotate in GD&T advisor, there would be an additional tab in the ribbon that would allow you to select the orientation plane for your new orientation.4. What impact does this problem currently have on your organization?Slows down designers by making them perform additional operations while creating parts.Status changed to: ArchivedHello,We are archiving your idea as part of a general review. This action is based on the age of your idea and the total number of votes received, a
We have a lot of customers that are using Creo Elements Direct Modeling and are working on projects with an architectural background. A lot of customers need to place their machines in a building and this building is delivered in IFC file format. Some of these architects also need to receive an IFC file back. Please make this an enhancement for the following version(s) because this is really needed by a lot of our customers.
1. Describe the ProblemAnnotation orientation cannot be selected prior to placing GD&T Advisor annotations. They require post-processing of setting orientations if GD&T Advisor defaults to an orientation that doesn't work for our All combined state.2. Are you using a workaround?Yes- manually redefining the annotation to preferred orientation after creating it in GD&T Advisor.3. What is the use case for your organization?After selecting the feature you want to annotate in GD&T advisor, there would be an additional tab in the ribbon that would allow you to select the orientation plane for your new annotation.4. What impact does this problem currently have on your organization?Slows down designers by making them perform additional operations while creating parts.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illlustrate 11.12. What is the problem?Decals and textures cannot be animated3. Are you using a workaround? If yes, please describe it.None4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We make machines with hydro-pneumatic pipes. It would be really interesting the possibility to animate decals and/or textures in order to represent the flow of the fluid inside the pipes5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)not applicable
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 9.1.0 and CreoView 10-1-02. What is the problem?End-users wants to start with CreoView Lite and when needed toggle to MCAD without the need to restart CreoView. Consider a company with around 11500 end usersConsider 2 packages in this company: one for CreoView LITE and one for CreoView MCAD 2/3 of users applied for CreoView MCAD1/3 of users applied for CreoView LITESometimes, MCAD users just need to visualize small parts, in which case LITE would suffice.Sometimes, LITE users need to change the color of a component, in which case they need MCAD.Given the large number of CreoView users, CreoView MCAD is dedicated to some activities. (licenses) Scenario 1: CreoView LITE user.- user needs to visualize a small 3D model to verify something.- when geometry is loaded, he needs to highlight some items and create an annotation that is kept in Wind
1. Describe the Problem Please provide a dark mode option for Creo View which is settable by the users themselves. 2. Are you using a workaround?No known workaround, as https://www.youtube.com/watch?v=CpX8gOFLevY only works for Creo Parametric3. What is the use case for your organization?Increase of user acceptance4. What impact does this problem currently have on your organization?Lack of user acceptance after switch from 3D Access to Creo View due to Windchill Introduction
1. Describe the ProblemMy family tables utilize many dimensional changes as well as measurements for multiple instances. This can get quite cluttered and difficult scroll horizontally for a long time to find certain columns. Organizational groups or other organizational tools would be very helpful. It would also be helpful if their was a way to locate the FT dimension within the part features.2. Are you using a workaround?No3. What is the use case for your organization?This would help us locate dimensions easier within the family table.4. What impact does this problem currently have on your organization?More time and difficulty when using family table instances
1. What product and version are you running?We use Creo View Lite 12.1.2. What is the problem?If I open a .dxf-file with Creo View, Creo View does not read the drawing scale of the file.We often have files with a drawing scale unequal 1:1 (e.g. 1:2). If I now measure in the file, the measurements are wrong.3. Are you using a workaround? If yes, please describe it.We manually change the Drawing Scale in the markup tab of Creo View.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We use CAD representation from Windchill in production. There the workers use the measuring function of Creo View.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)Around 500 people use Creo View to measure in CAD representations from Windchill. If they forget to change the Drawing Scale in Creo View, we are at risk to manufacture incorrect part
1. Describe the Problem Hi, In Creo, it is not possible to easily copy the name of a component (part or assembly) directly from the Model Tree.Copying a component name is possible only through workarounds. For example, one method: opening the component, selecting Save As, and then copying the name from the File name field. This approach is cumbersome and inefficient. In many workflows, component names need to be copied, for example to paste into documentation, search dialogs, or to re-insert the same component into the assembly using the Assemble command. Adding the ability to copy a component name (only text) directly to the Mini Toolbar in the Model Tree would significantly improve productivity and usability. I believe that this enhancement will increase the usability and efficiency of Creo users.It is a quick win that likely requires only a few hours of development time but has a big impact on usability and efficiency. Thnaks. 2. Are you usi
1. Describe the ProblemCED License Server 20.8 not supportable if you cannot access the web interface from the client computerHello all.The new CED License Server 20.8 is not supportable if you cannot access the web interface from the client computer.For example, if a user reports that he does not receive a license, it was previously possible to access the web interface via a web browser with:http://SERVER-Name:17171to access the MELs and check whether licenses are still available or whether the license server service is running at all.This is no longer possible with CED License Server 20.8 and is therefore no longer supportable.Then at least the possibility MUST be created that you can check from every client computer whether the license server is accessible and whether licenses are still available, as in FlexNET with the ptcstatus.bat.So the CED License Server 20.8 is not really applicable and usable.Best regards,Christiane2. Are you using a workaround?No there is no workaround.3. Wh
In all modeling versions, options for standard-compliant representation according to ISO 2553 are missing
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?creo schematics 102. What is the problem?when cleaning up a large schematic sometimes wires sit on top of one another. it takes time for a trained eye to see those "T junctions". I am asking for an enhancement/function that can either find and put circles on those overlaps so we can fix them or highlight the the combined segment that is overlapping. this image is using circles to highlight those junctions.or possibly highlight the overlap segment (or both) 3. Are you using a workaround? If yes, please describe it.yes, we have to spend 20-30 min on a large harness making sure we dont have those overlapping segments4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.it helps another person trace the schematic when it has been printed or exports5.
1. Describe the Problem The Select Related Tree could use several improvements: External references are not currently displayed. It would be very helpful to be able to select a feature/model and also display the external parents / children, Note: external children might only be possible for the currently open assembly or models in session. When working in assemblies, you first need to activate a part before being able to see Direct Parents / Children which is misleading / confusing for users. It's hard to trust the results if you have to remember to activate first. Or at very least the Creo UI should tell the user "Activate the model for more detailed results". When selecting components in the model tree, it would be very helpful if there could be a summary of external references for the selected component. 2. Are you using a workaround?The current Select Related Tree is not very useful without displaying external references since it only provides a p
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.