Recently active
Please include detailed documentation such as screenshots, images or video.1. What version of the software are you running?Creo 10.0.0.02. What is the problem?Lack of functionality3. Are you using a workaround? If yes, please describe it.None decent4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would use this function to generate a fully associative multibody part from an assembly file with the aim to generate the final machined part (1 item in our BOM) derived from a welded assembly.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)It will help saving a lot of time spent by users in generating a shrinkwrap and obtain a better result.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO CREATE THE ASSEMBLY FROM MULTIBODY PARTYour reply is very valuable for me
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders. All industries that create, edit and use sheetmetal parts in Creo Parametric. 2. What version of Creo Parametric are you currently running?Creo Parametric 7.0.8.0 up to 9.0.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video. In Sheetmetal parts if dependent copy is selected in a new mirror feature, both partially and fully dependent options stay greyed out and are not clickable. Meanwhile in Modeling parts if dependent copy is selected in a new mirror feature, you can select either partially dependent or fully dependent. Note: this bug has existed since 2014 and has never been fixed: CS166281 - Mirror feature option "Fully dependent with options to vary" is grayed out in Sheetmetal mode in Creo Parametric Once a mirror feature is created i
Add a slot in the sketcher or hole wizard. Slots take way to long to make.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 9.0.5.02. What is the problem?I cannot select multiple adjoining surfaces from a quilt to offset. I am required to select the surfaces, make a copy then offset from that.3. Are you using a workaround? If yes, please describe it.Copying the surfaces, then offsetting them.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.I only need to offset a few parts of a quilt and am not able to do so. When designing plastic injection molded parts, we use offsets very often to provide a uniform wall thickness as the thicken command is not adequate for most parts of the complexity which we work with. So we have to use the work-around which adds another feature and another point of model failure and adds more clutter to the feature-tree.5. What impact does this problem currently have on your
to allow box selection at all scenarios and for everything (including right to leftand left to right).
1. Describe the Problem Reference Ticket: C17501015 SPR: 15787581 We have had issues in the past when a step model from another tool has color information assigned to both sides of a surface. After Creo imports the model, managing colors is very difficult as Creo assumes color functionality is to the outside surface only. We then either can't remove the old colors from the model colors or it removes other colors we already assigned. One idea to solve this issue is: To give users more control over color assignment during import by introducing an import profile option that allows users to choose how colors are applied. By default, colors will be assigned as specified in the STEP file. However, users will have the flexibility to select an alternative behavior, applying colors to the outside only for solids. This addition aims to support diverse workflows while keeping the default behavior unchanged for consistency. 2. Are you using a workaround?We end up redo
1. Describe the ProblemFlow Analysis のドキュメントやチュートリアルで、ファンやプロペラなど、回転系の物が回転して液体や気体の流れを解析するものを作成して下さい。2. Are you using a workaround?サポートセンターなどから類似の動画を送って頂きましたが、説明がないので非常に分かりにくいです。3. What is the use case for your organization?ある容器の中に液体が入っており、そこにプロペラ(ファン)が回転して液体の速度が同じになうようなプロペラ(ファン)の位置や形状を解析するなど4. What impact does this problem currently have on your organization?回転系の解析が出来ずに試作品を作成するコストや時間が発生している。
1. Describe the ProblemNo way to make a chamfer based off a sketched curve like you can a round.2. Are you using a workaround?Using swept blends3. What is the use case for your organization?I need a chamfer that has lead ins and outs4. What impact does this problem currently have on your organization?Added time and features to create the same geometry.
1. Describe the ProblemGood morning,It would be nice if the dialog box inside a command could be enlarged according to needs.For example, the "Shell" command requires many selections and the current space in which the face selections appear is really limiting and uncomfortable.You could give the possibility to resize it at will and not fixed as it is now.2. Are you using a workaround?No.3. What is the use case for your organization?Usability.4. What impact does this problem currently have on your organization?uncomfortable
1. Describe the ProblemWhen assemble a component, if the value of "comp_assemble_start" is set to "strain_in_window" , a separate window appears immediately, but when an existing component is reassembled by edit definition , a separate window does not appear. I want a separate window appears immediately when I reassemble already assembled component with edit definition.2. Are you using a workaround?We have to manually turn on the separate window every time I reassemble.3. What is the use case for your organization?I want a separate window appears immediately when I reassemble already assembled component with edit definition, if the value of "comp_assemble_start" is set to "strain_in_window". There is no need to manually turn on a separate window, making assembling easier4. What impact does this problem currently have on your organization?We have to manually turn on the separate window every time I reassemble.
