Recently active
In Modeling is a clipping plane:This clipping plane should be transferred from Modeling to Annotation:The clipping Plane should be enabled in the view properties:
HiI would like the option, when I'm creating or redefining a view in a drawing, to be able to do dynamic rotation of the view, just like when I rotate my model. Why do I have to prepare a view i my model before I make my drawing to get a non-planar view?...../Jon
Ordinary parts are identifiable in the structure browser by a green cube.Sheet metal parts have the same icon as ordinary parts.At present it is only possible to identify sheet metal parts by investigating their properties (e.g. if they have material properties or allow themselves to be folded/unfolded).It should be made possible to identify sheet metal parts at a glance (for example, they should have their own icon).
Update the spline creation in sketcher to include a node value along the spline when switching to control polygon mode.
Quite often we generate family table instances of parts which are similar except some dimensions or features. To generate (separate) drawings for each instance we usually generate one nice looking drawing of the generic (or some other instance). Then we save this drawing as copy under the name of one of the other instances, open the copied drawing and replace the model by the other instance. After the drawing has been saved again we have generated this way a copy of the original drawing for another instance.Because this procedure could be fully automatic I propose PTC to offer a software function in Creo Parametric, that allows based from any instance (or the generic) drawing to generate an instance drawing of any other instance (or the generic) of the same family table automatically.
Depth of Extrude is 216.51 at first I want to set default depth.if you make a small part,you can't look for handle of Extrude's preview.So it's hard that you control.I propose 2 ideas.1 . Setting default Depth of Extrude by config.pro.2 . adding small size depth in dashboard menu. ...like 2.png
If you create a 3D model you have to define plenty dimensions in different sketches. If you want to show them in the drawing you get all of them to select of.It would be nice if you can flag some of them as "drawing important". If you later create the drawing you would be able to select "show all drawing important dimension automatically". Especially if the model and the drawing are made by different peoples this option will save much time.
Add an option to change the values that are in scientific notation for decimal values.For Example, in the mass properties: 1.0e-3 to 0.001 Mass = 1.0634408e+07 to 10634408 KILOGRAM
Reference PTC document; https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS27008 The installation of ActiveX controls is not permitted on our network. This results in an annoying download request appearing every time someone selects view information in the embedded Creo browser. This behaviour unfortunately gives Windchill and CreoView a poor reputation! Please vote for this idea!
Creo 2.0 as 'Embedded Browser' support to IE and Mozilla browsers is existing feature for Creo 2.0 Google Chrome being used worldwide and many companies are adopting Google platform features for Enterprise collaboration including e-mail, calendar, meetings, data sharing -drive etc,
You can create solids or surfaces with many 3D commands including extrude, revolve, sweep, etc...Often times we create sweep edges using a surface as temporary geometry.Why not allow a geometry point in a section to create a curve feature directly if no other geomtery exists in the section?
I´m running Creo 2.0 M090 and it´s not possible to generate 3D-PDF with colored surfaces.We use 3D-PDF to discuss the products with our customers. They all have different OS and don´t want to install software to view the files. 3D-PDF fits fine to this requirement. The only bad thing is that the surface colors are not viewable in the 3D-PDF. We don’t need the surface colors to make funny rainbow colored stuff, it´s all about technical criteria. For example see the picture below:The opportunity to use colored surfaces in 3D-PDF direct from a future Creo release would bring us a great benefit in communication with our customers!Regards,DirkBy the way: We changed to Creo 2.0 from Creo/elements direct and there we got this opportunity.
the text will be easier to read. this works in drafting.
