Recently active
Please give us a simple way to fix and change the reference of a baseline of ordinate dimensions that fail.I am running into this problem from time to time, and the process is really really time consuming. If there are easy dimensions, it just takes time, but if there are complicated conditions like tangency, this can be even more frustrating.So of course I went to see what was out there regarding this topic.As of TAN112745 we know that:Resolution ----------------- This issue will be resolved in a future release of Pro/ENGINEER.But it popped up again in Creo 3 with CS195198:ReleaseStatusDatecodeCreo 3.0No Plans to Fix-By seing CS69648 and CS206139 we learn that we should recreate the dimension completely.As of CS106382 we are informed that this is: Not part of the Pro/Engineer functionalityIn CS28790 we see a hint of a bit of light at the end of the tunnel:Resolution As per Creo Elements/Pro current product specifications, it is not possible to Edit the Attachments of an Ordinate Base
Currently flexible components can only be regenerated on specific positions but not during a mechanism animation. The desired functionality is to regenerate the shape of the flexible components at each frame of the animation sequence. This functionality exists in Solidworks & NX.
In the drawing of Creo Parametric 7.0.0.0 it is not possible to create automatic balloons based on a table with a repeat region associated to a multibody part. The buttons of the menu “Create Balloons”, in the Table tab, work only with a BOM table of an assembly. It is of paramount importance to enable the use of automatic balloons with multibody tables, like the ones already added to the Quick Tables button.
1. Describe the ProblemTo add a feature inside the sketcher, similar to AutoCAD "Match Properties" https://www.youtube.com/watch?v=kDnNqw2hHSA 2. Are you using a workaround?no3. What is the use case for your organization?If you use different line colors or line styles inside the same sketch, you could change styles faster than know4. What impact does this problem currently have on your organization?All users.
1. Describe the ProblemWhen copying several surfaces of a complex body there is the option to "untrim to envelope".This feature closes all inner open edges to a smooth predicted surface. But it has a big disadvantage!As a result you get several independent surface fragments. There is no option to output as a single quilt. copy all surfaces as is: copy and untrim to envelope: It would be really helpful to have the option to do so by a checkbox, like this: Possible solution: 2. Are you using a workaround?Currently you need to merge all the single surface elements to a single quilt. But how reasonable is this when you need to merge hundreds of single surface elements?3. What is the use case for your organization?easier surface designs for every user!4. What impact does this problem currently have on your organization?huge workaround by merging surfaces
1. Describe the ProblemFor browsing in the Creo browser, anything that opens a new window (i.e. Open in New Window on a link, or extension functions, etc.) it opens a window so small it's not useful for much. There needs to be some way to resize the default. Wincom Quick Access, for example, opens a pdf, but it opens in this small window, which is not useable.2. Are you using a workaround?Open, resize, zoom.3. What is the use case for your organization?It should behave like other browsers and create another full size browser window.4. What impact does this problem currently have on your organization?It would look like it was intelligently designed because it acts like every other browser does. When the Creo browser behaves in clunky and inefficient ways that other browsers handle fine, it does not help Creo's usability.
1. Describe the ProblemI am software engineer.I request to add API to get side significance which can be set for welding symbol.UI image is attached.2. Are you using a workaround?No.3. What is the use case for your organization?Convert to our file format or create welding in other CADs.4. What impact does this problem currently have on your organization?We cannot convert welding accurately. Customer have to recreate welding symbols in other CADs.
1. Describe the ProblemSandia National Laboratories supports programs and activities throughout DOE, DOD and other government complexes as well as supporting work from other contractual partners. As such many programs require that we follow their standards as it relates to EPM Names. In general, as companies become more global the need exist to support customers standards within our Digital thread in particular Creo Names. Need a Creo option for Navigation panel whereby user can set the primary model tree’s display from “Filename” to “Name”. This provides a path for our Digital Thread within Windchill to use the OOTB Windchill Filename, while allowing the specific project to use the customer “Name” to the contractual required standards. It’s important for Creo’s model tree to display the “Name” as the primary view in the model tree without taking up additional window spaces required to show the current default of “Filename” along with the selected addition of “Nam
1. Describe the ProblemWhen creating an offset plane, where you have selected an surface/plane to create the offset datum plane from as the first reference and then select and edge as the second reference, it jumps to the angled (offset) plane, and then you have to change it to parallel to get a parallel offset plane that is through the edge. If the edge selected was a point it works fine and the plane stays parallel.. What would be nice:If reference 1 is the edge and reference 2 is a plane/face it creates an angled plane.If reference 1 is a plane/face and reference 2 is an edge it creates a parallel plane through the edge.2. Are you using a workaround?manually change the plane option from offset to parallel3. What is the use case for your organization?when creating a parallel plane through an edge reference4. What impact does this problem currently have on your organization?more clicks to make a plane
1. Describe the Problem We are using ProGtolAttachGet() and ProGtolAttachOnAnnotationGet() to retrieve information about stacked geometric tolerances. We are having trouble acquiring information for three stacked geometric tolerances (gtols). An example image is attached for reference. When three gtols are stacked, both the 2nd (Parallelism) and the 3rd (Flatness) gtols are attached to the 1st one, making it difficult to determine which is 2nd one. Could you attach the 3rd gtol to the 2nd one, and the 2nd gtol to the 1st one? Additionally, we noticed that the position of the 3rd gtol is incorrect. 2. Are you using a workaround?No.3. What is the use case for your organization?To convert information into other type of files.4. What impact does this problem currently have on your organization?2nd and 3rd gtols are displayed at same position over rapped in converted files.