1. Describe the ProblemFrom an opened Assembly, we would like a new option that would Export an individual STL file for Each Part in an Assembly using the Assembly Coordinate System. For example, if the assembly is a plate and 4 bolts, the output would be 5 STL files. If each of these 5 STL files was imported into a part and then these 5 new parts assembled using the default coordinate systems, you would have the original assembly (but tessellated of course). The application for this enhancement is a downstream use outside of Creo. The name of this option might be something like Export every part per location in Assembly.2. Are you using a workaround?Within the Assembly, activate each location of a Part, create a new coordinate system in the part at the location of the Assembly coordinate system, open each Part, export STL selecting the new coordinate system(s). For example, if the assembly is a plate and 4 bolts, the bolt would have 4 new coordinate systems tha
1. Describe the Problem Right now the default round size generates a size based on the boundary box of the part. That's fine. The number it produces is not typically a manufacturing friendly size though. For metric sizes I would recommend that the default number be rounded to 1mm increments. For English units I would recommend that the default number be rounded to common fractional sizes. 2. Are you using a workaround?Yes, I update the default round size number every time I make a round.3. What is the use case for your organization?Would save training; save manufacturing costs so that a machine shop wasn't trying to mill in a .205 radius round.4. What impact does this problem currently have on your organization?This is more problematic for new people who don't have a manufacturing background to know to use standard sizes.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Maritime Industry. My role is digital capabilities and my stake holders are engineers' that will be working with Creo View in their day to day. 2. What product and version are you currently running?Creo View 8.0.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.I want to filter Model parts by attributes. For instance in the screen shots, I have two different values under the attribute "MATERIAL_MATERIAL" and I would like to see only the parts with the Value "AH36". Is there a way this can be done via filters? 4. What is the use case for your organization?This would help our engineers' filter to necessary parts, create part groups and navigate models in their day to day.5. What business value would your suggestion represent for your organization?This has great business value for
1. Describe the ProblemIt would be useful if in the 'planar section' command it were possible to select multiple references sufficient to identify a plane, such as 3 points, 2 coplanar axes, 1 axis and a plane with a parallelism/orthogonality constraint. This way, there would be no need to create a plane on the fly, which is then placed outside. Alternatively: making sure that the 3D dragger remains attached to that axis or point even after modifications.2. Are you using a workaround?1. Create a plane ad use it for cross section. 2. Use offset cross section3. What is the use case for your organization?When we want to create a section through an axis off a hole.4. What impact does this problem currently have on your organization?Greater chance of errors in the sections on the drawings, which should cut a hole in half but have not been updated following some changes.
