Recently active
1. Describe the ProblemCurrently it is not possible to add additional components to already patterned groups in assemblies. This limitation leads to additional effort or not proper model trees which in the end impacts the performance in Creo.2. Are you using a workaround?Either deleting the existing pattern and re-do it --> which especially when you already assigned References for MBD is a no go Or create an additional pattern --> which clutters the modeltree with features for something which could have been added to the inital pattern.3. What is the use case for your organization?During assembly of prototypes additional parts may be found to be added to existing groups4. What impact does this problem currently have on your organization?Efficiency loss, performance drop, cluttered model treesStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this
1. Describe the Problemduring creating a curve as a copy from existing geometry user can change ends and way for measurement similar as in point on curve definition: 2. Are you using a workaround?create point before the curve copy and pick this point3. What is the use case for your organization?it speed up the creation processes4. What impact does this problem currently have on your organization?lowStatus changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action is based on the age of your idea and the total number of votes received, as per this announcement.You can always post a new idea with all the details required in the form.Thank you for your participation.
1. Describe the ProblemNot able to retrieve the information of the annotation plane & it's normal vector of a dimension which is from a feature (e.g, dimension from an extrude, revolve, etc).2. Are you using a workaround?No workaround3. What is the use case for your organization?I have part with set of features & a drawing with few 2D views of the part. I need to show the model annotation in the drawing. For example, I need to show the dimensions of a hole feature. I would like to show the dimensions with best shown 2D view. If a hole is normal to FRONT view - I need to show the diameter & location from top side surfaces in FRONT view of drawing. And hole depth dimension in TOP view. In order to do this, I need to retrieve the normal vector of the feature dimension, so that I can do some math to find the best 2D view to show the dimension. If there's any alternate workaround, then please let me know how to approach this,4. What impact does this problem currently have on you
1. Describe the Problem I dream about new functionality (similar as in UDF with reference part), when user will be able to choose a reference part during creation a new version of previous part. I mean in my mind, that user will be able to pick a reference part which will be on fly open in other window and fly in parallel after a new restored part history where user will be changing a lot and in old reference part if history will be not equal due to in new part some features can be deleted or added, so in this new functionality from time to time user will be able to adjust both histories, by set point of alignment (can be more than one). 2. Are you using a workaround?Currently I open a reference part in separate window or even on second Creo in general on second screen.3. What is the use case for your organization?only on designers during R&D normal life4. What impact does this problem currently have on your organization?only more time consumingStatus changed to: Archived 2026-07-
1. Describe the ProblemRequirement: We're currently facing a critical limitation in our sheet metal design workflow: Creo lacks native functionality to create square-to-round transitions, which are essential for hopper designs. While we've developed a workaround, it's both time-consuming and compromises accuracy. This gap is especially frustrating given our deep investment in Model Based Definition (MBD). We've spent significant time and effort building a robust MBD workflow that allows us to represent both formed and flat states within a single sheet metal model—streamlining communication between design and manufacturing.Unfortunately, because Creo doesn't support this transition geometry, we're forced to rely on Autodesk Inventor for its lofted flange feature. This dependency disrupts our goal of a unified, model-driven process and introduces inefficiencies and data fragmentation. It’s a roadblock in our journey toward full MBD adoption across the enterprise. For a company committed
1. Describe the ProblemCurrently, thickness analysis feature is, sadly, inferior to the solution provided in the tools from other vendors - and also to another tool of PTC portfolio. In most modern 3D design tools we have a full rolling ball analysis with color gradient flow indicating how thickness varies on the external surface of a part – making it easy to identify manufacturing defects: In Creo, you can only specify some limits and that’s it. The results, according to our engineers, are not good enough to assess the potential issues: As I made my research, to my surprise, I noticed that PTC owns a tool not only with a rolling ball, but also with ray method and others (gradients).This functionality (the best I’ve seen so far) is available in a tool that is in a lower tier than Creo; that is in Onshape (https://www.youtube.com/watch?v=ULI0yQIGZkU).The tweaking in functionality of the tool – easy win for PTC development team – would beto do do the following:Shoot the b
