Recently active
Hi..We want to know, is there any changes done in Pro/toolkit in creo4.0. Is our existing creo2.0 protoolkit application codes will run as it is or need any major change ?please can anybody explain in detail. As no any sample code is given in sneak peak tool to explore.Regards,Prashant Pandarkar
I'm looking for the constants properties file that contains all of the text tags and labels in English. I want to update some of the labels using IPCS_CUSTOM_LABELS but I don't know what the original label names are.This used to be loaded in the /webapps/Partsplan/WEB-INF/jsp/properties folder (or something like that). In version 10+ this file was moved to a compiled class file and I don't know the location or the name of the class. Can someone tell me the folder name and filename of this class? I can take it from there.Thanks!!Kathy Billinghurst
HiHas anyone tested the new tools for re-ordering and refitting Reference Designation labels ?If you have what are your thoughts?thanks, Jim
Tip na rychlé skrývání a zobrazování rovin při práci v sestaváchPři práci v sestavách mi pomohly makra pro urychlení práce s rovinami (makro na zobrazení rovin (sd) a skrytí rovin (dh) je v příloze). Po zadání makra ukažte na požadovaný díl. Marka zapínají a vypínají viditelnost hladiny „PLANES“ ve vybraném modelu sestavy. Video Link : 7108
I was glad to hear that we were going to be able to import images (jpeg, pdf, etc) into drawings finally WITHOUT using OLE. I just tried importing two jpegs (207 KB and 115 KB) into a drawing in Creo 4. I saved the drawing and the resulting drawing file was 10 MB. I think someone forgot to maintain the jpeg compression after reading it in. I'm just guessing, but that is a logical conclusion. That is exactly the same problem that OLE has had; it converts everything to a bitmap and stores it in the drawing file as actually two copies of the bitmap. It makes for HUGE drawing files when you want to use pictures or imported PDFs in a drawing. It appears as if the same is still true. The message that I would like to emphasize to PTC is simple. Store the imported image in the Creo drawing in the compressed format that was originally there upon import. DO NOT convert to a bitmap and store it i
Thanks for the presentations. A lot of material to review.
A good presentation with well thought-out flow charts, but I didn't see anything related to surfacing.
Community,Is there a way to change the size of the text after creating a note with a leader in exploded views? I have not been able to find a config option or any other way to change it, and the Text Style dialog has the Height and Thickness grayed out, as shown in the below image. Thanks in advance.
Enhancement Request:Remember the size of the View Mananger window. I have assemblies with several simplified reps, which in the default size are not all visible. Every time I open the View Manager, I have to either resize the window or scroll.Remember the size of the model graphics area in the Redefine Simplied Rep window. Again, I have to resize the graphics area every time because I want is larger than the model tree area.
Nabídka volných míst:Asistent / Asistentka obchodního úsekuInside Sale Representative NOVÁ POZICE V OBCHODNÍM TÝMUObchodní zástupce HLEDÁME OBCHODNÍKY DO PLZNĚ, CHRUDIMI I DO ZLÍNASystémový administrátorSoftware DeveloperObchodní (aplikační) inženýr/ka - Software ConsultantPracovník technické podpory zákazníků - Services Engineer HLEDÁME KOLEGY DO KANCELÁŘE VE ZLÍNĚ A V CHRUDIMICAM SpecialistaVÝVOJOVÝ KONSTRUKTÉR / KONSTRUKTÉRKA TECHNICKÝ VÝPOČTÁŘ / VÝPOČTÁŘKA MECHATRONIK / MECHATRONIČKA
As I know, CATIA V6, NX 11, Solidworks 2017 and Solid Edge ST9 are cloud based software, is there a plan to make Creo as a cloud software?
Please add following infos to your new Product Idea:Current Software Version:Technical Area:Business Impact:Number of User:Occurence:Workaround available:KB internal ID:PTC Case ID:Describe your Product IdeaAttached you will find additional infos.
So, in the middle of porting my PDMLink 9.1 customizations to my 10.2 server. One of those was a "hack" for the BOM reports drop down list. Basically, my report is a combination of MultiLevel BOM Report with Replacements but only a single level. That makes it a single level BOM report with replacements. In addition, I added a custom header and related documents table at the bottom. The great thing is that its printable.This is not it but what I am dealing with. This is NOT printable. You cannot have a scroll bar that cuts off some of the columns from the printed output. I will get to that later. For now, I just need to get the hook in, the link in the drop down list. I found the action and action model that controlled this, created my resource bundle, posted to the server and then...nothing. Checked for typos, fix them and ...nothing. Finally, I stumbled across an example in the Customizer's guide, page 1476, PSB Ribbon Customization. It comes with these warnings:You can ad
Hi community,I am actually developping an application with MQTT extension provides on marketplace. However I encounter a problem. If I create a new MQTT thing with the composer, it's directly active after I pressed save in the composer but if I want to create programatically an MQTT thing with a service then the thing isn't active by default and I need to edit and save the thing in the composer if I want it works.Someone know how to do it to active an MQTT thing created with a service?Regards,Anthony
Hi..I am using Mirror component command and in this want to mirror sub assembly with its feature but the option is not getting highlighted, so please can you suggest.Thanks,Prashant
When moving a dimension or geometric tolerance with an attached datum feature symbol, the initial datum feature symbol occurs twice, see belowAfter moving the view, the initial datum feature symbol disappears
Worked OK with rendering a few days ago; now it crashes...Description: A problem caused this program to stop interacting with Windows. Problem signature: Problem Event Name: AppHangB1 Application Name: xtop.exe Application Version: 32.0.2016.190 Application Timestamp: 575006f5 Hang Signature: 59a9 Hang Type: 0 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Hang Signature 1: 59a9c3366f7af092aa861babb3a59324 Additional Hang Signature 2: bfc5 Additional Hang Signature 3: bfc55fa08a34b3bb66735e86881aa2d4 Additional Hang Signature 4: 59a9 Additional Hang Signature 5: 59a9c3366f7af092aa861babb3a59324 Additional Hang Signature 6: bfc5 Additional Hang Signature 7: bfc55fa08a34b3bb66735e86881aa2d4 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
Good question. Wouldn't that depend on the amount of features you need for an end product? I know that you have face/vertex/edge for each element and you can move the csys to each, depending on how you want to shape the geometry, and there is a continuation of functionalities per face/vertex/edge. I'm still learning Freestyle, because I've only had one 2 hour class on it. I try making a rough sketch of my product (pencil) to determine what I need in Freestyle. But that may not be the best approach. I'm interested in hearing a good solution to this.
So for orders 4 - 9, it's still 7546N?
After correcting the error in the Creo model, how long did it run before a solution was realized?
Another example.
Great presentation.
What about setting up a series of runs on a simple contact model and see? Each run would be p1-p1, p2-p2,.....p9-p9 for a total of nine individual runs. Would this provide the solution?
John,Any objection to making your model like the one below? Sockets that I have seen don't use a swept blend. Do you have a special requirement to make it with a blend?
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.