Recently active
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 11.02. What is the problem?For every import we have to set "Figure Display Style" Opaque in Appearance properties: 3. Are you using a workaround? If yes, please describe it.No workaround available.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I would like an option like many others to manage this option as default.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)5 users that create new Illustrations everyday.I created case C17506625 where the response was:About your request reported above, it is not possible to render by default "Figure Display Style" for Appearance in any part Properties window. A change of this feature needs a change in the source code of Illustrate
1. Describe the ProblemSandia National Laboratories supports programs and activities throughout DOE, DOD and other government complexes as well as supporting work from other contractual partners. As such many programs require that we follow their standards as it relates to EPM Names. In general, as companies become more global the need exist to support customers standards within our Digital thread in particular Creo Names. Need a Creo option for Navigation panel whereby user can set the primary model tree’s display from “Filename” to “Name”. This provides a path for our Digital Thread within Windchill to use the OOTB Windchill Filename, while allowing the specific project to use the customer “Name” to the contractual required standards. It’s important for Creo’s model tree to display the “Name” as the primary view in the model tree without taking up additional window spaces required to show the current default of “Filename” along with the selected addition of “Nam
1. What product and version are you running?Creo Illustrate 11.0Windchill 12.0.2.142. What is the issue?A routed system is associated with a part.This system has several representations, each one representing a different path in the assembly.Only one of the representations is associated with the part as the responsible one, usually the flat representation that shows the total length of the routed system.The representation brought into Creo Illustrate is always the one associated with the part as the owner.How can I choose which representation is displayed in Creo Illustrate? Would it be possible to select another one without changing the association between the CAD and the PART?3. Are you using a workaround? If so, please describe it.One alternative would be to change the association by selecting the ideal routing as the owner, but we face some challenges with this approach:By the time the illustration is created, the part is already in a state where changing the association is not all
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?As a PTC partner all our Windchill customers are running different Creo View versions. In this case we run Creo View 3.0 to 10.02. What is the problem?A lot of our customers are experiencing troubles when making measurements in Creo View as it's not an easy to use tool to make quick measurements. Certainly when the customers is having large assemblies.When making a measurement into an assembly, the user should select first the part, then the reference, then the other part with CTRL and the reference. Then you have a measurement from one plane to another for example. This takes already several clicks which is not easy to explain.The struggle is real when the measurement needs to be in a certain direction or with a certain path. (Angled direction for example).I motivate a lot of my customers to use Creo View as the tool in the assembly, purchase, ... but we mention not m
1. What product and version are you running?Creo Parametric 9.0.8.0Creo View Adapters 10.1Creo View 9.0 2. What is the issue?To illustrate decals on machine's CAD model, we follow these steps:1. We create a part (.PRT).2. We create a Fill.3. We create an Appearance for the decal as a Decal --> Image (PNG).4. We apply the Appearance to the Fill.5. We apply 100% transparency so that the edges of the Fill do not appear on the decal.6. We check- in the part.7. CAD Worker servers receive a request to generate a representation that can later be viewed in Creo View.8. We realize that when 100% transparency is applied, the representation is not generated.9. If we do not apply transparency, the decal is generated correctly, but the edges of the Fill are visible. 3. Are you using a workaround? If so, please describe it.We explored the three scenarios below:Design the decal using transparency:This is the current process; however, it does not generate a representation for viewing in C
1. Describe the ProblemWhen creating an offset plane, where you have selected an surface/plane to create the offset datum plane from as the first reference and then select and edge as the second reference, it jumps to the angled (offset) plane, and then you have to change it to parallel to get a parallel offset plane that is through the edge. If the edge selected was a point it works fine and the plane stays parallel.. What would be nice:If reference 1 is the edge and reference 2 is a plane/face it creates an angled plane.If reference 1 is a plane/face and reference 2 is an edge it creates a parallel plane through the edge.2. Are you using a workaround?manually change the plane option from offset to parallel3. What is the use case for your organization?when creating a parallel plane through an edge reference4. What impact does this problem currently have on your organization?more clicks to make a plane
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 11.0 2. What is the problem? Reference: Ticket - C17466304 Articles - CS426733 & CS426734 Creo View Measurement is similar to Creo Parametric, but it deviates enough that it is hard to work with and lacks some of the essential features. Some examples: The inability to measure the 'maximum' difference between two selected surfaces. As an example, if your distance measurements includes rounded surfaces, you want to measure the max distance between them, not from their imaginary center. In Creo Parametric, you can use: In Creo Parametric, you have the ability to select surfaces within the assembly easily. In Creo View, it becomes a juggling act to first select the part and then the necessary surface. More times than not, we end up with the wrong reference, too many references, and it doesn't end up measuring properly. It
1. Describe the Problem We are using ProGtolAttachGet() and ProGtolAttachOnAnnotationGet() to retrieve information about stacked geometric tolerances. We are having trouble acquiring information for three stacked geometric tolerances (gtols). An example image is attached for reference. When three gtols are stacked, both the 2nd (Parallelism) and the 3rd (Flatness) gtols are attached to the 1st one, making it difficult to determine which is 2nd one. Could you attach the 3rd gtol to the 2nd one, and the 2nd gtol to the 1st one? Additionally, we noticed that the position of the 3rd gtol is incorrect. 2. Are you using a workaround?No.3. What is the use case for your organization?To convert information into other type of files.4. What impact does this problem currently have on your organization?2nd and 3rd gtols are displayed at same position over rapped in converted files.