1. Describe the ProblemIt will be great to have an opportunity to return to value and direction in e.g. offset feature to previously parameters we have before enter edit definition. here is the examplewhen enter to feature offset redefinition we have this situation:but when I replace main surface to new one (here this blue):preview stop showing the solution, and I start play with offset value and direction next to see what is possible:and I realized that the direction should be flippedand here is the idea for improvement (not only for OFFSET FEATURE I think 😉 ) when user should be able to have opportunity to remind the value (new button) how it was previously and also additional checkbox to remind also the direction or not 2. Are you using a workaround?manually cancel edit definition and preview the old value and direction and then redefine once again3. What is the use case for your organization?very often4. What impact does this problem currently have on your organization?lowStatus
1. Describe the ProblemThe "square fill pattern" and the "diamond fill pattern" are identical. You can rotate the square pattern by 45 degrees to get the diamond pattern, and a diamond pattern rotated by 45 degrees is a square pattern. The diamond pattern should be similar to the hexagon pattern, but with the ability to set the spacing in the X and Y directions independently and/or to set the X spacing and the angle of the diamond. Creation of a diamond mesh using a workaround of 2 directional patterns: 2. Are you using a workaround?This can be achieved by using 2 "direction" patterns, since a direction pattern allows different spacing in the X and Y directions. A second direction pattern of a second feature is needed to get the "offset" members. See screenshot in the problem description.3. What is the use case for your organization?A practical application would be the diamond shaped mesh of an expanded metal mesh. See screenshot in problem description.4. What impact does this prob
1. Describe the ProblemIn Creo Parametric 11.0.4.0 and later, datum planes are displayed as rectangular shapes filled with a transparent color. However, when the fill is disabled, the edge color remains static and does not update dynamically when rotating the model. This makes it difficult to visually distinguish between the positive and negative sides of the datum plane.Previously, the edge color changed dynamically based on the viewing direction, which provided intuitive feedback. The fill color should behave the same way — dynamically matching the edge color to indicate the orientation of the datum plane.2. Are you using a workaround?I am keeping the old setting with enable_legacy_datum_planes yes and unintentionally do without the improvement in UX.3. What is the use case for your organization?Increase UX against SolidWorks4. What impact does this problem currently have on your organization?UX Impact not assededStatus changed to: Archived 2026-07-06We are archiving this idea as par
1. Describe the Problem(function() { var wrapper = document.getElementById('lia-vid-6379744204112w842h540r51'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)I recorded example video, but since Creo 10 and multiple bodies enhancement, also UDF should be able to handle this functionality2. Are you using a workaround?manually redefine necessary features, but it is hard sometimes3. What is the use case for your organization?low4. What impact does this problem currently have on your organization?low
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running?Creo 8.0.7.0 and 9.0.402. What is the problem?The box selection method to pick multiple parts on the screen is not available when in the "Edit Position" mode for Exploded Views in Creo Parametric. (In general, the selection functions can be inconsistent, this is the one that is bothering for my current tasking.)3. Are you using a workaround? If yes, please describe it.The user must exit the "Edit Position" mode, then they can use the box select methodology to select the desired components. Then re-enter the "Edit Position" mode, then they can finally position the components as desired.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a practical situation.The users will be able to more efficiently create exploded views using Creo Parametric. This applies to any time that ex
