Recently active
1. Describe the Problem When a secondary Creo object is opened from PDMLink Workspace thru the embedded browser it is not automatically activated. Currently the user has to activate this window manually by Ctrl-A or the equivalent Window command. The new Model Window should be activated automatically the same as when using File > Open. 2. Are you using a workaround?Manually selecting Ctrl-A after the fact.3. What is the use case for your organization?Happens all day every day all users.4. What impact does this problem currently have on your organization?Newer users struggle for the first few months of learning Creo. Experienced users have to explain to the newer users that this inconsistent behavior is just how PTC Creo products work sometimes.
Hi Guy. I need the Document to instruct Using of STRUCTURE and FEATURE Tag in Creo elements/direct Modeling 20.7Thanks
1. Describe the Problemat the moment user must create two separate extend features and set lenght parameters connected/same via relation, whilest it should be possible to pick both edges in the same feature2. Are you using a workaround?manualy by doing two separate extend features3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemin current functionality user can only set two states:1 - set as last read only2 - set all as read only I dream to have ability to set single feature as READ ONLY like in this example: 2. Are you using a workaround?no way at the moment3. What is the use case for your organization?very often but not possible to use at the moment4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
Hello CREO community!We often face the challenge of modeling complex gear pairs and splined shafts in CREO Parametric. We always strive to follow international standards to ensure the design is as accurate as possible for manufacturing. However, detailing the tooth profiles according to the standards in every project is very time-consuming.My question is: Is there any plugin or specialized software that integrates with CREO and generates these gear profiles in a more automated way?Here is an example of a plugin that integrates with SolidWorks, NX, Solid Edge, and Inventor. https://www.eassistant.eu/enBest regards,Uilian de Souza
Is there a Creo Parametric setting that will make the Measure Distance tool launch with Setup and Results both expanded? Every time it launches it has them both collapsed. I want the tool to launch by default with them both expanded. Yes, this is only a couple of mouse clicks, but this has to be repeated many times per day, and the expand/collapse buttons are really small. So, this is a non-trivial headache.
1. Describe the ProblemAdd information system about geometry issues as TRAFIC LIGHT SYSTEM 😉 I think about 3 different ststuses: 1 - GREEN LIGHT: when there are no geometry errors2 - ORANGE LIGHT: when some of appeared errors are marked as IGNORED3 - RED LIGHT: when still some geometry errors exist not solved examples for above states: 2. Are you using a workaround?no acual functionality3. What is the use case for your organization?not aplicable4. What impact does this problem currently have on your organization?not aplicableStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
How to insert Item to a Tree, and form a tree structure by setting the parent/children relationship of treeItems?What does ItemPositionData mean?Can some one show me some code.
We are running v20.6.1 and are unable to get any FEA jobs to run successfully using the Design Advisor module. We opened a support ticket late last year and were directed to the SPR linked below. Design Advisor hangs during Performing Analysis and does not finish the job with special computer environment in Creo Elements/Direct Modeling To date there does not appear to be a resolution to this issue. The enhancements documents for later releases, including v20.7, do not indicate that this is resolved. Has anyone else encountered this issue? Do you have any workarounds to offer? Thank you for your help
I have a table that we use to capture Rev History. Whenever we add a row to this table, the text size and text alignment does not carry the alignment from the previous row. Is there a way to set it the text size and alignment (or even style) for each column so that newly added rows don't need to be specifically defined? The first row under the headers shows how I want ever added row to behave. The second row shows what I am currently getting in regards to Vertical Alignment, Horizontal Alignment, and Text Size. Currently using Creo 10.0