1. Describe the ProblemThe goal is to be able to have a parameter in each annotations (dimensions, notes, symbols, references, Gtol, etc) to retrieve the name of the combined state where she is displayed. 2. Are you using a workaround?There is no workaround with mapkeys or Pro/Program to do that3. What is the use case for your organization?We are deploying MBD in several departments of our brands, and by this way all the 3D models will contain PMI4. What impact does this problem currently have on your organization?We are not able to retrieve this information on 2D drawing for exemple, or more especially in 3D PDF. We need this information for internal control departments or for suppliers
1. Describe the Problemwould like to be able to export strings from EXCEL analysis. Currently, numerical values can be exported.2. Are you using a workaround?no3. What is the use case for your organization?Strings are sometimes used in relation and parameter creation.4. What impact does this problem currently have on your organization?He writes notes and then looks at them and types them in.
1. Describe the ProblemWant a function to clean up data files (.prt, .asm, etc.). If I use the same file for a long time and repeat modeling operations (create, modify, redefine, delete), old information is accumulated, so I want a function to erase them.2. Are you using a workaround?no3. What is the use case for your organization?Sometimes a previous PART file is copied to make changes and modifications.4. What impact does this problem currently have on your organization?Old information affects the creation of new relations and parameters.
1. Describe the Problem While there is a very limited API subset for rule based layer manipulation, there is a missing API related to determination of 'associative' attribute for rule based layer 2. Are you using a workaround?there are no known workarounds.3. What is the use case for your organization?retrofitting existing models with the new layers - need to query if an existing layer is ruled based and associative4. What impact does this problem currently have on your organization?removing of layer items from the existing layers is not possible for associative layers. removing the layer itself - opens a pandora box...
1. Describe the ProblemWith other topology tools, our engineers are able to specify a minimum and maximum thickness. These are often driven by the manufacturing method we are planning to use and supplier feedback. 2. Are you using a workaround?The "Material Spreading" constraint is a workaround if staying inside of Creo. It's just requires so much guessing and checking, leading to lots of unnecessary runs. Specifying values would be more straightforward for us. Not having min. and max. thickness constraints is one of many missing features which leads our engineers to use other topology tools outside of Creo from the start of their design process.3. What is the use case for your organization?We design lots and lots of castings, which generally have a min. and max. thickness to be successfully manufactured.4. What impact does this problem currently have on your organization?Inefficiency in Generative and engineers choosing to use other topology tools outside of Creo.
1. Describe the ProblemUsers have to solve for either structure or modal analyses separately in Creo Generative. We would like the ability to solve for these methods simultaneously as the part is experiencing these stresses together. Having the model accounting for both pieces yields valuable information that you cannot get from viewing these results separately as you can weigh the two against each other where one load might not be as significant as the other.2. Are you using a workaround?Running models in separate modes and trying to weigh these out separately.3. What is the use case for your organization?The use case is almost any part where we have a modal requirement and a stress requirement. Having the ability to solve both of these directly leads to learnings you cannot get from looking at them separately.4. What impact does this problem currently have on your organization?The impact is that this leads users to try other topology tools outside of Creo that do have this capability
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Automotive Industry. My role is Design Optimization Specialist. Stakeholders are all Creo Parametric users within our Company.2. What version of Creo Parametric are you currently running?Creo Parametric 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When you create a swept blend and select a section, there isn’t a good way to quickly see where the points are that you can drag the arrow to. I have attached two images for reference. The first image shows the section is selected but there isn't an easy way to see where all 10 points are located. The second image shows an example of the user interface displaying where the points are located. 4. What is the use case for your organization?Several of the parts created by our organization utilize the swept blend tool. 5. What business
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry, Mechanical team lead. My group / colleagues2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We run generative design on our local machines. It would be nice to be able to add multiple design studies in a queue both structure and modal types, with different design criteria. For example through a drop down option for "Optimize now" or "Queue optimization" Then, when ready, click a button to start processing them. One should then also be able to choose to either process them sequentially or in parallel. This way one could set up multiple studies with varying parameters and set it to process over night.4. What is the use case for your organization?Shorter time to reach final solution.5. What business value would you