1. Describe the ProblemThe goal is to be able to have a parameter in each annotations (dimensions, notes, symbols, references, Gtol, etc) to retrieve the name of the combined state where she is displayed. 2. Are you using a workaround?There is no workaround with mapkeys or Pro/Program to do that3. What is the use case for your organization?We are deploying MBD in several departments of our brands, and by this way all the 3D models will contain PMI4. What impact does this problem currently have on your organization?We are not able to retrieve this information on 2D drawing for exemple, or more especially in 3D PDF. We need this information for internal control departments or for suppliers
1. Describe the Problemwould like to be able to export strings from EXCEL analysis. Currently, numerical values can be exported.2. Are you using a workaround?no3. What is the use case for your organization?Strings are sometimes used in relation and parameter creation.4. What impact does this problem currently have on your organization?He writes notes and then looks at them and types them in.
1. Describe the ProblemWant a function to clean up data files (.prt, .asm, etc.). If I use the same file for a long time and repeat modeling operations (create, modify, redefine, delete), old information is accumulated, so I want a function to erase them.2. Are you using a workaround?no3. What is the use case for your organization?Sometimes a previous PART file is copied to make changes and modifications.4. What impact does this problem currently have on your organization?Old information affects the creation of new relations and parameters.
1. Describe the Problem While there is a very limited API subset for rule based layer manipulation, there is a missing API related to determination of 'associative' attribute for rule based layer 2. Are you using a workaround?there are no known workarounds.3. What is the use case for your organization?retrofitting existing models with the new layers - need to query if an existing layer is ruled based and associative4. What impact does this problem currently have on your organization?removing of layer items from the existing layers is not possible for associative layers. removing the layer itself - opens a pandora box...
1. Describe the ProblemWith other topology tools, our engineers are able to specify a minimum and maximum thickness. These are often driven by the manufacturing method we are planning to use and supplier feedback. 2. Are you using a workaround?The "Material Spreading" constraint is a workaround if staying inside of Creo. It's just requires so much guessing and checking, leading to lots of unnecessary runs. Specifying values would be more straightforward for us. Not having min. and max. thickness constraints is one of many missing features which leads our engineers to use other topology tools outside of Creo from the start of their design process.3. What is the use case for your organization?We design lots and lots of castings, which generally have a min. and max. thickness to be successfully manufactured.4. What impact does this problem currently have on your organization?Inefficiency in Generative and engineers choosing to use other topology tools outside of Creo.
