Recently active
In version 17 when projecting cross-section geometry to a workplane the user had the option of projecting regular geometry lines or construction lines. In version 18 this option dissapeared and only regular geometry lines can be projected with the project cross-section command. Please bring back the option to project either type of geometry.
This seems almost logical but I guess it must be stated:Why not add a "REGENERATE AND SAVE" button to the save conflict notification.
In Annotation the command projected reference point should be expanded, Circels and radiis should be recognized also. In the drafter, there is the command, which should be applied equal to function.
I am posting this on behalf of a colleague.He has a model which contains dependent mirrored features, but this also pertains to models containing any of the copy feature options.He has tried to redefine the parent feature of one of the mirrored features, but gets the error"References to additional 3d geometry may not be made, please select again'.The KB document CS51614 recommends to make the dependent copy independent, or delete it.That defeats the purpose of having a dependent mirror.He would like to request that parent features of dependent copy features be able to be redefined without the children having to be deleted or have their dependencies broken.
Adding the ecad-mcad attribute "npth/pth" to the hole feature dashbord, would improve the consistensy in the WoW. This shall also include the visibility in the model if "pth" is selected, a suggestion would be to generate a ecad teature on both sides of the "PCB". The size/type of that ecad feature to be controled by a config file, simular to the "thread" settings.
Change the way to describe coppar areas or openings in solder mask to an ECAD feature instead of working with "other outlines". This would improve the consistensy and logic in WoW.
We (users) are having real problems with dialogs not being adjustable. This is problematic in many places where relevant data is truncated and there is no way to adjust the dialog to compensate.One example has been issues with the Creo 2.0 Appearance Manager but this is only 1 of many dialogs that behave this way.We need to have dialogs be more flexible with user intervention rather than these arbitrary locks.This example shows how the software can adjust itself, but not by users: Video Link : 3819 This is the locked datum plane dialog:Using the relation/parameter dialog causes these really obscure locks and drag methods. Nothing intuitive about it but the persistent user will find how to manipulate this.Is there really a reason not to move UI dialog windows to the 21st century?
I would like to see functionality in Modelcheck that could verify and correct settings for mcad to ecad information, such as:Hole settingsecad features on correct layerEcad parameters/Thomas
Hi, I've been living with this for a long time and I have to beleive there is a way to make it happen. I would like to show my hole notes, and I would like the arrow to attach to the edge of the hole, but point to the center of the hole. If I create the hole in different ways, I get different results. If I create the hole with the hole tool, and use the drag handles to locate my hole, when I place the hole note in the drawing, the hole note is placed on the edge of the hole, however it does not point to the center of the hole. In this case I end up re-attaching it, and it is still not perfect. If I create the hole by first sketching a point, and then creating the hole on the point, when I place the hole note in the drawing, the hole not is place on the center of the hole. In this case, I once again re-attach the note and it is still not perfect. This is my preferred way of creating holes because I am usually creating a hole pattern on sketched points. I have found that regardless of ho
When making the command explode in configurations is possible to see during the command wireframes which indicates movement of the parts.Will be very helpful to keep it after the command is finished because many times those lines are needed on the drawings and actually many customers make them manually in Annotation.Now wireframe is viewable in Annotation, so is enough to automatically create a container with exploded movement wireframes inside.
Current situationThe config.pro option "dm_checkout_on_the_fly" controls the following (from PTC description):"Controls the default action presented to the user when Check Out on the fly dialog comes up"This option does not list all new available choices for the Conflict dialog box.Available choices for the config.pro option "dm_checkout_on_the_fly" at the moment:checkout*continueAvailable choices in Conflict dialog (see screenshot below, click to enlarge):ContinueCheckout out nowRevise and Check out nowMake Read-only(in some cases: Check out entire family table)(in some cases: Revise and Check Out Entire Family)Available choices in Conflict dialog (see screenshot below, click to enlarge)What should be doneAdd the following config.pro option value to "dm_checkout_on_the_fly":"Make Read-only" - suggestion for option value: "read_only"Why this should be done?The option value "Read only" would prevent unwanted changes of objects that the user is not allowed to change, see the following us
With the following unsupportet switch, the color scheme can be changed:(uib::win-set-skin-style :silver) (uib::win-set-skin-style :black) (uib::win-set-skin-style :blue) (uib::win-set-skin-style :creo)This should be a standart function.
