Recently active
Lawrence,Does the Fastener Definition window change if you select "Account for Stiffness"?
Everytime you select "New", you have a list of types to chose from. This is where you start to create an assembly.After you have created the assembly, you can add parts to that assembly, and the parts will be at the "part level".
Noah,What do you mean by "test" simulations?Can you upload a screenshot of the warning "do not have the proper license"?There could be several reasons why this is happening:1. You don't have a license to run Creo Simulate.2. You have a valid license, but it wasn't configured during installation.3. You have a valid license, but the server may need to be stopped, reread the license file, and resart the server.First, find out if you have a license to run Creo Simulate by looking at your license file (open it with a text editor) and see if Creo Simulate is listed.
Can you upload an image of what you're trying to accomplish?
Alexandra,Is this the first occurance since installing Creo Simulate?
Basim,It looks like you're trying to use the Extrude function (extruding a 3D solid), according to your model tree, but the tutorial does not. The tutorial uses the Sketch feature and Revolves that sketch around an axis. Go back and watch the video again:Sketch feature, draws an arc and connects the arc with a vertical line.Sketch in a center line for the revolve feature.Select OK.Select the Revolve function.
Hi Guido,I'm currently working on this, switching mine from English to German (you want German to English). I think this is done within the parametric.psf file and you have to have the language install at setup. I will let you know how it works on my end, as I am upgrading to Creo 2.0 M080.
Jack,First of all, what Date Code are you using?Second, what you're stating is that when you select "Mirror Features With Geometry", another message appears and states, "Cannot Mirror Some Features Of This Part". Correct?If your part is not confidential, can you upload it? I will try it on my end.
Everytime I perform a contact analysis, I always place the contacts in myself, and give each contact pair a unique name. I don't depend on the auto setups, etc., because sometimes you will not even see the contact pairs.
If I understand your question correctly, yes, you can display the run status (run summary) for a batch run. Just highlight the design study name for the batch file while it's running, select the run status icon, and you will see the run summary in action, just like any other design study. That's what I do whenever I'm running a batch, especially for interference fit problems where you use engine command line options. If this doesn't resolve your question, maybe you can upload some screenshots of what you're trying to achieve, and I'll take a closer look at it.
Hoping everyone had a great holiday break in the states and beyond. Over the past week we've had some incredible contributions from the educators within the Schools Program community, so be sure to check out their PTC Creo creations in the Schools Program photo galleries to see their models and maybe offer some advice to help them along.Without further ado, here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:By Steven DunkerCreo Simulate 2.0 - Rotating Frame of Reference?By Steven DunkerDebugging with Visual Studio 2010By James SullivanFind() gives solution outside the constraintsBy Alan HuangIgnore folders from current project/repositoryBy Chandra VedBy Lakshminarayanan Ravichandran Video Link : 4484By Scott MorrisImplicit SurfaceBy Marta JanerasA plethora of Mathcad worksheets By Fred LuskFeel free to click on any of the links above to discuss, like, rate or reply to any of this weeks' posts. Congratulati
Doug,In GCRI link, there are some notes at the bottom of the page, and one of the notes states:"GCRI support is limited to the previous two releases, except in Wildfire 3.0 which is limited to the previous release."I'm using creo 2.0. Does this mean that I can't open files previous to WF5? Counting backwards from creo 2: creo 1, then WF5, that's the previous two releases. If this is what the note means, then I couldn't open .prt files created in creo 2 in WF4. What are your thoughts on this?Thanks for posting the GCRI info.
Ravi,If you are already on a maintenance contract with PTC, you shouldn't have to pay for the upgraded license. Everytime a new release comes out (wf3, wf4, wf5, creo 1, creo 2, etc.) you need an updated license. A creo parametric 2.0 license will run all previous versions. But to answer your question, no, you cannot use the wf5 license to run creo.
Tim,Thanks for sharing the .pdf file.
Follow the below instructions and see if this works for you. Your Kes.jpg shows a simple assembly with two components.
You cannot open a creo 2.0 file in WF4, because the files are not backwards compatible, only forward compatible.
Bryant,The image that I provided is a corner, but are you saying a different type of corner?
Does anyone know how to make a circular corner relief using the sheetmetal functions? PTC support stated that you cannot make this type of relief in sheetmetal that has and extruded rectangular cut-out as shown below. The help center states to rip then make the relief. The corner, circled in red, will not allow a rip or relief. Any suggestions on how to make this work?
Try opening one component from the assembly, change the color, close the component and view it in the assembly. Did the new color remain?
Antonius,Have you aquired Solidworks since this post? If so, are you finding it more robust than Creo?
This week we were thrilled to announce the winners of our 3rd Annual Jack-O-Lantern design contest, congratulations to our winners and a special shout out to especially the FIRST students from FTC Robotics Team #5666 for their contributions (we've got a special prize pack lined up for you guys!). If you missed any of the submissions head on over to the Jack-O-Lantern photo gallery to view all the great PTC Creo pumpkin creations.As always, here is this week's Member Showcase Roundup, demonstrating our members' expert use with designs, 3D models, worksheets and how-to's:By Steven DunkerPlotting a crystal in MathcadBy Goran Krstic Video Link : 4462By Chris MeraniDraw an axis through a point, normal to a surfaceBy Jeroen BruyndonckxPolynomial with multiple solutionsBy Max MuehleBy Jim Mark Video Link : 4457By Scott MorrisWindchill PDMLink 10.1 M040 Installation InstructionsBy Paul WyndhamMoving the vaults to a new driveBy Pardeep SinghFeel free to click on any of the links above to discus
I've been using Creo 2.0 M070 since its release, and I haven't had one single issue, not even one crash. I use the HPZ800 workstation with Windows 7 Enterprise, Version 6.1.7601 Service Pack 1, Build 7601, 64-bit OS.I have a compatiable NVIDA Quadro 600 graphics card (PTC tested and recommended) with adaquate memory.I have 6 GB of physical memory.Many crashes have occured due to incompatiable graphics cards and hardware and poorly derived config.pro files.
Check to see if your datum planes have been turned on in the below example under your Creo Parametric Options:
Bryant,I have installed Creo Parametic 2.0 M070 since its release, and so far, I haven't had any issues with crashing. If your PC is not configured, including hardware, to accomodate Creo, then I'm sure you will have application crashes. Here's the system that I'm running Creo on in OpenGL:Check to see what kind of graphics card you're using and compare it to Creo's recommend list/operating system.
Bryant,If you called tech support for install issues, then yes, you will get someone in India who lives in India. I've installed PTC for over 10 years, and whenever I have to call for an install problem, I always get someone in India, and sometimes it's difficult to understand their language. It's been a chronic problem with PTC technical support, so I just call back until I get an Indian that has good communication skills. I shouldn't have to do that, but that's the way it is.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.