Recently active
This tip will explain how to adjust the part transparency continuously in Creo Elements/Direct Modeling 18.0 and below.The Part Properties dialog in Creo Elements/Direct Modeling allows you to adjust the transparency level in 3 steps:Opaque - 0% transparencySemi - 50% transparencyFull - 100% transparencyYou can choose other procentual values for the transparency as follows:The command 'SET_PART_BASE_TRANSPARENCY' allows to adjust the transparency from 0.0 (0%) to 1.0 (100%) in a nearly step-less way.As an example, the following command adjusts the transparency level of the current part to 75%. Just enter the following line into the command line: (SET_PART_BASE_TRANSPARENCY :part (oli:sd-inq-curr-part) :transp 0.75)The Part Properties dialog only displays a value rounded to one of the three fixed transparency levels.To inquire the exact transparency level, you can use the command 'sd-inq-part-transparency'.Here is an example for the command line to inquire
Most common problems faced by designers are not during the design stage, but it's usually after the reviews. When a designer sends a design for validation to manufacturing, he/she starts receiving feedback on changes based on manufacturing setup. It is very difficult for a design engineer to track changes happening at manufacturing end and keep updating it with updated features. For example, to know which new injection molding machine has been installed, it's capacity and capability to produce material with thickness and avoiding problems like sink marks, undercuts etc.This creates many iterations in design process and designer has to spend lot of time on correcting such problems. Further for a multinational organization the design and manufacturing are not co-located. Hence to have reviews on regular basis is not only difficult but also addressing such design problems is almost impossible. The design standard would change by region location, manufacturing setup, material used and many
"Engineering is Everywhere" -- You have heard this sentence from me before on this blog …From the moment you wake up (likely via an alarm clock) to the moment you lie down at the end of your day (it takes some really elaborate woodworking machinery to build furniture) – pretty much all the things you use and see have an aspect of engineering to them.Most of you who read this, are actually engineers or work with engineers, so you are even more into it than anybody else - you think and talk about engineering topics at work. What I find fascinating, though, is to think about the engineering behind less common items, or the engineering in foreign countries, or the engineering throughout history – you get the idea.Do you have a great personal engineering story to tell? Maybe your childhood friend who moved out of town when you were 10 is suddenly attending the same engineering class? Or you’ve met your wife/husband through work and have worked and lived together for a long time? What made y
We are getting close to finish this design..
Analyzing clearance between various components is a key to create successful assembly. The requirement varies based on types of parts and assembly used. The analysis of clearance between individual component or set of assembly may vary depending on type of component, material and application.Designers working with assemblies have to repeatedly check clearances between sets of components, which can be extremely difficult and time consuming. Users not only need global clearances but also require clearance checks between specific component pairs. A lot of time is spent in performing such clearance checks and again in reviews to reduce possibilities of human errors.It is important to maintain minimum clearance between components or parts during assembly to meet high temperature, high voltage and other such operating conditionsThe following picture depicts how these checks can be carried out under Creo Elements/Pro (Pro/E) environment. You can work with global as well as component level spe
This post is for Greg Frankland –Greg, thanks for your suggestion. You actually picked an easy topic as there is a ton to say about engineering in the food sector. We have even sponsored an episode of the Product Design Show on engineering.com recently where we featured a couple of Creo Elements/Direct customers and how they used the product to design their food processing equipment…When I read your suggestion, however, what immediately came into my mind was fruit picking! Maybe because I own a garden myself and now, in summer, am going through a busy time picking fruits and vegetables, cleaning, and cooking marmalade.I did a quick search to see if “banana picking machine” would bring up anything. Thinking about all the creepy animals that usually live in the regions where bananas grow, I thought having a machine to do the actual picking on the plantation would be desirable...Instead I found that some automation exists for various fruits. Fruit picking overall still seems to be a very