How to compose the tree data structure in Creo UI component Tree. I am using OTK Java.With these classes it provide, I don't know how to add childNode or set parentNode. I can only display one node in the tree which might be the root node. This is my code. package com.ptc.otkjavaexamples.ui;/*--------------------------------------------------------------------------*\ | | Module Details: | | Name: TechniqueTree.java | | Purpose: Display the TechniqueTree dialog \*--------------------------------------------------------------------------*/ import com.ptc.cipjava.jxthrowable; import com.ptc.pfc.pfcCommand.DefaultUICommandActionListener; import com.ptc.uifc.uifcComponent.*; import com.ptc.uifc.uifcCore.ItemPositionData; import com.ptc.uifc.uifcCore.uifcCore; import com.ptc.uifc.uifcDialog.*; import com.ptc.uifc.uifcInputPanel.*; import com.ptc.uifc.uifcPushButton.*; import com.ptc.uifc.uifcTree.*; public class TechniqueTree extends DefaultUICommandActionListener { private String
No question but a tip. I want to have the dimensions of a bush in the parameter SubtitleIf a dimension is rounds to zero, then I don't want that zero in the Parameter subtitle.Example:di = 0.8L = 2.5D = 4 RTOS defaults to rounding to 1 decimal (RTOS is available from Creo 11 and higher)If I would do it that way then it would be SUBTITLE = \ "d" + RTOS(Di)+\ " L" + RTOS(L)+\ " D" + RTOS(D)Which would result in Subtitle == d0.8 L2.5 D4.0 If I would type RTOS(D,0) then it would be "D4"With that knowledge I made an equation for how much decimals I need.Ceil(D - Floor (D))In this case if D = 4,2 it would be 4,2-4 which is 0,2 and it is then rounded up to 1If D = 4,0 then it would be 4,0 - 4 which is 0 and it is then rounded op to 0So then you getSUBTITLE = \ "d" + RTOS(Di,Ceil(Di - Floor (Di))) +\ " L" + RTOS(L,Ceil(L - Floor (L)))+\ " D" + RTOS(D,Ceil(D - Floor (D)))Which would result in Subtitle == d0.8 L2.5 D4But we are not there yet, because in edge cases where you h
I have done a Google search as well as reviewing PTC's documentation online but haven't discovered exactly how to do that which likely isn't that difficult.I want to have my "Start In" location to be easily accessible and my config.pro burrowed in deeper but in a location that would not change after new Creo installs. Below shows where I would like the respective directory locations to be:Start In: C:/CurrentWorkConfig.pro: C:/CurrentWork/Creo/Settings There is one PTC help file that seems to suggest how this might be done, but I don't know where the suggested line would get applied.Alternate Path—You can set the environment variable PTC_CREO_ALT_SETTINGS_PATH to point to an alternative path where you store your configuration files. This path could be set to any mapped network drive or a shared OneDrive folder.The following files are read automatically from the directory that PTC_CREO_ALT_SETTINGS_PATH points to:◦config.pro◦config.sup◦creo_parametric_admin
1. Describe the ProblemCreo does not allow you to create a bolt circle center marks within the drawing. A bolt circle pattern or feature has to be created using the hole feature, set as diametric, within the part file. If this feature is created using a diametric hole type in the part, then this will allow you to Annotate the bolt circle center marks properly in the drawing.The issue is that most do not create a bolt circle pattern using the diameter type within the hole feature. Most are created using a sketch and then extruding material. Creo does not recognize the center point of and extrude, so center marks do not annotate.2. Are you using a workaround?Yes. A datum point has to be added to the sketch to get a center mark. The center mark only allows for a linear dimensions, not a diametric. To get a diametric center mark, you need to create a cosmetic sketch or create a sketch on the drawing. This is time consuming and unnecessary.3. What is the use case for your organization?Add a
I am looking for a way to search in a drawing for a table with the first cell has the content "Rev." and if this table is found, a new table should be added.Below script finds the table, but it seems my command table.InsertRow() seems to be failing.Can somebody help me?(The table has 4 columns, if this has any influence.) function addRowToRevTables(drawing) { try { // Get all tables in the drawing var tables = drawing.ListTables(); for (var i = 0; i < tables.Count; i++) { var table = tables.Item(i); try { // Get text from cell(1,1) var cell = pfcCreate("pfcTableCell").Create(1, 1); var mode = pfcCreate("pfcParamMode").DWGTABLE_NORM
I was trying my first Simulation in Creo Ansys Simulation, facing an issue during creation of mesh. I checked with multiple YouTube video but still I could get the solution."Material Some bodies or simulation objects in your modeldo not have a valid material type/elasticity model assigned."Please help me to resolve. I am using Creo 10.0.7.0
Bounding Box as a Feature Please make a feature in Creo Parametric representing the smallest area or volume in which a design can fit, bounding box. Please spend a few minutes looking at this video from SolidWorks, it is very simple and easy to understand. Bunding Box Chees Erik Sallingboe
Guten Tag, Ich versuche gerade mithilfe des Generativen Designs ein Bauteil zu optimieren.Leider erzeugt Creo keine neue Geometrie. Es wird nur ein Bauteil erzeugt, das ausschließlich die beibehaltene Geometrie beinhaltet, zwischen diesen beiden Körpern wird keine Verbindung erstellt. Die Optimierung zeigt auch nur eine Zeit von 00:01.