Store search results ( e.g. All curves with parameter diameter==6...) in a feature which can be used in the definition of another feature.At this time :Sketch a curve, pattern it 50 times. To project them on a surface you need to select 50 sketchs in the model tree.If you modify the pattern to 40 ==> projection fail If you modify the pattern to 60 ==> projection contains only 50 sketchs With The New Feature :Sketch a curve, pattern it 50 times.Insert the feature (search all features child of the 1st sketch) [result : 50 sketchs]Project them to surfacesIf you modify the pattern to 40 result of search feature : 40 sketchs ==> No fail If you modify the pattern to 60 result of search feature : 60 sketchs ==> Right number of projected curves
When a maching feature (such as a countersunk through hole) is created with a tolerance (e.g. ISO H7) then this tolerance should appear automatically when a dimension of this feature is created in Annotation.This should occur regardless of the type of dimension created (i.e. it should happen both with a linear dimension in a side view of the hole as well as with a radial dimension in a front view of the hole).It should not be necessary to have to use the module "3D documentation" for this.
I would like to propose the possibility to change for any existing parameter the type (e.g. for changing a real number into a string) without deleting the parameter and generating a new one.Reason:Especially in family table instances it is a very annoying thing if you want to change the type of one parameter which is used already in the family table.Alternative:If this is not possible or too difficult, then please allow to rename a parameter.Current course of action with the current possibilities: generate a new temporary parameter with correct type but new name, insert the new parameter in the family table and copy the complete column of the original parameter into the column of the new parameter. After deleting the old parameter,make another new parameter with correct type AND nameinsert the new parameter in the family table and copy the complete column of the previous new ans temporary parameter into the column of the new parameter with the correct name.Course of action with the ide
It seems simple, but the ability to edit the attachement of the baseline for an ordinate dimension would be very useful. Usually I find that loses it's connection when copying parts and the respective prints (not every time, that's just where I see it most). Also, why can't the baseline change at any time? As long as the line is parrallel it should be able to be moved at any time and the connected dimensions can update accordingly.
After having a hard time modeling pulley blocks in MDX it would be great to use belts. Unfortunately it´s not possible to define open belts, maybe this could be implemented easily,brMarc
Translation symbol and All Over symbols are added in Creo 3.0 referring to https://www.ptc.com/appserver/cs/view/solution.jsp?n=CS166180, please support other modifying symbols too.
When showing a dimensions symbol using @S there is currently no way of showing the dimensional tolerance on the drawing,other than manually entering the tolerances as follows; @S@++0.001 @#@--0.001@# which looses the associative link betweenthe tolerances displayed in the dimension and the tolerances themselves.There should be a radial button within the dimension display box that allows you to toggle on symbolic display (ratherthan having to enter @S) and Tolerance display should work exactly the same as it does for normal dimensions.
We are in 2014!! I desire a New Modern User Interface for all application in Creo.
It would be nice and effective if user can get the mass properties analysis for selected components or can exclude certain undesirable components from mass properties analysis.When we design a part by top down design method, there are certain parts that we have placed for references, for creating the newly desinged components. Now we need quickly to see the mass properties only of newly created design. I know there can be several way like restructure and all, but analysis with selected componenets will be a faster and effective way to compleish the goal.Regards,Jayanta Sarkar
It would be nice to have an option to nest indexes in table's nested repeat regions. Right now indexes reset at every sub-level of repeat region:There could be an option to "nest" those indexes, so they could follow index number of upper-level:
In Annotation it should be possible to create perspective views (see picture)
ProE/Creo forces a leader line to be perpendicular to the chamfer it is attached too. This prevents easliy changing the location of the chamfer to fit onto a dwg with a lot of dims.The current workaround is to hide the actual chamfer note, create a new note referencing the dim ID, but this is an annoying work around just to be able to position the chamfer note.Please.allow user to position chamfer without the need of the chamfer note to be perpendicular to the chamfer surface.Discussion Reference:Re: Chamfer leader line control?Idea Update on 05JUN2014: Along with the above listed type of control, Leader line jogs should also be allowed in Chamfers (and in rounds for that matter)! This is a very common need for us on part dwgs with a lot of dimensions. We rarely need a round or a chamfer without having to convert it to a note just to control the leader line:
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.