I have just sent out reminders to our users via Twitter and Facebook to alert them of the entry deadline for the Create the Future Design Contest 2011 by NASA Tech Briefs (disclosure: this contest is sponsored by Creo).This got me thinking once more about innovation and invention.I am assuming that for most of you, if not all, it is an overall objective to improve existing products and constantly make them better, but also create new models or entirely new products.Do you sometimes see items on the market that make you think “what a piece of crap” and wonder why somebody seriously invested money into manufacturing those? As engineers, you may even take more notice of such things than an average consumer like me, and you may look at these things more from a design perspective. Whereas I – with the pragmatic eye of a woman – would rather categorize as “useful” or “useless” – with a few categories in between such as “qualifies as a joke present”.I am sure many of us dream of having one gr
At PTC, it is an important part of our philosophy to give back to the community and employees are actively encouraged to engage in charitable activities in their regions. I don’t think this makes us anything special, in fact, many large organizations do engage and also contribute financial aid to charitable organizations. Not to mention the positive effect for PR.Still, I would like to point at one activity I, myself, have engaged in just recently. It is a great example of the team spirit here at PTC and it makes me really proud to be part of the team.My kudos go to my colleague Ute from the Ratingen office (Germany), who has organized this event for the 10th time this year and has dedicated a lot of time beyond her regular job tasks to make this a success.So for the tenth time, Ute and many other colleagues from Germany, have organized this Beach Volleyball tournament where teams from various customer sites, PTC resellers, and PTC staff played against each other – ate and drank and pa
Too heavy and high FOS structure. (Max Strees due tinny areas where should have weldment)
One of two parts to form a Bed for a 30000 liters fiberglass tank.
What impact does concept design have in product development - tell us your opinion and win an iPad?PTC are conducting a survey as part of a study to learn more about the role and impact of concept design in product development.The survey seeks to understand current attitudes, trends, and tools used in the earliest stages of discrete product manufacturing. From this survey and other research, a final report of the key findings will be published.Anyone involved in the development and manufacturing process in any role can contribute. Individual surveys are confidential and identifying information about you will not be published. The survey will take 20–30 minutes to complete and will close on Sunday, July 31, 2011.Each participant is entitled to receive a pre-release copy of the final report findings from the study. In addition, five survey respondents will be selected at random to each receive an Apple iPad 2. The draw will take place on August 1, 2011 and the five lucky respondents will
More and more CAD users (and users in general) have dual monitor setups at their desktop. I for one am a big fan. It is great to be able to leverage this 2x in screen real estate to display multiple windows in full screen mode. For our Windchill integration with Creo we too wanted to take full advantage of this popular configuration. The ideal would be to display my Creo modeling application on one screen and my data management window (the embedded browser) in another. Creo 1.0 introduces a new config.pro option making this possible. By setting the new option:web_browser_in_separate_window=yes.For those new to the Creo 1.0 menus this is accessed via File > Options then click on Configuration Editor in the left hand pane of the Options UIOnce the value is set and saved, you will need to restart Creo for the setting to take effect. Now you are able to take full advantage of your screen real estate for modeling while at the same time maxi
To mix things up a bit, I would like to introduce you to my new colleague, Megan Virtanen. She will commandeer my blog today with a special guest interview. As one of PTC’s newest marketing members in our North American team, Megan has the opportunity to work closely with PTC’s Regional User Groups, or RUGs. In an effort to become better acquainted with a RUG, she’s decided to go straight to PTC user and RUG expert Mike Dolan to find out what exactly is a RUG, what it means to be part of a RUG and what makes a RUG successful.Some background first...PTC/USER is the independent voice for users of PTC software. PTC/USER is the sole entity recognized by PTC as the official worldwide representative of its customers. There are approximately 70 regional user groups worldwide associated with PTC/USER, which are also referred to as RUGs or regional user groups.One such regional group is NOPUG, Northern Ohio PTC User Group, headed up by Michael Dolan. Mike has 37 years un
We just got our new Creo/Pro, but still don´t have much time to work with it.But I manage to get some time to do this rendering to a presentation cover.It´s two hydrocyclones (purchased) that we have to test it and drawn some performance curves for a client.Can´t wait to get more time with Creo.OBS: Those models were built without any measurements of the real equipament, was made just for a cover image.