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo view 10.0.0.0 Build 26 EN2. What is the problem?Could you please add the functionality to “toggle” commands on and off. For example, to draw a picture using the Freehand command, I need to click on the freehand button every single time I draw a new line. This is very frustrating. Or perhaps just a shortcut key to redo the last command? I will greatly appreciate any help with this.3. Are you using a workaround? If yes, please describe it.No workaround that I know of.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.When we review drawings we have to make basic line drawings. This slows down that process significantly. Incorporating a toggle on repeat last command will save time and wont be frustrating. Currently I don't like using creo view because of this, this will make a HUG
ModelCheck is able to check which tolerancing standard is selected on PRT and ASM (see https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/model_analysis/modelcheck/start_config_options/tolerance_type.html#). This start configuration of ModelCheck is also needed for DRW since these properties should not differ. Also there should be a check for the version that is selected (toolkit-value will be available for 7.0.8 https://www.ptc.com/en/support/article/CS359079). Field of usage: Using the right syntax ruels for GD&T: https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/whats_new_pma/detail-setting_syntax_tolerance_check_version_2.html
It would be very useful to have the KeyShot rendering engine available also in Creo Illustrate and not only in Creo Parametric. It is a big lack for a software that creates images and videos for services. For example, the following video is impossible to obtain with Creo Illustrate: https://www.youtube.com/watch?v=XQQNz_RppB0
1. Describe the Problem Reference: Ticket - 17466086 Article - CS425857 PCB design is critical for our business. We would like a drawing table which can show a BOM of components of the PCB assembly. For example one row of the BOM table would show that item 150 is Resistor XYZ with a quantity of 5 and a description of ABC. However, we want one more column which will combine all of the reference designators from the model into one cell (from Parameter ECAD_REF_DES). For instance, it would say R1, R2, R7, R9, R13. The completed row would look like this: 150 XYZ ABC 5 R1, R2, R7, R9, R13 2. Are you using a workaround?We need to export data from Creo, using a mapkey, and then have a batch file try to manipulate the data. This is really not ideal.3. What is the use case for your organization?Generating a BOM within Creo that includes Reference Designators. This can then be used to easily cross-check to our ERP and ECAD
1. Describe the ProblemWhen features are hidden from the model tree they become dim in color. Some people might not easily the hidden items. I suggest that when you hide an item on the model tree you should be given an option to change the color of how they are displayed after they are hidden.2. Are you using a workaround?No there is no workaround as the color cannot be changed.3. What is the use case for your organization?People who struggle to see well might struggle to see hidden items.4. What impact does this problem currently have on your organization?It can reduce productivity.
1. Describe the Problem I have hand tremors so it is difficult to use the scroll button on the mouse for clicking and rotating the model. Creo View has options for mouse navigation under File -> Options -> General -> Navigation -> Navigation model. I have found ProductView selection meets my needs. Now in Creo I cannot find such options. I have searched Creo, the online help, and asked some Creo experts. Now I am here asking if there is such an option or if it can be added for a future update. 2. Are you using a workaround?No3. What is the use case for your organization?Can configure for peoples need4. What impact does this problem currently have on your organization?For me it is difficult to use Creo
1. Describe the Problem-When we split the harness using Split Harness Command, it does not separate Clips or additional components of connectors to other cable generated by split harness command. -Ideally, If we are splitting the harness then it should include everything on the other hand of location selected.-We have to manually add all the non cabling components to the harness. 2. Are you using a workaround?Manually add required non cabling components to the harness.3. What is the use case for your organization?Split harness will help to manage the complex harnesses.4. What impact does this problem currently have on your organization?Split Harness does not serve the purpose and it only splits the harness, not all components attached to that harness.
1. Describe the Problem If there is a hidden layer in the drw environment, request a change to exclude the hidden layer when exporting. (If the hidden layer has the same export layer name as the unhidden layer, export will not be executed) 2. Are you using a workaround?Temporarily change export layer name3. What is the use case for your organization?Temporarily change export layer name4. What impact does this problem currently have on your organization?Manual work is often required due to errors occurring during drawing changes.
1. Describe the ProblemIn contrast to scientific investigations in a theoretical environment, the development engineer is certain of a reasonably accurate representation of the environment. It is not enough to have fixed values for the boundaries; reality usually works with time-dependent influences (frictional heat, pressure peaks, heat shocks, temperature fluctuations day/night, etc.).This option is available in Creo Simulate, and the logical step would be to make it available in Live Simulate as well.Unfortunately, the value marked in red cannot be controlled by parameters or any other time-dependent value. An improvement to Live Simulate so that the input values can be controlled like in Creo Simulate would really be an enhancement. You can take the idea further and attach it to the analysis tool to allow automatic optimizations to run (especially considering the significantly faster GPU computing time). This improvement would easily double the value of Live Simulation.2. Are you u
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.