Recently active
When will the presentations and videos made available for people who couldnt attend the event.Regards~Syed
One way to use mapped mesh in the model is to set up some volume regions. I used one mapped mesh in the model below. You're using the wedge element on the rounded ends, and those elements will give you a different color. Will this work for you?
Note: All the credit for this example goes to Neal Hagermoser of PTC. He put this together for a customer to show how to auto create things from the edge.This example covers:> C –SDK - Creating infotables - Creating datashapes - Calling platform service - Accessing values in infotables> Platform - Creating a new thing from a serviceThe zip file contains a pdf document that explains the example as well as another zip with the source and entities for the example.
Visualization of Assembly FeaturesBeginning at Windchill 10.2 M030, visualization of assembly features in dynamic part structures can be enabled by setting the user preference Visualization ▶ Dynamic Structure ▶ Assembly Features in Dynamic Part Structures to Yes.Visualization of assembly features in dynamic CAD structures can be enabled by setting the user preference Visualization ▶ Dynamic Structure ▶ Assembly Features in Dynamic CAD Structures to Yes.Use Case — A WTPart Structure is associated to a CAD assembly that has assembly features and flexible components. The default representations of all assemblies at all structural levels are published as a non-positioning assembly or as extended positioning assemblies. You cannot publish an assembly that has assembly features as a positioning assembly. When dynamically viewing the part structure, the assembly features and flexible components must be displayed.Enabling assembly features has some limitations, and should only be enabled if t
Hi,I can't save settings (ribbon customization, windows size and position...) Every time I start Creo Parametric 4.0 it starts as if it is just installed.I've tried to change the PTC_WLD_ROOT but nothing is created into the folderHow can I save my customizations?
Slides from 2016 TC Session Queue Management Strategies
Retrieving an assembly in Graphics or Automatic rep will allow to measure on the graphics Light surface data from pick-point to pick-point. Measuring distance between geometry and graphics data is also possible.Measure Summary and Measure Distance are both supported.
The Regeneration traffic light has be replaced by the regeneration status icon. This new icon will only become active when regeneration is required.Mass properties outdateness is now reported in the Notification Center.
The View Manager now also contains a tab for Appearance states.From the Appearance tab you can create a new Appearance in several ways, like:Selecting New.With the Default Appearance active, using the Right Mouse Button (RMB) on the Appearance name and selecting Copy to copy to a new name.With the Master Appearance active, using the RMB on the Appearance name and selecting either Save or Copy. If the Master Appearance has been changed Save will be available, which will save it to a new appearance. Otherwise Copy can be selected.Each Appearance state can be given a description, selecting Description from the the RMB menu on the Appearance name.Appearance states can also be used in combined states.
Create figures of the CAD model in Creo IllustrateGenerate a PVZ file with using >File >Publish >Publish in Creo IllustrateThe attribute "Figure" must be added to the <image> tagFind the DTD where the <image> tag is defined.In the file commonElements.mod add the yellow linesIn a XML document add the PVZ image several times with selecting different Figure nameOpen the stylesheet and select the <image> tag in the documentIn STYLER the <image> element EveryWhere is selectedSelect on the keyboardIn the Attribute list select "Figure" and check the "View" ratio buttonRefresh the stylesheet and save itIn the XML document modify the attribute for each image elementSelect the Figure name in the Figure attributeSave the document and publish to PDF.
Take a look at this video that shows the overhaul the Analysis and Design Study Experience:- Filtering diagnostic option to show only relevant analysis information - Dynamic analysis status showing the elapsed time and activity- Expanding panel to show the analysis run status and convergence plot
Negative extrude doesn't seem to function with taper option on. Is this suppose to be like that?Negative extrude:Negative extrude with taper:
I imported a model and nothing shows up as far as visible geometry. However, when I go to layers and select SolidGeom, I can see the outline of the part. Is there a way to see the actual geometry, or did I just get a bad import. Thanks in advance.
Thanks for the reply. I posted this because I have little experience with layers. But your solution worked, and I liked your explanation prior to the solution. I always wondered why I couldn't see the geometry on these imports.
Richard,Do you have the same problem if you're using the IPS system of units?
LiveWorx users be warned. There are no paper maps or session schedules included in the registration packets as in previous year. You are now forced to either use the app or print the maps and schedules off yourself in advance. Wish I would have know this before I got here...
Interesting.
I'm using Creo Simulate 3.0 (M090) commercial.
I'm not seeing that "problem", as shown below. The legend values are not in engineering format. This is displacement, and the same format shows for stresses.
The first thing I would do is move this discussion to the Analysis and Simulation group. I don't know of a way to format the legend numbers, but now that it's been brought up, I will look into it.
Screenshots please!
I wonder if it will be an additional cost to the core? Time to call my sales rep.
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.