1. Describe the Problem For all copy geom, merge or inheritance features there should be a way to do an update for features set to "manual update" Perplexing, there is an "update inheritance" right click context menu option when inheritance models are set to "automatic". If its "automatic" you shouldn't need a context menu to update it. There is no such menu or button for updating it when it is set to a "manual update" though. 2. Are you using a workaround?Yes, I change the feature to "automatic update", click ok and then I have to go back in and redefine it again as a manual update. This is defined as the procedure in this support article: https://www.ptc.com/en/support/article/CS2630613. What is the use case for your organization?The naming of "manual update" implies that there is a way to update it manually. There is no such option and it is confusing to new users which means we have to train people for something that the GUI should have built in.4. What impact does this proble
Please include detailed documentation such as screenshots, images or video.1. What product and version are you running? All versions and MORs of Creo Parametric and Windchill Workgroup Manager that use Creo Platform Services with Chromium Embedded Framework (CEF).2. What is the problem? Per CS404101, regular patches to Creo Platform Services will be made available from PTC. IT departments use tools to automate deployment of countless patches for operating systems and dozens of applications. Any patches that do not participate in automated patch management and deployment tools adds to the workload for IT departments or application owners.3. Are you using a workaround? If yes, please describe it. Manually search for updates on PTC support site, then download the patches, then create deployment for SCCM, then test it, then deploy it.4. What is the use case for your organization? Describe how your idea would work in context or how it would apply to a
1. Describe the ProblemThe stability of sketches should be improved. I would like to use this sketch to create a series of tabs around my part. I want to use the pattern table capability to place the tabs at specific angles. However, I can't use pattern the feature because at specific angles the arch jumps acrost the part. Which causes the feature to fail.(function() { var wrapper = document.getElementById('lia-vid-6368763508112w962h540r518'); var videoEl = wrapper ? wrapper.querySelector('video-js') : null; if (videoEl) { if (window.videojs) { window.videojs(videoEl).ready(function() { this.on('loadedmetadata', function() { this.el().querySelectorAll('.vjs-load-progress div[data-start]').forEach(function(bar) { bar.setAttribute('role', 'presentation'); bar.setAttribute('aria-hidden', 'true'); }); }); }); } }})();(view in My Videos)2. Are you using a workaround?I will have a to make compromises to the sketch to get a consistent behavior.
1. Describe the Problem Fixing imported geometries (STEP...) to obtain one or more solids has always been a tedious, time-consuming, and repetitive operation. Artificial intelligence (AI) could be used to automatically or semi-automatically fix these geometries. 2. Are you using a workaround?No. I do it manually3. What is the use case for your organization?Fixing imported data coming from suppliers' website.4. What impact does this problem currently have on your organization?Great time saving
1. Describe the Problem When defining a simplified rep, the SHOW menu has the following options: Components with Explicit Statuses: HIDES components that do not have explicit statuses Active: SHOWS components that are Active Inactive: SHOWS components that are Inactive Envelopes: SHOWS envelopes The Hiding behavior of the Explicit Status setting is inconsistent with the name of the menu ("Show"), the tooltip on the setting ("Show components with explicit statuses"), and the other settings which show and do not hide, yet it is lumped in with them, even under a "Check All" option which everyone I've spoken with about it assumes will show everything due to it being in the Show menu. There needs to be a Show All option, which does not have this hiding option selected. The Explicit hiding option needs to be reworded to tell the user it will hide things. Perhaps change the name of the menu to Filter to be consistent with every other application. 2. Are you using a workaround?N/A3. What is
Please remove the 80 Character barrier/limit in STRING Parameters. If a String Parameter is allowed to be entered in PDMLink then it should be able to be as long as required. Also Word Wrapping in Tables allows for longer text to be effectively entered but now the limiting factor is the 80 characters that is a max in Parameters.
it would be great to have a way in Creo when exporting to 3D PDF that we could set the different combined state tabs to be on separate sheets. Also, if there was a way to set up the 3D PDF with a template that had our company information already setup similar to a drawing template. This would allow us to put common notes, tolerancing, and company info in without having to add it every time we created a file.
Enhance PTC Creo Performance Advisor to track Creo Extension licenses like DEX, ARX, SPARK ...... .This information will help organization to know how users are making use of investment. Also an opportunity to promote unused capabilities.