Hi, I am working on IFX custom library creation for my company.I have more than 1300 screws with 4-5 categories .I can not use dat files with category name and multiple parts from same category in the file. As i just dont have differentiation on Top category, i have different variations in sizes, lengths, then material, finish, drive types. I am now creating individual .dat file with info value placed in them showing part number, its size, length, material, finish, drive types.So, my top level category shows around 200 screws in one category dropdown,then each row shows, its name and other attributes. Is their any way we can add multiple options of dropdowns to select from, like length, or thread what we have. SO extra dropdowns for material, drive type.
I'm working in Creo Parametric version 11.0.1.0. When in sketch mode and selecting entities for adding dimensions, I hover over the entity until it highlights, but when I click the entity often does not get selected. I thought there might be a config parameter that affects the sensitivity of sketch entity selection, but I wasn't able to identify one.
1. Describe the ProblemWhen creating solids and surfaces with an extrusion, the default depth setting is "Variable". When cutting solids or surfaces with an extrusion, we have the possibility to select "Through all" to avoid having to change dimensions if the solid or surface we want to cut is enlarged. This guarantees resiliance to design changes. But when creating solids or surfaces, the same resiliance does not exist. We might want to create another body to use as a tool to cut an existing body. Or create an extruded surface to cut a solid. Since we only are allowed to specify a distance or specify a datum plane as reference, it forces us to create those datum planes even for common use cases. a) The idea is to provide another extrude option when adding material to replace the non-working option of "Through all" that only workds for cuts. This option could be called "Beyond" and it would allow the extrusion to be made up-to the extents of a selectable reference, which could be a bod
1. Describe the ProblemWhen cutting solids and surfaces with an extrusion, the default depth setting is "Variable". I find that the vast majority of times when I do those, I intend to cut Through All. By orders of magnitude. So I find myself toggling from "Variable" to "Through All" again and again, and it is annoying. Also: for some reason when I cut surfaces, the default direction is AWAY from the surface, which is rather odd. How often is that the intent? I cannot recall a single time where I have sketched on a surface only to cut another surface with it. In those situations, I usually sketch on the surface I want to cut, or on some datum plane. Please change both defaults.2. Are you using a workaround?Yes, I peck around with my mouse pointer the required extra times.3. What is the use case for your organization?No relevant answer to this question.4. What impact does this problem currently have on your organization?Takes time and causes frustration.Status changed to: Archived 2026-0
1. Describe the ProblemBecause REMOVE feature can require long time for preview generation or very often even crash the Creo, it will be great to PRESET at least two things:- save the model before start REMOVE investigation- activate LEAVE OPEN as defaultin PRESET user should decide if turn on this functions or not2. Are you using a workaround?I created a mapkey to first save the model and go immediatelly to active "Leave open" option3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemcurrently user can select "connected" refferences and will be great th have ability to select them if they are disconnected 2. Are you using a workaround?each disconnected reference must be used separatedly3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the Problemat the moment current functionality require copy first some "Mirror items" to be not a partof whole quilt or solid model, but the geometry exist and it schold be as somple as just pick some existing elements, and the mirror plane 2. Are you using a workaround?at the moment any mirror items must be prepared before the mirror feature3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?noneStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.