As of now, Analysis -> Mass Properties shows mass and CG data for the componenets / sub assemblies in the top assembly. Allow option to expand that to include all components in all sub assemblies as well. This would be a mass and CG report top to bottom of an entire assembly.Currently you have to manually combine the report for each sub assembly and there is no easy way to get CG data for a component in a sub-assembly relative to a top assembly CYS. It would also be nice if this was available in a .cvs output option.
If I create Standard hole (Iso Hole - ...M8, M10, M12, etc.) system automatically create diameter symbol for dimension. Then, if I use Show dimensions in drawing mode - I have to find all Standard hole and change manualy main dimension to symbol M (inside dimension you can hide - it is not necessary show this information):
Add ability to display tolerance limits to dimensions in Family table repeat regions so that the dimension limits can be displayed in a parametric 2D repeat region on the drawing. A dimension of a designed part on an engineering drawing is often useless without a tolerance, yet there is no clear way to display several dimension limits in an associative/parametric repeat region table. More than 80% of the time we have to break the associativity with the model, turning the table into dumb text (i.e. breaking the connection with the model) simply because we cannot display tolerance limits! It strikes me as ironic (and frustrating) that PTC's (Note that P stands for PARAMETRIC) 3D design parametric software still cannot display parametric driving dimensions on an Engineering Family Drawing in a repeat region table thus requiring the user to break the parametric dimension into dump text; which is always a bad practice for any dimension! What is a design without toler
Each time a new section is created in Creo 2.0 in a pre-Creo 2.0 part or assembly a warning message appears:It would be great to suppress this message as it can disturbe the user
We are currently trying to replace some drawing views with the "combined state" approach in CreoParametric and CreoView. The functionality in CreoParametric allowes to create nice looking "combined states" - even sections are looking good. In case you want to display axes(or other datums) in the combined state - no problem. Very good and robust functionality in Creo Parametric. Unfortunately in Creo View datum Axes display is handled different - it's not driven by the combined state but by a general "Filter" that applies to all datums of this type (e.g. axes). We need to have combined states that look exactly the same in CreoParametric and Creo View to progress on our MBD Vision. Datums should follow the same rules in CreoView combined states view like in CreoParametric combined states.
Need config option to define the color and thickness of imported curvesToday:- The thickness of imported curves is considered as geometry (too thick for us).- The color of the curves is not controlled and varies if you import an IGES or a STEP.
- Need new option in “Reorient” menu to be able to orient an object "Normal To" a selected plane or planar surface without a secondary reference.- Or have an icon to directly orient an object "Normal To" a selected plane like it is possible in SolidWorks.Actually, we use a mapkey that starts a sketched curve on a selected plane or planar surface (this automatically orient the sketch to this plane with the option sketcher_starts_in_2D yes) and then abandon the operation. The problem is if you run the mapkey on a non-checked out object it will be considered as modified.In SolidWorks, by clicking on the "Normal To" icon in the View Orientations tool bar it will set your object normal to the screen; clicking it again will flip the sketch plane.
A system Parameter containing the working directory path would allow a drawing to be documented with the directory file location in which that drawing was developed. A requirement of some quality control procedures is to know and record the file directory of the source of the document. A Creo system parameter that can be accessed within a drawing would allow this to be parametric instead of having to enter the path manually. This would be a 'Creo' system parameter - available within drawings without the use of any product data management.
When placing and editing a drawing view, enable the use of the view outline corner drag handles to dynamically change the custom view scale! This simple visual method of placing/sizing views would save considerable time.
In Creo Parametric 2.0, in French, in the Sketcher, the pop-up menu command LINE has the translation “Chaine Ligne”. (It was not the case in the previous version).In French interface, the first word to sketch a line is: CHAINIt is not ergonomic to read CHAINED LINE in French interface (Chaine de Ligne).Users trying to sketch a line must find the word LINE firstIn English, it is OK -> LINE chain^Proposition: Rename "Chaine de Ligne" to " Ligne Chainée"
It would be helpful to add a way in the individual accounts to show what tutorials you have/haven't watch. This way you could sort through them and watch new ones as time permits so that you don't have search and try and remember which ones you have already viewed:http://learningexchange.ptc.com/tutorials/popularYou could mark ones that are interesting or important to you and you could go back to them. Also, Learning Exchange could also recommend ones that you haven't watch already.
In sketcher, be able to add symmetrical constraint contextually with popup menu.2 entities + 1 centerline -> Popup menu -> Symmetric
At present it is only possible to copy the properties of a view to another view.It should be made possible to copy an entire view. This must automatically create a new and independent item within the viewset in the 3D model.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.