Recently active
Hi Parth,If your file is not a student version, please feel free to upload it, and I can take a look at it. To upload a file, go to the "Use advanced editor" link in the upper right hand corner when you reply. Welcome to the forum.
Material properties for S235:http://www.matweb.com/search/DataSheet.aspx?MatGUID=045930e40a0f43ec8b0935acd039761d&ckck=1
It sounds like you're concerned about the stresses on the floor and not in the fasteners. Right?
This is a great video, but I don't think this is hypoid gearing. With hypoid gearing, the center axis of the driving gear is offset from the center axis of the mating gear, as shown below.
David,Is this a real component? I'm asking because it's so massive (70" tall, 79.76" OD, 67.5" ID, and 19841 lb). This is supposed to go in a basement? But to answer your question, in order to use the advanced fastener tool, you need two components. In this case, the floor and the cast iron part. The first thing that needs to be address is what is the floor made of? If it's concrete, concrete is very poor in tension, but excellent in compression.
I found CATIA V5 very easy to use. It reminded me of WF5, with all those tool bars and pull-down menus.
I just came out of a 9-day CATIA V5 class, and I must say that the CATIA sketcher mode is not as advanced as Creo, and it takes more clicks of the mouse to constrain elements than Creo, but the instructor stated Dassault is working on it. We won't talk about CATIA V4, because that's about as old-fashioned as you can get and an absolute nightmare. V5 does has some nice predefined tools in sketcher mode, but does lack the concentric circle/arc function.
Community,I've created a cross-section view on three components with hatch marks for aluminum and ANSI34 (plastic/rubber). All the hatch marks are created in BLUE, by default. When trying to change the hatch marks to BLACK, only half of the hatch marks for aluminum turn black, and one out of four per hatch set turn black for ANSI34, as shown in the below image. What is the solution to make all the hatch marks black? Thank you.
I'll have to open your model and take a look. My previous post was for general knowledge.
Bernie,How would you compare Creo's AFX (Advanced Frame Extension) to SW? Please see the below link.http://www.ptc.com/cad/3d-design/structural-framework-and-weld-design
Matthew,I found that the easiest way to change all the hatch marks at once is to change the system color as shown below. The path is:File>Options>System Colors>Graphics>LetterSelecting black will change all the hatch marks to black. The reason I wanted to do it this way is to put images in a technical publication, because everything in the pub is black.
Nice rendering in SW. I was wondering if anyone in this post is willing to shed some insight for the attached link. It's one of those discussions where someone thinks SW is far superior than Creo. I would love to give some input on this, but I've never used SW, where I know you all have, and even teach it. https://community.ptc.com/t5/System-Administration/Why-is-Creo3-so-old-fashioned/td-p/200950#465636
Now we have an answer:Creo 3.0 = old-fashionedSolidworks 2016 = new-fashioned
Yes, CATIA V5 was introduced in 1998, however, the V5 version that was taught to us was V5-6R2013, not the 1998 version. Our instructor stated that there wasn't a lot of difference between V5 and V6, but I agree, we should have been taught in V6. But management makes the decisions around here. V5 files are supposed to be forward compatible with V6, because they use the same kernel.
This is why you turn "Fix Separation" to Off and insert contacts.
The files we receive from Boeing and Sikorsky are in V5 and some still in V4.
Never encountered that message.
You may have a symmetrical model, but how is the model loaded for simulation?
You're right. A lot of clicks.
Yes that works, as shown below. I didn't see the text at the bottom of your previous post. In Creo 2, you don't have to select the Unplace button to activate "Place note flat to scree in model space". Thanks for sharing.
Product Development removed the capability in Creo Parametric 3.0 to create a new note flat to the screen and maintain the leader, verified by PTC tech support case 12167129. Figure 1 is from Creo 2.0, and Figure 2 shows what has been removed. This is recommend to be restored back in Creo 3.0, as this is a very nice feature to have for illustrated part breakdowns. In Creo 2.0, the model can be rotated while the note stays flat to the screen and the leader remains attached to the part.Figure 1Figure 2
This is not fixed even in M110. You cannot make a note flat to the screen with a leader. Check out the below images. Adding the config option does not activate the check box in the note window.
Thanks Angela. I just got my M110 disk today, and what you're showing is the way it is in Creo 2, and that's why I still use Creo 2. So I will load Creo 3 M110 today and check it out.
Stephen,Selecting "Yes" to unalign all external references for Extrude 2 and Extrude 3 resolved the problem. When I first opened the model last Friday, I didn't see any missing references, as you posted. The warning was "outdated components/references". Anyway, that was the fix and thanks for looking at the model.
Perhaps you could sketch a point, pattern it on a curve, then pattern the pattern around the sphere. You would have to leave a space for the point on top of the sphere, but I think this would work. Do you have an image of what you would like to do?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.