Take a look at this - it is absolutely amazing what school kids are working on throughout the UK. This blows the ease of use debate out of the water and up to the moon!Scalextric4Schools is a schools challenge aiming to inspire students to consider Science and Engineering related subjects for Higher Education and as a career. Children aged between 11 and 18, have been designing, manufacturing, testing and refining their slot cars. The UK finals, held recently, provided the perfect opportunity for teams to pit their cars against each other for the top spot on the podium. Cars were tested to the limit and raced against the clock around a fully landscaped circuit provided by Hornby. Teams also presented to a panel of judges describing how they designed, manufactured, developed and tuned their cars for maximum performance. If it doesn´t WOW you please let me know and I will eat my .....http://bit.ly/Scalextrix4schoolsAnd as alwaysThink and act positive - only then can you achieve successA
The beauty of words This rhyme was just added to the Mathcad page on Facebook today and I like it a lota) because it is a rhyme and thus shows the creativity of our usersb) because it really highlights one of the core benefits of using Mathcad – its ease of use and advantage over spreadsheets.We had just recently started this Mathcad page on Facebook and I really enjoy seeing it grow and seeing the users interact with us in a rather informal way.The inspiration for this rhyming game came through someone else’s message on Twitter “… Mathcad Prime is worth your time”. This makes a marketer’s heart jump for joy, for sure!As it’s Friday today, let’s have some rhyming fun here on PlanetPTC Community, too!Can you come up with Mathcad rhyme? Show us how creative you are outside of math and engineering calculations. For help, check out what already exists on Facebook and post your rhyme here on my PlanetPTC Community blog. From all submissions, we will rando
Watch this video if you want to know how to make Custom Edge Treatment Video Link : 2041
Hi there,You have certainly heard of our new tutorial platform, the LearningExchange, created by the PTC University team.I bet you have - after all, we are very proud of it and have been shouting out the news across all channels recently.I don’t want to repeat any of this here, but give you my personal opinion why I think this tool rocks. This is not going to be a long post – just a quick list…I touched on this in an earlier post when stating that through Internet and social media, we have access to a wealth of content. However, especially when you are new to a subject, how do you know if a tutorial or piece of information you find is really correct and pointing you in the right direction? A tutorial may show you how to do something in a software program, but the solution may be too complicated or just not be a best practice. A beginner, for example, wouldn’t be able to tell.This is where I see the big advantage of the LearningExchange – as this is information from the experts at PTC –
Trying to get caught up after attending PlanetPTC 2011. Lots of work to do, but I thought I would share my thoughts on my experience at this years conference. Generally, the conference was the same as last year with descent content and presentations. I feel that there is a lot more Windchill content then anything else. But that may reflect PTC's push to sell Windchill over the past few years. In addition, it may also reflect that more VARs and large customers are attending then smaller companies. (my assumption not based on any real data) The sessions I attended that were based on Creo and Manufacturing had fairly rich content. Most of these were Partner presentations that were limited to 20 minutes. I did Tweet during the conference (mostly the first two days) and I noticed others were tweeting as well. Hope this was benificial for those who couldn't attend this yea
Having to convert some old projects to Creo.We will get a lot Direct Modeling later, cause all files are dumb now .
We are in the day-2, so far the conference has gone prety well. The theme of Creo, Windchill 10.0 and Service Information ties are converging into providing a well tied solution solution with fully functional associtivity.
I can't believe I just found out about this thing. Really looking forward to using the Video Share to post and retreive content from others using WC.
Attending my first PTC conference. The keynote speakers have been exceptional and the break-out informational sessiions regarding Windchill have been very informative. It is nice to get a good understanding of PTC's vision and roadmap for the future.
It has been a while since I have placed a blog post. but some of the things I have seen here in Vegas have really impressed me. I have seen Creo and was able to get my hands on it in one of the PTC/university training sessions. I really think that I am going to like Creo. I think that I am really going to like the following features:Lifted constraints on the ribbon in Drawing modeAuto Add/Remove functionalityFlexible modelingcustomization available to the ribbonsIf you haven't got a chance to check it out yet be sure to take a peek as I feel that there is really going to be some good things come out of the Creo package.-GAF
Just attended the tips and tricks seminar. Always find great new solutions to find ways to work faster
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.