Creo Parametric comes with a library of ISO weld symbols, based on the ISO 2553 from 1983, as detailed in the following help page :https://support.ptc.com/help/creo/creo_pma/r9.0/usascii/index.html#page/detail/User_Defined_Parametric_Weld_Symbols.html This standard has been updated in 2019 with new symbols that my company need to use.According to this article, this update is not planned : https://www.ptc.com/en/support/article/cs303110 We need the default Creo weld symbols library to be updated to the 2019 ISO 2553 standard.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 10.02. What is the problem?Impossible to rotate a 2d symbolImpossible to add a leader line to a 2d symbol3. Are you using a workaround? If yes, please describe it.no4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.In our technical documents we must specify, using symbols, the type of lubricant to be applied to the parts. The areas indicated by the symbol are sometimes complex in the same viewing orientation and in this case we must sometimes rotate the symbol to make the indication understandable. sometimes we would also like to add a leader line to point out several faces concerned5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)The document quality is poor and users are frustrated th
1. Describe the ProblemHow can I load a Creo Elements Direct Modeling file into Creo Parametric or integrate it into an assembly if the file has been moved from the zero point in Creo Elements Direct Modeling?The zoom function “Fit new” is used to zoom to the entire model including the auxiliary KEs such as plane and axis. This is why it is not possible to find the model in 3D space in this way; it would make more sense to limit this zoom area to the actual surface or solid model. How does PTC imagine how to work with such CED models in Creo Parametric, because there are an unlimited number of these CED models with moved zero points? For us in the company, this is already a UNITE showstopper before we can really get started. INFO: The video was filmed in Creo Parametric 7.x, but also detected in Crep Parametric 10.x. 2. Are you using a workaround?No workaround at the moment3. What is the use case for your organization?Usecase see in the attached video. Creo Parametr
1. Describe the ProblemCreo can specify jogs on Dimension line, but ProToolkit API is missing to retrieve those points. Please add API, so we can get those points.2. Are you using a workaround?No. I have contacted PTC support and they confirm API is missing to retrieve them.3. What is the use case for your organization?We develop app as third party, and we cannot identify dimension line direction.4. What impact does this problem currently have on your organization?It is considered as our application's bug.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo Illustrate 112. What is the problem?When creating, for example, 3 illustrations in Creo Illustrate 11 for a single parts list, it is necessary to create 3 separate .c3di files and recreate the exploded view from scratch in each file.3. Are you using a workaround? If yes, please describe it.NO4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.We would like to have the ability to create the exploded view once and then generate, for example, 3 views based on it, all linked to a single parts list.5. What impact does this problem currently have on your organization? (Number of users affected, hours of lost productivity, etc.)All service users, blocks customer .
In the model threads are currently shown as cosmetics. Currently in shaded view the difference between a Thread hole and Through hole can't be seen. Enhance so that the actual thread is shown in the shaded view, for instance by projecting a picture/decal of the correct thread type into the bore of the hole (Inventor does this and also all video game engines add detail to their models by doing so). The picture/decal keeps the models light (so that no helical sweep feature is needed for this), but makes it clear in shaded view and pictures of the shaded view that a thread hole is inside the model or a thread is at the outer diameter of a shaft.
Hello everyone,If you like below thing that should be available in Creo Part modelling multibody THERE SHOULD BE A WAY TO CREATE MULTIPLE SHEETMETAL BODY IN SAME PARTYour reply is very valuable for me
1. Describe the Problem We are slowly going through our current libraries and adding them to the Intelligent Fastener Extension (IFX). We can not add our SEM screws, as they have been built as an assembly and IFX can not manage assembly hardware. 2. Are you using a workaround?No. We are not using IFX for this type of hardware.3. What is the use case for your organization?We use SEM screws in most of our products. Having some hardware in IFX and others not, does not make for a robust library and process.4. What impact does this problem currently have on your organization?It creates confusion with process, implementation and part searching.
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo View 11.1 2. What is the problem?Reference Article: CS444532 When ecad context data is published from Creo using convECADConductors = 1, it has some issues in Creo View: 1 - The quality of the generated graphics is extremely subpar. 2 - You can't turn on/off the visualization of the data 3 - The file size is drastically increased over a file without the context data. We had a full PCB, with components at about 800kb. The ECAD context data, which just added some poorly generated quilts, brought it to 2mb!3. Are you using a workaround? If yes, please describe it. No. We are not going to generate the data as it is today.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.Our company makes many products, all with PCBs. Our processes and workflows are built
1. Describe the ProblemNo way to add embedded datum references when assembling components together. There is the datum reference button present but the references get added to the model tree and they are not automatically hidden. 2. Are you using a workaround?Yes, just adding the references needed prior to assembling component.3. What is the use case for your organization?We create sheet metal assemblies with solid component fixtured at angles. The current process is to add a datum plane or axis, then constraining through points. all of which require opening up multiple components and adding duplicated references to allow this to work in the assembly.4. What impact does this problem currently have on your organization?Risk due to added references, and wasted time due to working in independent parts.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.