1. Describe the ProblemImprove Thumbnail Rendering for Thin Geometry and Surfaces in Creo View AdaptersIssue Description:In the CAD Details Page, we’ve observed that thick cables and certain surfaces visible in the Creo model are not appearing in the generated static thumbnails (JPEG files). This leads to an incomplete visual representation and affects usability for downstream users relying on these previews.Requested Enhancement:We request an enhancement to improve the rendering quality of static thumbnails generated by Creo View Adapters. Specifically:Ensure visibility of thin geometry such as cables.Improve surface rendering fidelity.Automate thumbnail generation to better reflect the actual model geometry.Impact:Improved thumbnail quality will enhance user experience, reduce misinterpretation, and support better decision-making during design reviews and documentation.Reference:PTC Case Discussion and Article CS67713.2. Are you using a workaround?Workaround: we are using the creo vi
There are multiple posts asking how to blend a square to circle, but instead of "rolling" the corners (Die Formed) some would like the Brake Formed method (rounds divided into equal bends/facets) and all involve a rather complex workaround that don't always have the best results. This is a request for enhancement as even a tool like Fusion360 has the option to switch between the two.You can see it here: https://youtu.be/g4LYh2__uqE?t=168If the link doesn't work, just search on Youtube "Fusion360 - Lofted Flange Closed Profile". In the video you can see that a simple square and a simple circle are drawn offset from each other and a lofted feature is used, the only "hiccup" in the video was adding a rip... That's it. Whereas in Creo:- Your square needs rounded corners (fillets) and said rounds need to be manually drawn in facets.- The circle needs to be faceted as well (you can't just draw a circle).- The facets of the "circle" need to be parallel to the line entities
Although you can add a Style to a Combined State in 3D mode, you cannot take advantage of it in a drawing view.The drawing Combined State should carry style too, so that we can create an assembly view with different display styles for its components.i.e.: To hightlight one component in an assembly with Shading, while the rest of the components remain No Hidden.
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.We're an OEM in the textile industry. Development of yarn winding, processing and handling machines.We work a lot with sheetmetal, often using inserts.2. What version of Creo Parametric are you currently running?Creo 9.0.2Windchill 12.1.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.A sheetmetal part cannot have representations or a family table.This makes it impossible to produce a flat instance or flat representation.This makes it impossible to add a flat state to a drawing.4. What is the use case for your organization?In our ERP system, we assign a partnumber to a bend part, with its inserts and paint.The reason we do this, is to minimise administration during the seperate steps and because inserts are often inserted in the flat state.We're currently switching from Modeling. In mod
To improve the top-down design methodology when designing variations based uppon a skeleton that's a family table, we'd like to suggest this improvement.Youtube unlisted video: This is the setup:A skeleton that contains a family table with the refs for a 3/4/5m machine, those refs are packed in a publish geometry.That Published geometry is taken in with an external copy geometry and used in different features.When saved to a new variant for 3Meter machine.And the skeleton is renamed as well.It's still looking at the original skeleton source for 4 meter.We can do an edit definition and point to the source of the instance of 3 Meter, which has the same feature numbers and ID's.But Creo doesn't treat the family table part as the same or connected, and all features fail:So if there could be an option to replace the source parameter to a family table member, retaining the feature number and ID's, that would save a lot of time rebuilding all the dependent features. Please
1. Describe the ProblemIt would be beneficial to have an option in Creo STEP exporter, to export only selected parameters to STEP. It could be implemented using the .dep_step file, or a new config file.Solution could look like below. In this example, we would have only two parameters listed in config in the STEP file.ParameterExportFilter = "INCLUDE"ParameterExport{"PARAM1""PARAM2"}2. Are you using a workaround?No, currently we have no workaround for that. Using "Designated only" is not a solution in this case.3. What is the use case for your organization?Sharing STEP files with suppliers/customers/other companies4. What impact does this problem currently have on your organization?Sharing all parameters might lead to sharing proprietary/sensitive information stored in parameters by accident. Additionally, exporting only a set of selected parameters improves readability of the file.Status changed to: Archived 2026-07-06We are archiving this idea as part of a general review. This action
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.