Recently active
Hi Parth,If your file is not a student version, please feel free to upload it, and I can take a look at it. To upload a file, go to the "Use advanced editor" link in the upper right hand corner when you reply. Welcome to the forum.
Material properties for S235:http://www.matweb.com/search/DataSheet.aspx?MatGUID=045930e40a0f43ec8b0935acd039761d&ckck=1
It sounds like you're concerned about the stresses on the floor and not in the fasteners. Right?
This is a great video, but I don't think this is hypoid gearing. With hypoid gearing, the center axis of the driving gear is offset from the center axis of the mating gear, as shown below.
David,Is this a real component? I'm asking because it's so massive (70" tall, 79.76" OD, 67.5" ID, and 19841 lb). This is supposed to go in a basement? But to answer your question, in order to use the advanced fastener tool, you need two components. In this case, the floor and the cast iron part. The first thing that needs to be address is what is the floor made of? If it's concrete, concrete is very poor in tension, but excellent in compression.
I found CATIA V5 very easy to use. It reminded me of WF5, with all those tool bars and pull-down menus.
I just came out of a 9-day CATIA V5 class, and I must say that the CATIA sketcher mode is not as advanced as Creo, and it takes more clicks of the mouse to constrain elements than Creo, but the instructor stated Dassault is working on it. We won't talk about CATIA V4, because that's about as old-fashioned as you can get and an absolute nightmare. V5 does has some nice predefined tools in sketcher mode, but does lack the concentric circle/arc function.
Community,I've created a cross-section view on three components with hatch marks for aluminum and ANSI34 (plastic/rubber). All the hatch marks are created in BLUE, by default. When trying to change the hatch marks to BLACK, only half of the hatch marks for aluminum turn black, and one out of four per hatch set turn black for ANSI34, as shown in the below image. What is the solution to make all the hatch marks black? Thank you.
I'll have to open your model and take a look. My previous post was for general knowledge.
Bernie,How would you compare Creo's AFX (Advanced Frame Extension) to SW? Please see the below link.http://www.ptc.com/cad/3d-design/structural-framework-and-weld-design
Matthew,I found that the easiest way to change all the hatch marks at once is to change the system color as shown below. The path is:File>Options>System Colors>Graphics>LetterSelecting black will change all the hatch marks to black. The reason I wanted to do it this way is to put images in a technical publication, because everything in the pub is black.
As previously announced, PTC ceased distribution of Arbortext 5.4 and earlier versions due to legal restrictions on 3rd party components starting on September 30, 2014. Because of this change, PTC no longer allows new sales of licenses for Arbortext version 5.4 or any previous versions. A customer who purchases a new license for Arbortext should download and use version 7.0.If you currently own a license for Arbortext 5.4 or earlier and need to regenerate a license key for that existing entitlement, you will now be required to log a case for License Management. Customers may no longer use the automated license manager for this request. It is manually handled by PTC's license management team via the case logger.
Nice rendering in SW. I was wondering if anyone in this post is willing to shed some insight for the attached link. It's one of those discussions where someone thinks SW is far superior than Creo. I would love to give some input on this, but I've never used SW, where I know you all have, and even teach it. https://community.ptc.com/t5/System-Administration/Why-is-Creo3-so-old-fashioned/td-p/200950#465636
Now we have an answer:Creo 3.0 = old-fashionedSolidworks 2016 = new-fashioned
Yes, CATIA V5 was introduced in 1998, however, the V5 version that was taught to us was V5-6R2013, not the 1998 version. Our instructor stated that there wasn't a lot of difference between V5 and V6, but I agree, we should have been taught in V6. But management makes the decisions around here. V5 files are supposed to be forward compatible with V6, because they use the same kernel.
This is why you turn "Fix Separation" to Off and insert contacts.
The files we receive from Boeing and Sikorsky are in V5 and some still in V4.
Never encountered that message.
In this discussion Scaling an Assembly, Scott Morris has marked a couple of answers as "Helpful"...I thought that had went away with the Jive update some time back.I'm curious how he did it. It's not his discussion originally.
From August Mitrais research report, ThingWorx came out on top even though it was only v6.0 of ThingWorx that was evaluated..." Conclusion...Using our criteria, ThingWorx achieves the best score. It provides a solution which can be deployed in a Local Network or in the Cloud.Azure IoT, AWS IoT, IBM IoT and Oracle IoT are also good options, but currently only support Cloud solutions. They do, however, offer many features and provide integration to other platforms.With Azure IoT, Microsoft is aiming to make it's product available cross platform, so this will ultimately be a benefit to customers.Kaa, being open source, provides freedom and flexibility for customers to implement a range of solutions.ThingSpeak offers only cloud service and also receives the lowest score. However, like Kaa, it provides freedom and flexibility for customers to implement a range of solutions.However, ThingSpeak and Kaa may be less productive because both require the building of features which are standard off
Has anyone successfully uninstalled the Creo 4 beta yet? I would like to uninstall the first Beta version that Jim provided in order to install the newer build that was uploaded.I try uninstalling from Control Panel and nothing happens.I try uninstalling from C:\PTC\Creo 4.0\U300\InstallManager by running uninstall.exe as administrator. I get the dialog box below.I try uninstalling from C:\PTC\Creo 4.0\U300\InstallManager by running silent_Group_Uninstall.bat as administrator. It pulls up the Installer, asks me to login, and then hangs and does nothing.Has anyone had some success in removing it? And if so, how?Thanks.
Good day Gents,It has been reported to me by Binesh that some "questionable" emails have been sent out and a copy is below.Have you seen:1. Similar emails2. From the same or different accountsI have disabled this account.juliana hajiHello My Dearest One! My name is Miss Juliana Haji , it is my great pleasure to contact you after viewing your profile from here,I will be very happy if you can write me back through this mail (juliana_haji@ymail.com) to know all about each other, and also give you my pictures and details about me, though, i have something VERY important to tell you. hope to hear from you soon !Have a nice day !Miss Juliana. (juliana_haji@ymail.com)Thank you,Toby
Good day Gents,I am sure you have seen we are having a views issue in the community - thanks Marc DeBowerI have been told by Jive this is a bug and once we upgrade to 9, this will not happen again (fingers crossed).I will post again once this has been resolved: at least everyone can still post and respond to content.I have posted an networking opportunity with the Networking Group PTC and Boston Engineering Coming to Rochester NYIf you have any questions, please let me know and forward to those you believe would benefit. Best,Toby
A user of mine received the following message when attempting a check in:"EPM Document Master "body1.prt" is not unique. It is not even a good design. Even if I could check it in, I wouldn't. You have so many referential integrity violations that I stopped counting. Did I mention you are not even authorized for such a secured action? Go back to you model and build rules and stick them where the subsume links don't shine.Well, not really. We tried collecting funny error messages back in PDMLink 8.0. Our goal was to list them all and then provide Klingon to English translations for them (no offense to the Klingons in the room). In addition, it would help the users figure out how to fix the issue and /or work around it. I have a feeling that there is a master resource bundle that contains all of these. I am just not sure how best to organize it. I can post this in a wiki doc that we can all contribute to. Obviously, solutions depend upon the build code you are usin
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.