1. Describe the ProblemUsers have to solve for either structure or modal analyses separately in Creo Generative. We would like the ability to solve for these methods simultaneously as the part is experiencing these stresses together. Having the model accounting for both pieces yields valuable information that you cannot get from viewing these results separately as you can weigh the two against each other where one load might not be as significant as the other.2. Are you using a workaround?Running models in separate modes and trying to weigh these out separately.3. What is the use case for your organization?The use case is almost any part where we have a modal requirement and a stress requirement. Having the ability to solve both of these directly leads to learnings you cannot get from looking at them separately.4. What impact does this problem currently have on your organization?The impact is that this leads users to try other topology tools outside of Creo that do have this capability
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Automotive Industry. My role is Design Optimization Specialist. Stakeholders are all Creo Parametric users within our Company.2. What version of Creo Parametric are you currently running?Creo Parametric 73. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.When you create a swept blend and select a section, there isn’t a good way to quickly see where the points are that you can drag the arrow to. I have attached two images for reference. The first image shows the section is selected but there isn't an easy way to see where all 10 points are located. The second image shows an example of the user interface displaying where the points are located. 4. What is the use case for your organization?Several of the parts created by our organization utilize the swept blend tool. 5. What business
1. Describe your environment: What is your industry? What is your role in your organization? Describe your stakeholders.Space industry, Mechanical team lead. My group / colleagues2. What version of Creo Parametric are you currently running?9.0.2.03. Describe the problem you are trying to solve. Please include detailed documentation such as screenshots, images or video.We run generative design on our local machines. It would be nice to be able to add multiple design studies in a queue both structure and modal types, with different design criteria. For example through a drop down option for "Optimize now" or "Queue optimization" Then, when ready, click a button to start processing them. One should then also be able to choose to either process them sequentially or in parallel. This way one could set up multiple studies with varying parameters and set it to process over night.4. What is the use case for your organization?Shorter time to reach final solution.5. What business value would you
ModelCheck is able to check which tolerancing standard is selected on PRT and ASM (see https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/model_analysis/modelcheck/start_config_options/tolerance_type.html#). This start configuration of ModelCheck is also needed for DRW since these properties should not differ. Also there should be a check for the version that is selected (toolkit-value will be available for 7.0.8 https://www.ptc.com/en/support/article/CS359079). Field of usage: Using the right syntax ruels for GD&T: https://support.ptc.com/help/creo/creo_pma/r7.0/usascii/#page/whats_new_pma/detail-setting_syntax_tolerance_check_version_2.html
1. Describe the Problem Reference: Ticket - 17466086 Article - CS425857 PCB design is critical for our business. We would like a drawing table which can show a BOM of components of the PCB assembly. For example one row of the BOM table would show that item 150 is Resistor XYZ with a quantity of 5 and a description of ABC. However, we want one more column which will combine all of the reference designators from the model into one cell (from Parameter ECAD_REF_DES). For instance, it would say R1, R2, R7, R9, R13. The completed row would look like this: 150 XYZ ABC 5 R1, R2, R7, R9, R13 2. Are you using a workaround?We need to export data from Creo, using a mapkey, and then have a batch file try to manipulate the data. This is really not ideal.3. What is the use case for your organization?Generating a BOM within Creo that includes Reference Designators. This can then be used to easily cross-check to our ERP and ECAD
1. Describe the ProblemWhen features are hidden from the model tree they become dim in color. Some people might not easily the hidden items. I suggest that when you hide an item on the model tree you should be given an option to change the color of how they are displayed after they are hidden.2. Are you using a workaround?No there is no workaround as the color cannot be changed.3. What is the use case for your organization?People who struggle to see well might struggle to see hidden items.4. What impact does this problem currently have on your organization?It can reduce productivity.
1. Describe the Problem I have hand tremors so it is difficult to use the scroll button on the mouse for clicking and rotating the model. Creo View has options for mouse navigation under File -> Options -> General -> Navigation -> Navigation model. I have found ProductView selection meets my needs. Now in Creo I cannot find such options. I have searched Creo, the online help, and asked some Creo experts. Now I am here asking if there is such an option or if it can be added for a future update. 2. Are you using a workaround?No3. What is the use case for your organization?Can configure for peoples need4. What impact does this problem currently have on your organization?For me it is difficult to use Creo
1. Describe the Problem-When we split the harness using Split Harness Command, it does not separate Clips or additional components of connectors to other cable generated by split harness command. -Ideally, If we are splitting the harness then it should include everything on the other hand of location selected.-We have to manually add all the non cabling components to the harness. 2. Are you using a workaround?Manually add required non cabling components to the harness.3. What is the use case for your organization?Split harness will help to manage the complex harnesses.4. What impact does this problem currently have on your organization?Split Harness does not serve the purpose and it only splits the harness, not all components attached to that harness.
1. Describe the Problem If there is a hidden layer in the drw environment, request a change to exclude the hidden layer when exporting. (If the hidden layer has the same export layer name as the unhidden layer, export will not be executed) 2. Are you using a workaround?Temporarily change export layer name3. What is the use case for your organization?Temporarily change export layer name4. What impact does this problem currently have on your organization?Manual work is often required due to errors occurring during drawing changes.
1. Describe the ProblemIn contrast to scientific investigations in a theoretical environment, the development engineer is certain of a reasonably accurate representation of the environment. It is not enough to have fixed values for the boundaries; reality usually works with time-dependent influences (frictional heat, pressure peaks, heat shocks, temperature fluctuations day/night, etc.).This option is available in Creo Simulate, and the logical step would be to make it available in Live Simulate as well.Unfortunately, the value marked in red cannot be controlled by parameters or any other time-dependent value. An improvement to Live Simulate so that the input values can be controlled like in Creo Simulate would really be an enhancement. You can take the idea further and attach it to the analysis tool to allow automatic optimizations to run (especially considering the significantly faster GPU computing time). This improvement would easily double the value of Live Simulation.2. Are you u
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.